Halloween wood tags, how to DIY your own set of cute spooky mini tags

DIY WOOD TAGS FOR HALLOWEEN

I just love these adorable rustic wood tags! Since they are so small they make such perfect little accents to your décor. Especially these Halloween wood tags. I made these adorable little guys and placed them in my Halloween porch décor. Oh my goodness they look so cute with all the orange, black, and rustic-ey decorations!

If you love this tutorial be sure to check out these mini wooden fall signs

If you don’t have all the tools/materials to make these little wooden tags from scratch you can grab a DIY CRAFT KIT HERE.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

This DIY HALLOWEEN CRAFT KIT COMES WITH

• 3 precut and lightly sanded 5” wood tags

• professional outdoor grade vinyl cut outs

  • HAPPY HAUNTING

  • spider web image

  • OCTOBER 31

• detailed picture instructions

• ****paint and brushes are NOT included

If you don’t need a DIY CRAFT KIT here’s what you’ll need

• black, orange, & white vinyl

• transfer tape, here’s one with gridlines for easy application

• vinyl squeegee

• black and white paint

• paint brushes or sponges

• sandpaper

• twine

• 3 wood tags 5”, I cut mine from a 1x4

• Cricut cutting machine

• green Cricut mat

• Cricut Design space

• HALLOWEEN SVG’s

• I also recommend using a drop cloth to protect your crafty surface

Want to know how I make my wood tags? Click here to read my post on DIY MINI WOOD TAGS, it also includes a video tutorial.

After you have your wood pieces cut out, sanded and your vinyl decals cut, weeded, and transfer tape applied you can start on the steps below.

If you want to learn how to cut out your own wood tags read this post. If you are new to Cricut, or the world of fancy cutting machines in general, check out my post on the 10 must have accessories and supplies to get for a Cricut newbie

1. PAINT

Paint 2 of your wood tags black, one coat will be fine for this, and 1 of your wood tags white, this will need 2-3 coats. Let dry. Letting your wood tags dry completely is a MUST. If your paint is still wet when you move on to the next step your vinyl will not stick to it.

2. DISTRESS

Using a piece of sandpaper distress the edges. You’ll want to focus on the edges and any area that you think would have a natural wear to it.

Then wipe with a lint free cloth.

3. APPLY DECALS

Be extra sure that your paint is completely dry before you start this step. Vinyl does not stick to wet paint.

Using your vinyl squeegee, a plastic rewards card will also work for this step, rub the front of your Halloween themed vinyl decal.

Flip it over and do the same thing on the backside.

Then peel the paper backing away from the clear transfer tape, your design should stay attached to the clear transfer tape.

Flip your vinyl decal sticky side down onto your wood tag. Don’t push it onto the wood tag until you are happy with the placement, then press it down. Use your vinyl squeegee for this step. Then remove the clear transfer tape.

Start on one corner then slowly peel your way to the opposite corner. If your decal comes off with the transfer tape just press it back down and slowly roll the transfer tape away from the decal again. Be sure you take your time during this process, especially if you are new to the decal game.

BLACK TAG: HAPPY HAUNTING decal

BLACK TAG: OCTOBER 31 decal

WHITE TAG: SPIDER WEB IMAGE decal

4. TWINE

Add some twine to make them even more adorable! Feed the twine through the hole in the top middle of the tag. Then tie the two twine ends together.

You’re all done! I hope you enjoyed this DIY craft tutorial. If you have any questions please ask in the comments below.

Happy Crafting!

DIY mini wood house family number sign

DIY how to make a rustic wood house sign for your farmhouse style home decor

How to make mini wood houses from a 1x4. Stenciling a wood family number sign. DIY rustic farmhouse decorations to make at home, easy

Have you seen those adorable tiered tray signs on Pinterest? They are oh so tiny and oh so ADORABLE! They tie in perfectly with any rustic farmhouse style décor. If you have a miter saw you can make these little beauties at home.

If you don’t have a miter saw but still want to DIY these mini wood houses no worries! You can grab these precut unfinished wooden houses in my shop.

I used a scrap piece of 1x4 to make mine. Click here to read more of my SCRAP WOOD PROJECTS.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional

Are you planning on making LOTS of signs using stencil film? You must read how I save TONS of money by buying my oramask stencil film this way.

Click here to grab your own rustic wooden mini house DIY CRAFT KIT

Make your own tiered tray mini house signs

Here’s what you’ll need to make your own mini rustic wood houses

• 1x4 or precut wood houses

• miter saw

• sander

• 120 grit sand paper

• Cricut cutting machine

• Cricut Design Space

• Green Cricut cutting mat

• oramask stencil film

• transfer tape

• vinyl squeegee

• white and black acrylic paint

• paint brush

• family number SVG

1. CUT OUT YOUR WOOD HOUSE

The first thing I did was to cut my wood house out of 1x4 scrap piece of pine. Well, my husband cut mine out because he was bored lol. He cut them using a 30 degree angle on the miter saw. Then cut them to the length you want. The one I’m making for this rustic craft tutorial measured approx. 4” in length. Then I sanded it down using my Ryobi orbit sander and 120 grit sandpaper.

2. CUT OUR YOUR STENCIL

I used my Cricut explore to cut out my stencil. I have yet to get a Cricut maker because my Explore is still going strong :)! I used a scrap piece of ORAMASK STENCIL FILM and this FAMILY NUMBER SIGN SVG. I’ve found that using an xacto knife to weed your designs works even better than traditional weeding tools. If you’re new to CRICUT be sure to check out these 10 supplies and accessories you need to get started with your Cricut.

3. PAINT YOUR WOOD HOUSE BASE

I chose to keep my mini wood house sign simple and paint it all white. I used acrylic paint and painted two coats for a decent coverage. Let completely dry.

4. STENCIL YOUR WOOD HOUSE

I stenciled a family number sign on my wood house and I love how cute it turned out. I applied my stencil using transfer tape and a vinyl squeegee. Then removed my transfer tape once it was properly adhered. If you don’t want any paint bleed be sure to seal your stencil. you can do this using the same paint as your background color. See how I also did this on a reverse stenciled sign to get crisp no paint bleed lines. Let dry.

5. PAINT YOUR STENCIL

I kept it safe and painted my family number stencil with black acrylic paint. I did one thin coat. Let dry completely. Then painted a second thin layer.

6. PEEL UP YOUR STENCIL

While your stencil paint is still wet use a sharp xacto knife OR sewing pin to peel up your stencil. Be careful not to guage the wood underneath. You want to carefully lift the stencil film up off the wood then grab it and peel away.

7. DISTRESS

If you like your sign without distressing then you are ready to display it once the lettering is dry. But if you’d like to add a little more rustic charm to it you can do so with your sander, after your lettering is dry of course. I use 120 grit sandpaper for pretty much all of my craft projects and it’s what I used to distress this mini wood house sign too. Focus around the edges and corners then lightly go over the front of the sign. I went a little crazy on my mini wood sign but I still like it. I think it just adds that much more character.

CLICK HERE TO GET INSTANT ACCESS TO ALL OF MY FREE SVG’S, PRINTABLES, AND MORE

Now you're ready to display it in your home. I hope you enjoyed this crafty tutorial. If you have any questions please ask them in the comments.

Happy Crafting!

DIY 4th of July painted wood stars

HOW TO PAINT FREE STANDING RUSTIC WOOD STARS FOR YOUR INDEPENDENCE DAY DECOR

These DIY wooden stars are sure to tie in perfectly with your patriotic décor. Whether your red, white, and blue decorations are seasonal or you leave them up all year round you'll definitely want to add these adorable wood stars.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

These are especially a perfect project for those scrap pieces leftover from other DIY projects. Click here to see how I cut these out using my Cricut machine and Ryobi scroll saw. If you don’t have all the tools to make this craft happen or just don’t have the time you can grab your DIY craft kit here.

Watch the how to video below or keep scrolling for the written rustic 4th of July stars tutorial

Here’s what you’ll need:

• FREE STANDING WOOD STARS (grab your craft blanks here)

• RED, WHITE, AND BLUE ACRYLIC PAINTS

• PAINT BRUSHES

• SANDPAPER

These little rustic wooden stars are SUPER EASY to paint. I am actually thinking about making a few more and staining them instead of using paint. But for now I’ll admire the red, white, and blue ones.

ONE- Paint a thin layer of RED, WHITE, or BLUE paint on each star. Let dry. After the first coat is dry go back and add a second layer of paint on each of the three stars. Let dry.

TWO- Once your stars are completely dry use your sandpaper to distress them. Focus on the edges, corners and lightly on the front/back of each wood star. I use 100-150 grit sandpaper when sanding these by hand. If I use my orbit sander I use 120 grit.

THREE- Use a lint free cloth to remove all the dust from sanding the wood stars. You can finish them off with a polycrylic spray or wax. I didn’t use antiquing wax on these but if you wanted to make them extra rustic try using these techniques for dark wax.

DIY 2x4 chunky wood flag

HOW TO MAKE A PRIMITIVE AMERICAN FLAG

I love a good scrap wood project. That was the inspiration behind this DIY chunky wood flag. I have shelves full of scrap pieces of wood in my workshop, aka my garage lol! I just can’t bring myself to toss out perfectly good pieces of future projects. I had been wanting to make one of these 2x4 flags for a while now and since we are all on lockdown I thought now would be the perfect time to make one and share the DIY with you all.

I didn’t just use a 2x4 to create this wooden flag. I also used a scrap piece of 2x6 that we have loads of leftover from a bunkbed project we made for our four daughters. And when I say we I really mean that my husband made because I pretty much just stood there and handed him things as he needed them.

If you don’t have all the tools to make this project happen grab your DIY CRAFT KIT HERE

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Be sure to check out a few of my other 4th of July patriotic themed projects: RAG WREATH, LEANING PORCH SIGN, and this HANGING WOOD FLAG

MAKE YOUR OWN RUSTIC WOOD AMERICAN FLAG

Here’s what you’ll need

• 2x4x5.5

• 2x6x5

• red, white, and blue acrylic paint

• paint brushes

• sand paper

• masking tape

• 1.4” wide star cutout

• pencil

Helpful tools

• Cricut cutting machine

• Cricut Design Space

• Cricut cutting mat

• Ryobi miter saw

• Ryobi sander

ONE- If you didn’t grab a DIY craft kit the first thing you want to do is cut your wood pieces. Use your miter saw to cut the 2x4 to 5.5” and the 2x6 to 5”. You will place the 2x6 on it’s side so that it stands 5.5” tall. Use your sander to give them a quick sanding. I use a cordless Ryobi sander and really love it! Then wipe all the sawdust off with a lint free cloth.

TWO- Paint the 2x4 completely blue. You will have to wait for the front to dry before you can start painting the back. Since this is a dark color one coat should be enough but you can paint a second coat if you aren’t happy with the coverage.

THREE- Paint the 2x6 completely white. Wait for the front to dry before you paint the back. After all sides have dried you’ll want to paint a second coat of white paint to get a good coverage. Let dry.

FOUR- Take your cardstock star cutout and trace around it with a pencil in three places on the front side. I staggered mine because I like that look but you can place yours wherever you’d like. Try to trace lightly so that it’s easier to paint over. Using a small paint brush paint inside the star outline. A thin layer works best so you don’t have streaking. Paint a second layer once that layer is dry.

FIVE- After your white block is totally dry you can start painting on your stripes. To get even stripes you want to use masking tape. Be sure your block is standing at 5.5” tall before you start applying your tape. If you are using .75” masking tape you will want to start at the top and apply a piece of tape all the way around but apply your tape so that it hangs off the top slightly. This way you aren’t left with a super thin stripe on the bottom. This first piece of tape is called your spacer piece.

Then take another piece of tape and apply it directly below your spacer piece. Remove your spacer piece and then apply it directly below that second piece of tape. You will do this the whole way down your 2x6. This is what it should look like when you’re done.

SIX- This step isn’t 100% necessary but it does help with reducing paint bleed. Take your white paint brush and paint a super thin layer of paint where the tape and the wood meet, the seam. Let dry.

SEVEN- Where the wood is exposed paint that red. Let dry then paint a second coat. While the paint is still wet peel up all the tape. Let dry.

EIGHT- After your blocks are dry you’ll want to distress them. Take a piece of sandpaper, or your orbit sander, and distress both blocks. You want to focus on the edges and then lightly go over the front, back, and sides. When you’re finished distressing you want to wipe the dust off with a lint free cloth.

Enjoy your new American flag décor! Like with all of my DIY projects if you have any questions please feel free to ask.

DIY mini Easter wooden tags

MAKE YOUR OWN RUSTIC WOOD TAGS FOR EASTER

DIY mini wood tags for Easter. How to use your Cricut to make wood signs for Easter. Make your own farmhouse tray mini signs for spring.

I can’t believe how popular these little wood tags for Easter are! I keep selling out of this spring DIY craft kit almost daily. Since the entire country is basically on lockdown this kit is giving people a much needed creative outlet. I am SO happy to be able to provide this joy to so many around our nation, especially at a time like this.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

In this crafty tutorial I’m going to show you how to stencil these wood tags for Easter. If you’re wanting a tutorial on how to cut wood tags you’ll want to go here. I share the measurements, angles, and even the drill bit size to make the twine hole in the middle.

DIY RUSTIC WOOD TAGS FOR EASTER

Here’s what you’ll need

• mini wood tags (you can buy these precut tags if you don’t have the tools to cut them yourself)

• stencil material

• transfer tape

• acrylic paints - gray, pink, yellow, blue, white

• sandpaper

• paint brush

• stenciling sponge

• twine

• masking tape

• vinyl squeegee

• CRICUT SVG for hangin’ with my peeps —> CLICK HERE

• free SVG for bunny image & happy Easter —-> CLICK HERE

Other helpful tools I used

• Ryobi miter saw

• Ryobi sander

• Cricut Explore (you can create AMAZING projects with an older model Cricut like this)

• Cricut Access

• Cricut cutting mat

If you love these rustic wood spring tags be sure to check out this super easy Dollar Tree moss bunny craft.

Cutting your wood pieces

1. First you want to cut out your wood tags. I used my Ryobi miter saw to do this. Cut a 1x4 in to 3 5” long pieces. On the top of each 5” piece measure in 1” and make a mark. Set your miter saw to 45 degrees, line it up with your 1” mark and cut. Flip your tag over and do the same to the other side. 

2. Now drill a hole in the middle of the top of each piece. This is for your twine holder to go through.

3. After you have that done give each piece a quick sanding. You don’t have to get crazy with this, it’s not a fine piece of furniture. I use 120 grit sandpaper for this and that’s it. Just enough to take off that shine it has when you get it from the lumberyard.

   WATCH THE VIDEO OF HOW I MADE THESE USING MY MITER SAW

Stencils

You can use any cutting machine to create your Easter themed stencils. I use my Cricut Explore to make all of mine. If you have and are using a Cricut you can get the HANGIN’ WITH MY PEEPS image to use here. You can use my FREE SVG’s for the bunny image & happy Easter cutting files here. I use Oramask stenciling film to make my stencils. While it is a little more expensive than other materials I have found it works the absolute best for stenciling.

Painting (the fun part!)

First a thin layer of gray paint on each wood tag. Be sure it is a thin layer, you will still be able to see the wood grain through the paint. After the first thin layer is dry you can paint a second thin layer. You don’t want more than two layers of base paint on your wooden tags, or any painted wood sign. Too much paint will cause issues when stenciling with base paint peel up, which can be impossible to fix sometimes and honestly it just plain sucks to have to go back and fix.

2. After your base paint is completely dry you can apply your stencils to all three wood blanks. Apply your transfer tape to your stencils (if you bought my DIY CRAFT KIT this step has already been done for you). Peel the paper backing from your stencil/transfer tape. Go slow.  Place your stencils sticky side down on the front of your painted wood tag. The front is just whichever side you prefer best ;). Using your vinyl squeegee, if you don’t have one you can use a plastic store rewards card, and rub the stencil to that it adheres to the wood. Slowly peel the transfer tape away from the wood leaving your stencil attached to the wood. I find that it works best when I roll the transfer tape away, check out this DIY PAINTED WOOD SIGN TUTORIAL for  a closer look at how to do this.

3. Use masking tape to tape off the edges of your stencil so you don’t get paint on areas of the wood tags that you don’t want paint on.

4. Using one end of one of the sponges dip it in the white paint. You need very little paint, the more paint you use the more paint bleed you will likely have. Dab your sponge onto the exposed areas of your stencil. The coverage should be VERY faint. Let that dry and repeat up to three times. You don’t want to apply more than three coats as this could cause issues with paint peel up where you just stenciled. If you want the cute little bunnies to be different colors paint them white first then finish them with two layers of your preferred paint color. I painted mine in pink, blue, and yellow. Giving them a white base first will allow the colors to really pop if you are painting on a dark base.

5. Peel up your stencils and tape. Using an xacto knife helps to remove the middle piece of the stencils.

Distressing

After your paint completely dries from stenciling you can start distressing your wood Easter tags. I LOVE this technique because it’s super easy and quick. Using sand paper or your sander give a quick sanding to the edges, corners, and lightly on the front of each wooden tag. Wipe off and dust.

Adding twine

Probably the easiest step is adding the twine. Decide how long you would like your twine hangers to be. I think I measured mine at 12” or so. You’ll need 3 pieces, one for each wood tag. Feed one piece of twine through the hole in one of the wood tags then tie it in a knot.

You’re ready to display your Easter wood tags in your home. I know it may seem like a lot of steps written out but really these are super easy and quick to DIY once you get going on them.

Like with all of my DIY tutorials if you have any questions please reach out. Leave a comment below or send me a message on one of my social media pages. You can find my links at the top.

Happy Crafting!

DIY painted wood funny cactus signs

DIY PAINTED MINI CACTUS WOOD SIGNS

I don’t know about you but my family has a good sense of humor. So, naturally these signs were a hit around our house! How can you not laugh at a painted wood sign that reads “don’t be a prick” with a picture of a cactus?! Or “free hugs” lol!!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind

They were such a hit that I added them to my online shop, funny painted cactus signs. If you don’t have time to DIY this hilarious set of 3 mini wooden signs you can buy a premade set here —-> I NEED FUNNY CACTUS SIGNS.

If you plan to hang your newly painted wood signs check out this quick and easy tutorial for attaching sawtooth hangers to signs

If you purchase the DIY craft kit from my handmade online shop here’s what’s inlcuded

• 3 precut, lightly sanded, stained, distressed wood 5.5”x5.5” wood bases

• 3 stencils with transfer tape applied - go sit on a cactus, don’t be a prick, free hugs

• 1 sponge brush

• 1 stenciling sponge

• white & black acrylic paints

• printed instructions

---

If you are struggling with your sign painting adventure I would LOVE to teach you all in-depth steps I use in my own business. when I first started out I had issues with paint bleed, paint peeling up, sticky residue getting left behind but by doing a TON of trail and error, and thousands of hand painted signs later I have perfected my sign painting skills and want to teach you all the things I didn’t when I first started out.

---

If you didn’t snag up a DIY CRAFT KIT here’s what you’ll need

• precut wood blocks, 5.5”x5.5”, stained dried and sanded

• stencils, don’t be a prick, free hugs, go sit on a cactus

• transfer tape

• white acrylic paint

• black acrylic paint

• paint brush

• stenciling sponge

Helpful tools I used to make my set

• Cricut explore

• Cricut design space

• Cricut access

• Cricut cutting mat

• xacto knife

• vinyl squeegee

• RYOBI miter saw

• RYOBI orbit sander

• 120 grit sandpaper

If you’re starting from scratch you’ll want to cut, sand, and stain your wood pieces at least 24 hrs prior to painting them, if you are going to be staining them first. Stain needs to fully dry before painting any project.

Once your wood pieces are dry you can start painting them. Start with a DRY brush and using a little bit of paint at a time, apply a THIN layer of paint to one side of your board. Leave a small border all the way around each wood base. I don’t measure this, just eyeball it. This will give you that rustic uneven look. Do this with each wooden base. You do not need to paint any of the other sides, just one side per base.

After your fist THIN coat is totally dry you can apply the second coat, be sure to apply using the same technique as you did with the first coat.

Once they are all TOTALLY DRY you are ready for stenciling. They must be completely dry otherwise your stencil will not stick to the wood and it will be an ugly mess.

Start by removing the paper backing from your stencil. This works best if you use a vinyl applicator, or you can use a stiff store rewards card,  I don’t recommend using your bank card as it could break during the process.

Rub the front of the stencil

Flip it over and do the same on the back

Now slowly peel the paper backing away from the stencil. This works best if you start at one corner and peel away at a sharp 90 degree angle. Go SLOW.

First, you’ll want to place your stencil where you want it on your board. I wanted mine to all be centered so that’s what I did but you can place them anywhere on the board you’d like. I just recommend keeping the image within the painted part of the wood.

Using your vinyl tool rub the stencil, using the same technique as before. Now SLOWLY peel the transfer tape {the clear sticky stuff} away from your stencil. I do this at a sharp angle and I will slowly roll it off of the stencil.

After you get the transfer tape off rub your finger along all the exposed stencil edges {anywhere there is wood showing thru}. this helps to get a good seal on your stencil.

To help prevent paint bleed you can take the white paint, the base color, and lightly go over the exposed areas of your stencil. This will help to fill in tiny air bubbles that you may have missed in the previous step. You want this to be a very LIGHT LAYER of paint, you barely want to see it on your stencil.

Use one end of your cosmetic sponge LIGHTLY dip it in the black paint. BE SURE TO USE VERY LITTLE PAINT, this is key to getting little to no paint bleed under your stencil. Dab the sponge on a paper towel a couple times then onto your stencil, do this till you have a very THIN even coat {you should be able to see thru the first coat}. LET DRY, repeat till you are happy with the coverage.

Now peel up your stencil. I use an xacto knife to get up all the little pieces. If you don’t have one of these a sewing pin/needle works great for this as well. If you have any paint bleed just go over those with a small paint brush and your background color.

Please feel free to message me if you have any questions once your kit arrives. I want your DIY projects to turn out AMAZING and will help you in any way I can to make that happen. If you ordered from the website shoot me an email BUT if you ordered from my ETSY shop please message me on there. In order to keep in compliance with Etsy all convos must be kept on their platform

DIY stenciled rustic fall signs

DIY painted fall signs. How to make your own farmhouse style signs for your fall themed decor. These painted tiny signs are so perfect for coffee bars, tiered trays and mantles. This trio of hello fall, give thanks, and a pumpkin are hand painted in orange, black and white, the classic fall colors. This tutorial will take you step by step on how to make your own stenciled wooden signs at home.

Don’t you just love painted mini signs?! HELLO FALL, GIVE THANKS, and a picture of a PUMPKIN just scream I LOVE FALL! I placed mine on a rustic old window frame that has candy corn burlap draped across it and OMG it looks adorable! These mini signs are also perfect for tiered trays and coffee bars. How cute would these be paired with some wood bead garland painted in fall colors?

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

If you plan to hang these mini fall wood signs be sure to check out my post on how to quickly and easily attach a sawtooth hanger to wooden signs.

How to make painted wood signs for fall

Here’s what you’ll need

• 3 prestained 5.5”x5.5” wood blanks

• hello fall, give thanks, pumpkin image SVG files

• oramask stencil film

• transfer tape

• paint brushes

• stenciling sponge

• orange, white, and black acrylic paint

• vinyl squeegee

• sandpaper

• xacto knife

Helpful tools

• Cricut cutting machine

• Cricut green mat

• Cricut Design Space

• Ryobi miter saw

• Ryobi sander

If you don’t have all the tools to completely make this fall craft from scratch you can order a DIY craft kit here. It comes with everything you need to make these wood signs at home.

ONE- the first thing you need to do is cut your wood into squares. I used a 1”x6” piece of pine, the actual size is 5.5” so I cut them into 5.5'“x5.5” squares. After you’ve cut and sanded your 5.5”x5.5” wood pieces stain them and let them dry for 24 hours. After they’ve dried sand around the edges, corners, and a light sanding on the front, be sure to wipe them down so you get all of the sawdust off of them. I LOVE my RYOBI CORDLESS SANDER , it is what I use for all of my wooden projects. But, if you don’t have a sander you can get the job done with 120 grit sand paper.

TWO- Cut your stencils out. If you want to use an SVG similar the ones in this tutorial you can go here to grab your SVG files. I’ve found that using true stencil film works best for stenciling wood signs. I highly recommend cutting the designs out on Oramask stencil film. I used a Cricut Explore to cut the files for this fall craft. I weeded them with an xacto knife once they were done cutting.

THREE- Now you can start painting! You want to paint each sign a different color. Start by painting a thin layer of paint on the front of each sign. You want to leave a small border around the edge. This should look kinda rough and uneven, it will give it lots of character when finished this way. Wait for the first layer to dry completely then paint a second THIN layer on top of that. I don’t recommend painting more than two layers of base paint. the more layers you have the more problems you will run into when peeling up your stencil.

Repeat this step for all 3 signs. Once they are all TOTALLY DRY you are ready for stenciling. They must be completely dry otherwise your stencil will not stick to the wood and it will be an ugly mess.

I don’t have pictures of how to do the next steps on the fall mini signs BUT I am sharing pictures of a similar craft that I made for winter themed signs. You can read the full winter themed tutorial here. Both sign trios have the same steps, the only differences are the stencils and paint colors, everything else is the same :)!

FOUR- Start by removing the paper backing from your stencil. This works best if you use a vinyl applicator {here’s what I use} or you can use a stiff store rewards card, I don’t recommend using your bank card as it could break during the process.

If you’re using your own stencils you’ll need transfer tape to transfer your stencil onto the wood in one piece.

Start by rubbing the front of the stencil with your vinyl applicator. Be sure you move in one direction.

Then flip it over and do the same to the back.

Now slowly peel the paper backing away from the stencil. This works best if you start at one corner and peel away at a sharp 90 degree angle. Go SLOW.

Before you start applying your stencils decided which stencil you will put on each board.

First, you’ll want to place your stencil where you want it on your board. I wanted mine to all be centered so that’s what I did but you can place them anywhere on the board you’d like. I just recommend keeping the image within the painted part of the wood.

Using your vinyl tool rub the stencil, using the same technique as before. Now SLOWLY peel the transfer tape {the clear sticky stuff} away from your stencil. I do this at a sharp angle and I will slowly roll it off of the stencil.

After you get the transfer tape off rub your finger along all the exposed stencil edges {anywhere there is wood showing thru}. this helps to get s good seal on your stencil.

FIVE- Now you’re ready to start painting your stencil! Use one end of your cosmetic sponge LIGHTLY dip it in the paint color you’d like your design. BE SURE TO USE VERY LITTLE PAINT, this is key to getting little to no paint bleed under your stencil. Dab the sponge on a paper towel a couple times then onto your stencil, do this till you have a very THIN even coat {you should be able to see thru the first coat}. LET DRY, repeat till you are happy with the coverage.

SIX- After you’re finished sponging the stencil you can peel it up immediately. I know all tutorials can vary with peeling the stencil up while the paint is still wet or waiting for it to dry. I have had the best luck peeling the stencil while the paint is still wet. Use an xacto knife or sewing pin to aid in this step.

As with all of my DIY tutorials if you have any questions please ask in the comments below:)

DIY wedding guestbook alternative

Oh how I wish I had something gorgeous like this when my husband and I married almost 11 years ago. Back in those days, ha I say that like it was so long ago, but truthfully back then personalized wedding décor was not an affordable option. Our young selves scrimped together $2k for our wedding, that included the dress, the rings, and all the food, so buying a fancy sign like the ones I make for other newlyweds today was not in our wedding budget.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

But despite our small budget our wedding was beautiful. We got married on my father-in-law’s property in the fall, back before outdoor rustic weddings were a thing. I always knew I wanted to marry my husband outside surrounded by nature and God. Something about that just sings happiness. And that’s exactly what it was <3!

I know some brides are like me, and are on a little tighter budget so saving here and there really adds up. That’s why I wanted to offer this DIY PAINTED WOOD WEDDING TREE SIGN KIT. It’s an affordable option to the ones we paint for you. Instead of us making them we send you everything so you can save a little money and DIY your own.

How to paint your own wood wedding tree sign

DIY PREMIUM KIT includes everything you need to make your own sign but you can opt for other kit styles to include just the stencil or just the stencil and board.

• prestained board

• personalized stencil on professional quality stencil film with transfer tape attached

• white paint

• stenciling sponge

Helpful tools not included

• xacto knife

• vinyl squeegee

• 3/4” masking tape

If you just need the stencil we can accommodate that too. But to make it super easy for you we recommend opting for the kit that includes the prestained board. If you don’t allow enough time for your stained board to dry prior to stenciling you can run into a lot of problems :/.

---

Want to learn how to paint signs like a professional? Join my SIGN PAINTING ECOURSE where I teach you everything I know about sign painting. Painting thousands of signs over the last couple of years for my online business I’ve had to teach myself A LOT and boy do I wish I had a course like this when I started out. I would have saved so much time, energy and so much money!

---

If you don’t need a DIY craft kit and have all the tools to make your own stencils/prep your own board here’s what you’ll need

• 11.5”x14.5” stencil, cut and weeded {you want it slightly larger than your board so that your wedding tree will hang off of your piece of wood]

• transfer tape

• 11.25”x14” sanded and pre-stained. You want to wait a full 24 hours before painting on stained wood. You will have a very difficult time getting the stencil to stick if the wood is not full dry.

• white acrylic paint

• stenciling sponge

Painting your own wedding guestbook alternative

Your stencil will come with three pieces

• white paper backing

• blue stencil film

• clear transfer tape {this is what will enable you to easily transfer your stencil to the board in one piece without any issues, do not remove this till after the stencil is applied to your board}

Using either a vinyl squeegee {here is the exact vinyl squeegee I use for my sign painting business} or a rewards card rub the front and back of your stencil. This will help the stencil adhere even more to the transfer tape and for the paper backing to release a little easier when you remove it.

Flip your stencil over so that the paper backing is facing up and peel the backing away from the stencil, leaving the stencil attached to the transfer tape.

PRO TIP: rolling it away works best. You don’t want to pull it up, this will cause the stencil to tear. Instead roll it off. If you have little pieces that stick just push them back down and keep rolling the paper away {see the video above for a visual of how to easily remove the paper stencil backing}

After you’ve removed the paper back from your wedding tree stencil you can discard the paper, you won’t need it again. Flip your stencil over so it’s sticky side is on the wood. Align the bottom and left sides of your stencil with the bottom and left sides of your wood base. Then pull the stencil to the left so it overhangs on the wood base, this will make it so that your tree branches are hanging off the sign and you won’t have a weird edge where the tree branches just suddenly stop.

Starting from the middle and working your way out press your stencil to your board using your vinyl squeegee or rewards card. You want to apply a fair amount of pressure for this step so that you work out the air bubbles. The less air bubbles the less paint bleed you’ll have.

Then remove the transfer tape the same way you removed the paper backing. Start from one corner and work your way to the opposite corner.

PRO TIP: GO SLOW! If you do this step too quickly you will likely tear your stencil and you definitely don’t want that to happen.

Give your board a once over to make sure there aren’t any air bubbles or areas that need to be flattened. Use your squeegee if you need to take care of those spots.

To paint your wedding tree board you will need to use the FLAT end of your stenciling sponge. To keep the paint bleed at a super minimum you are going to paint 3 SUPER LIGHT layers.

Dip the end of your stenciling sponge into your paint. If you ordered the PREMIUM WEDDING GUESTBOOK DIY CRAFT KIT you will have a lot more paint than you will actually need. You will literally use a TINY amount of paint on your sign but I always send more than enough paint for our DIY CRAFT KITS.

Dab off the excess paint, you don’t want there to be any globs on there. Then dab the paint onto the areas that need to be stenciled. Try to get an even coat.

You want to be able to see the wood grain still through the first couple of layers of paint. Here’s what mine looked like on the lettering after the first coat.

After the first layer is dry you can apply a second layer, using the same technique. It will be super tempting to apply a heavier amount of paint but you definitely do NOT want to do this. All that extra paint will seep under your stencil and it will just be a big ugly mess and you’ll cry. ugly cry at that.

This is what my wedding guestbook looked like after the second layer. It obviously needs another coat. Just keep applying coats until you are happy with the coverage. You can apply up to 4 thin coats.

PRO TIP: the coverage will actually be darker than it appears while the stencil is still on the wood base.

After you’re satisfied with the coverage you need to peel up the stencil. PEEL IT UP WHILE THE PAINT IS STILL WET. I know other tutorials suggest to peel after the paint dries but in my professional opinion dry peeling does not give good results. I have painted THOUSANDS of signs over the last couple of years and had LOTS of trial and error in this department ——> if you want to take your sign painting journey even further check out my SIGN PAINTING ECOURSE

Remove the taped off areas then to peel the stencil start from one corner and peel at a sharp angle, do not peel in the up direction rather in the pull toward you direction.

Use and xacto knife to get up and under the stencil film. Do not force it under as this will gouge your board.

After you’ve removed all of the stencil film your sign needs to cure for about 24 hours before using it. You can spray your sign with either a matte or satin finish but this is not necessary. Here’s the one I use for my signs, satin finishing spray.

My customers have had great luck with the SHARPIE EXTRA FINE POINT MARKERS to have their guests write on their boards the day of the wedding.

Please let me know if you have any questions on how to paint your wedding guestbook alternative. If you want to take your sign painting journey even further you can’t miss my sign painting E-course. I spent endless amounts money {seriously more than I’d like to admit}, wasted a ridiculous amount of time and energy to find the exact way to easily and efficiently paint wood signs for my sign painting business. I don’t want you to have the same stress. I wish I stumbled across a course like this when I was starting out. Someone to tell me and SHOW me exactly what to do {bc let’s be honest some tutorials are just WAY off on their DIY sign painting}. And not only that but tell me EXACTLY what to buy. I could have been making a HUGE profit a lot sooner if I didn’t have to go through all the trial and error.

Save yourself the headache learn the RIGHT WAY to create professional one of a kind signs.

DIY CRAFT KIT how to paint your free standing BOO wood cutouts

How to paint your DIY CRAFT KIT, BOO WOOD CUTOUTS

I just love these little wood cutouts. They are so adorable and tie in perfectly with our simple Halloween décor. I primarily decorate for fall but I do like to add touches of Halloween to our decorations because I have little kiddos and they LOVE the Halloween stuff far more than the traditional fall décor. So we compromise and get the best of both worlds.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

If you love this DIY CRAFT KIT check out another popular fall craft kit, DIY FREE STANDING PUMPKINS

Don’t feel like reading the tutorial? No worries I have a short video tutorial on my YouTube channel. Scroll to the bottom to catch it or click here to view the HOW TO PAINT YOUR CRAFT KIT, DIY BOO WOOD CUTOUTS

If you need a CRAFT KIT you can order yours here —-> DIY CRAFT KIT BOO WOOD CUTOUTS FOR HALLOWEEN

If you want to make yours from scratch check out this post on how to make your own BOO WOOD CUTOUTS using a Cricut cutting machine and a Ryobi scroll saw. I show you exactly how I make my BOO cutout sets and if you have the tools you can make your own too! There’s even a video tutorial at the end ;)!

How to paint your BOO wood cutouts

If you didn’t but the DIY CRAFT KIT here’s what you’ll need

• WOOD CUTOUTS

• MIDDLE CUTOUT PIECES

• PAINT BRUSHES OR FOAM BRUSHES

• BLACK ACRYLIC PAINT

• WHITE ACRYLIC PAINT

• PENCIL

---

Real quick…if you have ever wanted to learn how to paint wood signs, the way the PROs do, you don’t want to miss my complete guide to sign painting. It is a whole course that you complete on your time. I am teaching you EVERYTHING I know without you having to go through the headache and expense of trial and error. If you’ve struggled with paint bleed, designs not lining up, paint peel up, sticky residue left behind you are in for a treat! Click on the image below or go here for more info.

---

First you want to decide if you want to paint white or black letters. Heck, you could even mix it up and do both! I chose to do white ghosts but I wanted black distressing on my cutouts. There are lots of different ways to achieve this look but my favorite is to paint the distressing color first then paint my project whatever color I want it to actually be.

So on these BOO cutouts I first painted them with a SUPER thin layer of black paint {remember this is going to be the underneath/distressed color}.

After the underneath color is dry you can paint your wood cutouts the actual color you want them to be.

Some important things to know:

• use a VERY LIGHT hand when painting the top color. You do not want to press hard as this will put too much paint on your wood cutouts and it is far easier to add more paint than it is to take too much paint off.

• do NOT get your brush wet. For almost all of my paint projects I always use a DRY brush.

• use very little paint, dab off excess paint before applying

• work from the middle out

• paint lightly around the edges as this is where the “natural” wear would be

• if you need a little more coverage wait till your paint is dry then add more paint

Paint all sides of each cutout this way.

Trace around your cardstock cutouts. You will have a total of 5 - 2 cutouts for the letter B and 3 cutouts for the ghosts {you will reuse the ghost cutouts for both ghosts}. Place them where they need to go on your cutouts then trace around them with a pencil. This does not have to be perfect ;)!

Using a fine paintbrush paint inside the traced lines with the same colored paint you used for your distressing color. I used black for my distressing color so I also used black for areas I traced around.

And then you’re done! If you have sandpaper on hand you can lightly give it a little more distressing but that is totally up to you.

Click here to shop even more DIY CRAFT KITS

Check out the full video tutorial

If you have any questions about your DIY CRAFT KIT please leave a comment below or feel free to send me a message. If you purchased through my Etsy shop please message via their platform to stay in compliance with Etsy’s policy.

DIY free standing BOO cutouts using your Cricut & scroll saw

DIY- use your CRICUT to make BOO wood cutouts for Halloween

I don’t have the latest fancy Cricut Maker, but that doesn’t mean I still can’t create AMAZING projects with my older model, CRICUT EXPLORE. Especially when use it with my Ryobi scroll saw…pure magic happens! Ok, obviously not real magic but the projects you can create with this combo is everything to write home about!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I wanted to add another DIY craft kit to my crafty line up for my online business and thought these BOO cutouts would fit in perfectly with the craft kits I already offer.

If you don’t have the tools to make your own BOO cutouts grab your own

—-> BOO DIY CRAFT KIT <——

After you read this tutorial check out how I finished my own BOO WOOD CUTOUTS

Here’s what you’ll need to cut out your own Halloween BOO wood letters

• CRICUT EXPLORE AIR

• CRICUT CUTTING MAT

• CRICUT ACCESS in CRICUT DESIGN SPACE

• RYOBI SCROLL SAW

• RYOBI SANDER

• RYOBI MITER SAW

• 120 GRIT SANDPAPER

• PINE WOOD {I used a scrap piece}

• PENCIL

• CARDSTOCK

Don’t feel like reading the tutorial? Catch the video below or click here for the DIY BOO cutouts tutorial using your Cricut & scroll saw

---

Join the crafty community. Get exclusive offers, content, and more

---

First, design your BOO in Cricut Design Space. I used the font beefcake for the letter “B”. I used a ghost image in DS {design space} that is included in my Cricut Access monthly subscription plan. It had arms but I took those away using the slice function. I resized them too fit the piece of wood I was using so mine are 6”x3.25”.

Next, cut them out on cardstock. I used some scrap cardstock that I had leftover from a previous DIY project. After I started cutting them I realized that I really didn’t need to cut out two ghosts. So really you just need 1 letter B and 1 ghost. Don’t toss the middles of the ghost or B, you’ll need those for later when you paint them.

Now trace around your cutouts using a pencil onto your wood. I have TONS of scrap wood so I used a scrap piece that I had on hand. I used a 1” pine board that you can find at most home improvement stores. Check out the DIY SCRAP WOOD PUMPKINS I made using this same method. They turned out SO CUTE!!

You don’t need to trace around the middle cutouts because we won’t be cutting those pieces out. Remember to trace around your ghost twice ;)

After you have your Cricut cutouts traced it’s time to cut them out using your Ryobi scroll saw. If you don’t have a scroll saw you can use a band saw and maybe even a jigsaw but I’ve had great luck with cutting things out on my scroll saw so for now that’s what I’m sticking with.

Once you have them all cut out you’ll want them to be able to stand on their own. I used my miter saw to do this. My miter has a laser on it making it SUPER easy to line things up and to show me exactly how much I’m taking off. By cutting a sliver off the bottom with your miter saw you get a nice straight base so your projects are able to stand freely on their own.

SIDE NOTE: if you’re thinking about investing in a set of your own power tools you’ll want to read this WHAT ARE THE BEST POWER TOOLS FOR CRAFTERS. It wasn’t that long ago when I had some serious anxiety about using power tools so I wrote a little about that and why I’ve chosen the tools I have for my crafty projects and business.

Then just give them a quick sanding and you’re ready to paint them. I always use a 120 grit sandpaper and most of the time I don’t sand my projects to a super smooth finish. A little bit of bumps and divots just add to the rustic look ;)!!

There are so many projects you can do when you start pairing your tools together. Like this DIY MERMAID CUPCAKE STAND I made for my daughter’s birthday party this year. And a bonus is that she has a pretty awesome new room decoration she was able to decoration then hang in her bedroom after the party was over.

Check out the DIY BOO cutouts using your Cricut & scroll saw video tutorial below

COMING SOON…a complete guide to paint wood signs without the stress and headache of trial and error. Click here for more info

DIY embroidery hoop winter wall hanging

How to make an EMBROIDERY HOOP wall hanging for winter

Embroidery hoops are such a versatile craft tool. You can use them for the obvious of embroidery OR you can use them for so many other projects. Like a nursery mobile, a hoop to hold your screen for faux screen printing, or this fun winter wall hanging that you’re reading.

If you love the little pinecone accents check out this EASY PINECONE DOOR HANGER. And if you have little ones you HAVE to try this EASY & MESS FREE PINECONE ART! My older girls had SO much fun making their own pinecone paintings.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Don’t have access to the right tools or just don’t have time to gather the supplies? No problem:)! I’ve put together this super easy craft kit just for times like this! Click I NEED A CRAFT KIT below to order yours from my Etsy shop.

Don’t need a craft kit? Here’s what you’ll need

• 9.25”x9.25” wood base

• sticks

• 6” embroidery hoop

• rustic bells

• assorted accents

• paint brush

• white acrylic paint

• twine

• floral wire

• Rustoleum KONA stain

• Ryobi sander {or 120 grit sandpaper}

Skip to the bottom to catch the full video tutorial

---

First you need to stain your wood base and your hoop. I recommend using a quick dry stain. Let dry

Next, after your wood base is dry you want to distress it. I used my Ryobi sander for this step but you can use a piece of 120 grit sandpaper. Focus on the edges and corners and lightly sand the sides and front

Now paint your sticks completely white and the outer edges of your pine cones white. Use a dabbing motion when painting the pinecones.

Measure out how long you would like your bells to hang down then add a couple of inches. I made my bells to hang at staggering lengths.

Feed one end of the twin into the hanging part of the bell and tie it off. Repeat this step for all three.

After your stick are dry gather them together and wrap the green floral wire around the center. This will help to keep them together while you are placing the accents on. Then place your accent pieces on top of the sticks and wrap the middle section of the sticks and accents with twine.

Now glue down your embroidery hoop to your wood base. Apply glue to back side of the hoop {whichever side you prefer} then place it on your wood base and press down firmly.

Tie your bells around the metal part on the top section of the embroidery hoop. Pull this very tight. Add a dab of hot glue to the knot and pull it tight again.

Use your glue gun to glue down your accents. To get a secure hold, hold the accents in place till the hot glue is completely dry.

Trim down the pieces of twine from where you tied them onto the embroidery hoop and the you are done!

Check out the full video tutorial below

DIY CRAFT KIT how to paint your standing wood pumpkin cutouts

DIY how to paint your free standing wood pumpkin cut outs

I’m LOVING these little wood pumpkin cutouts! Seriously, what’s not to love?! The polk-a-dots? The stripes? The raffia? Yup! I love everything about these handmade pumpkins. And I know yours will turn out just as adorable as these guys.

If you haven’t ordered your DIY PUMPKIN CUTOUT CRAFT KIT be sure to grab yours so you can get started on your fall décor.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

CHOOSE YOUR CRAFT KIT

BASIC KIT:
3 wood cutouts

PREMIUM KIT:
3 wood cutouts
2 oz orange acrylic paint
2 oz white acrylic paint
2 foam brushes
1 round foam brush
raffia
sandpaper

Please feel free to message me if you have any questions once your kit arrives. I want your DIY projects to turn out AMAZING and will help you in any way I can to make that happen. If you order from the website shoot me an email BUT if you ordered from my handmade ETSY shop please message me on there. In order to keep in compliance with Etsy all convos must be kept on their platform.

If you want to skip the written tutorial and get right to the video tutorial shoot to the bottom of this page and you’ll find my youtube thumbnail for the DIY wood pumpkin cutout craft tutorial.

Don’t want/need a whole craft kit? Here’s what you’ll need

• 3 wood pumpkin blank cutouts

• orange acrylic paint

• white acrylic paint

• paint brushes

• round sponge brush

• chip brush

• antiquing wax

• sandpaper

• raffia

• wide painter’s tape

First you want to paint your wood pumpkin bases. I chose to paint the tallest and shortest pumpkins orange and the medium sized pumpkin white. Paint a THIN layer on all sides of each pumpkin. Once the fronts are dry you can paint a second THIN layer to get more coverage.

Next, after your base coat is completely dry, using your round sponge brush make polk a dots on your pumpkins. If using the same round brush to make the different colored dots do NOT rinse. You don’t want all that water in your foam round brush. Just dab it off onto a paper towel until all the paint is gone then you can use it in the second color.

TIP: to avoid a messy blog don’t push your round brush all the way down onto your wood pumpkin. Instead, lightly dab, even using a slight twisting motion works MUCH better to achieve a non-blobby polk a dot ;)!

Now for the striped pumpkin. I used wide painter’s tape to achieve this look. Tape off the bottom, lining it up with the bottom of the pumpkin { you can get out a ruler if you want this to be exact but honestly just eye balling it works great too}. Then I placed a piece close to the top, but not all the way at the top. I wanted a little of the stem to be white. Then I place another piece in between those two pieces.

Paint the areas that are not taped off. Paint two THIN layers, allowing them to dry in between coats.

TIP: to avoid paint bleed brush with the tape not into the tape.

Let all three pumpkins dry. Now’s a perfect time for a glass of wine!

After they are dry you can start distressing them. A good rule to remember when distressing is that you want to distress where things would naturally be worn. Around edges, corners, and lightly on the fronts. Use your sand paper and distress along the edges and lightly pass it along the front {I also lightly distress the back to keep the look cohesive}. Wipe the sawdust off with a lint free cloth.

Applying the antiquing wax really gives these little guys life! Take your chip brush and lightly dip just the tip of it into the wax, then brush off most of it onto a paper towel. You do this so you do not end up with way too much wax on your project. It is far easier to apply more than it is to remove it from your project. You want to apply the wax the same way you sanded your pumpkins. Focus on the edges and lightly brush on the front/back.

TIP: trimming down your chip brush will give you better control over the bristles and will prevent them from making your wax so wispy when you apply it to your pumpkins.

Tie a couple stands of raffia around the stems and you’re done! Trim the ends if needed. Since raffia tends to come in long strands you’ll want to cut the strands in half, and even in thirds in some cases. Then tie in a bow around the wood stem.

And you’re done! If you loved this tutorial please let me know in the comments. If you’re on social media don’t forget to follow me there FACEBOOK, INSTAGRAM, PINTEREST, YOUTUBE

Pin the image below for later ;)

Watch the full video tutorial below

Check out my other crafty fall tutorials

Ultimate Dollar Tree birthday gift idea

The best kid’s birthday gift idea when you’re on a budget

It’s no secret that my girls and I LOVE the dollar tree. Seriously, we were just there today and when we got home my oldest couldn’t believe that we spent and entire HOUR in there and it literally felt like only 20 minutes had past lol! Yep…raising those girls right!

Our sole purpose of the trip was to find a couple gifts for the oldest daughter’s friends for their birthday parties. Raising a family of 6 isn’t a cheap task. So, things like friend’s birthday parties typically have a pretty small budget of $10 per kiddo. At Walmart $10 doesn’t get you much from the toy aisle or any aisle that a kid would be interested in anyway. But, I have to say over the years we have gotten really good at whipping up some amazing birthday gifts on the $10 budget. And I can’t wait to share the latest gift that comes in WAY under budget! Under budget meaning 70% lower than what we typically budget for friend’s birthdays.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

How was I able to create two gifts for kids for under $6?

Well, first the Dollar Tree. It is FULL of really amazing things that on their own may not be all that amazing but when paired with something else, like let’s say a personalized wood letter cut out, can be one of the best gifts ever! And second, I just purchased a scroll saw last weekend with the money that comes in from my handmade business so I used that to create the customized gifts for her friends.

My only regret is not buying a scroll saw sooner. If you’re curious about the one I purchased you can see more about the Ryobi scroll saw here. And if you wanna know about the other tools I have in my shop I’ve written a break down of which tools every crafter needs.

I used my Cricut Explore to cut out the letter E and the dog from cardstock. Then I outlined them with a pencil on a scrap piece of 1x8 that had been sitting on the wood shelf in the garage. Using my new handy scroll saw I cut out the shapes. Gave them a light sanding and they were ready to add to the items we picked up at the dollar tree.

Here’s what we picked up from the dollar tree

• 1 package of purple/pink 6 pk glitter

• 1 package of blue/green 6 pk glitter

• 1 package of purple/pink sequence

• 1 package of small containers

• 2 paint pots

We bought the small containers to fill with white paint and glue {which we have a TON of at home} . Since the paint pots don’t come with white paint and sequence doesn’t stick well to paint we thought those additions to the birthday gifts would be a good idea. I wrote on the outside of the containers which one was glue and which one was paint so there wasn’t any confusion when the birthday girl goes to use her new craft kit.

The glitters and sequence were individually wrapped so we pulled them off of the original packaging {they were just taped to the thin cardboard} and gave each birthday girl 4 glitters and 2 sequence.

To keep the birthday crafts looking somewhat professional I packaged the craft supplies in a clear goody bag {the party favor kind} that we already had left over at home.

I am so excited about this new DIY birthday craft idea! It’s absolutely perfect for the crafty kiddo in your life and it costs just a few dollars to create! I can honestly say that our girls loved this idea so much they each want their own.

———> Want more crafty gift giving ideas? Check out my post on these top selling kid approved DIY CRAFT KITS FOR KIDS

——> Also, you don’t want to miss this a great list of the PRE TEEN CRAFT IDEAS, because they can be so hard to buy for sometime

How to stencil on a canvas bag

Learn how to stencil on a canvas bag

Have you been wanting to learn how to stencil on a canvas tote? It’s actually super easy! Make it an even more fun with a DIY CANVAS TOTE PAINT PARTY. I’ve put together this DIY canvas bag craft kit to make it even easier. There’s no guess work for you. Just choose your stencil and I’ll send you everything you need to make your party a hit!

If you love this tutorial you’ll probably love this other stenciling project I did a tutorial on. I show you how to make a custom name canvas and it is one of my most popular posts on my blog AND one of the most popular craft kits I sell in my Etsy shop.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

What’s included in the DIY canvas tote craft kit?

If you don’t purchase the kit here’s what you’ll need

• canvas tote

• craft paint

• stencil

• xacto knife

• vinyl squeegee

• sponge

A tip before you start… to get the best outcome you will want to use a contrasting paint color so that your colors really pop.

Ok, let’s get started painting on this canvas bag.

1. Flip your stencil over so that the white paper backing is facing up.  Then using your vinyl squeegee {burnishing tool} rub the stencil  backing.

2. Slowly peel the paper backing away from the stencil and transfer  tape {the blue & clear pieces}. GO SLOW and work from one corner  across to the corner diagonal from it. Another tip is to peel it away  at a very sharp angle, it helps to glide it across itself.

3. Flip you stencil over so that the sticky side is facing down. Now  place it on your bag. Use your vinyl squeegee to help press it to the  bag.

4. Slowly peel off the clear transfer tape. Use the same technique that  you did when taking off the paper backing. GO SLOW and peel  from corner to corner at a very sharp angle

5. Run your finger along all the exposed areas of your stencil. This will  help control the paint bleed and keep it minimal. If there are any air  pockets just press them out with our finger or squeegee.

6. Before you start painting you need a barrier between the two layers  of your bag so you don’t have paint bleeding onto the other side.  You can do this by placing a plastic bag inside your canvas bag,  making sure it is in the same place as the stenciled area.

7. Put a small amount of your paint colors on your paper plate. Using  a stenciling sponge LIGHTLY dip the bottom of the sponge into  your paint. Dab it off. You want VERY LITTLE paint on your sponge.  Too much paint will cause paint bleed.

8. Using an up and down pouncing motion apply the paint with the  stenciling sponge onto the exposed areas of the stencil. You do not  want to rub or make a back and forth motion. This will force the  paint up and under your stencil. Repeat this step until you have  painted all the exposed areas inside your stencil.

9. After you have your entire stencil painted it’s time to peel it up. You  do not need to wait for your paint to dry for this step. Just like you  peeled the paper backing and transfer tape, start in one corner and  peel to the opposite corner. Be sure not to drop your stencil  material on your bag as you peel. Use your xacto knife to take up all  the middles out of your design. THIS STEP MUST BE DONE BY AN  ADULT.

10. After your design dries REMOVE the plastic bag. It is best to seal  your design with heat prior to washing it. You can do this by simply  ironing it, do not iron directly on the painted area always use a  pillow case or tea towel between the iron and your design.

DIY 2x4 painted Halloween blocks

Easy Halloween Craft for Adults

Oh my goodness! I can’t believe it’s already time to start thinking about Halloween! Last year I was so crazy busy I didn’t hardly have time to decorate our home for fall let alone get new craft kits put together and listed in our Etsy shop. So this year I’m getting a super early start on all my DIY Halloween décor. And I’ve started with this super cute 2x4 craft.

Already know you want this? Skip this article and get your DIY HALLOWEEN CRAFT KIT

I try to keep my craft kits pretty simple and easy to DIY and this one is no exception. This craft really takes me back to my childhood watching my grandma make all her primitive décor. She could free hand ANYTHING and it always looked amazing. But not to worry because with this craft kit you won’t have to free hand a single thing and your craft will turn out just as AMAZING!

So, what comes in this Halloween craft kit?

BASIC KIT includes
• 3 - 3.5x3.5x1.5 pre-sanded blank wood pieces
• 1 - 10.5x3.5x1.5 pre-sanded blank wood piece
• 3 stencils: ghost, pumpkin, frankenstein {no transfer tape attached as these are little detail and do not require it to transfer on to wood}
•wood stem
•fabric piece {color will vary}
•professional quality vinyl decal: Trick •or• Treat
•detailed instructions PLUS a video link for video instructions on our DIY website.

PREMIUM KIT includes
•basic kit
• acrylic paints: black, white, orange, green
•sandpaper
•3 sponge brushes
•stenciling sponge

---

Grab your girlfriends, some wine and catch up while each making your own set of these adorable ghosts, pumpkins, and Frankensteins.

Already have the paint/brushes and just need the wood and stencils? Perfect! You get to choose the type of kit you receive, pick from basic or premium. No matter which kit you choose it will come with printed picture instructions and a video link, in case you need a little more visual {which is totally the kind of learner I am!}.

Click the link ——> DIY HALLOWEEN CRAFT KIT to snag your craft kit before the holiday season so you are just as prepared as I am this year.

If you love more traditional Halloween décor check out these super cute DIY wood pumpkins

5 awesome craft kits your kids will love

Craft kits kids will love

Kids love to create. They have creativity coming out their ears it seems like. Back when we had our brick and mortar craft studio we would sell these kits like crazy! And now we have them online so kids all across the world can enjoy them.

Don’t want to buy the kits but want to know how to make the craft? I’ve got ya covered! After the end of the descriptions I’ve included the link to the tutorial here on my blog.

Here are our top 5 craft kits that have been kid tested and APPROVED!

1. DIY glittery unicorn mason jar

This unicorn mason jar craft kit is one of our top selling craft kits we ship. Each kit comes with a pre-painted mason jar so you don’t even have to worry about that step {painting mason jars can be a challenge due to curing times in between coats}. Upgrade to a unicorn mason jar craft party size

Check out the DIY glittery unicorn jar tutorial

2. CUSTOM name canvas art

What kid doesn’t want their name on a beautiful canvas that they paint? This custom name art canvas craft kit comes with everything your kiddo needs to have a personalized canvas art. Your name of choice comes already attached to the canvas so it’s ready to go right out of the box. Once your kiddo paints their canvas you simply peel up the stencil to reveal the white lettering underneath. This custom name art craft is also available in party sized, actually this a great option for family get togethers to give the little ones something fun to do.

Check out the DIY custom canvas art tutorial

3. LOVE canvas art craft kit

Much like the craft kit above this canvas art come with the stencil already applied and ready to create right out of the box. This Valentine’s Day canvas art craft kit is always a big winner with moms and kids!

Check out the DIY canvas art tutorial

4. Mixed media canvas art craft kit

I can’t tell you enough how much kids LOVE this custom initial craft kit. The get to choose their own colors, buttons, rhinestones, and glitter and totally make it their own. This kit is so much fun and more!

Check out the DIY custom mixed media name canvas art tutorial

5. DIY light up fairy jar

Calling all whimsical fairy believers! This light up fairy jar craft kit will make a perfect gift for the fairy lover in your life. This kit includes a smooth mason jar, embellishments, cardstock fairy, glitter, twine, tissue paper, and a battery operated light. Full picture instructions are included.

Check out the DIY glittered light up fairy jar tutorial

There you have it our top 5 craft kits approved by kids! Each and every one of these kits was a top seller in our brick and mortar craft studio and they each continue to be top sellers in our online shop.

If you have any questions on the craft kits please feel free to reach out to me. Each one come will full picture instructions and materials to complete each craft. Please note tools such as a glue gun are not included inside our DIY kits.

How to host an adult Pinterest party

Hosting a PINTERST party is easier than you think!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

1. Decided on your project

To make this super easy the host should pick this. If you’re having a hard time deciding check out my Pinterest boards for inspiration. Seasonal crafts are usually a big hit!

2. Location

For most people their home works just fine for this type of party. If your house is a little too cozy you can always opt for the garage or backyard , if weather permits. If you plan to host a lot of friends for your craft party you can look into renting space at your local community center.

3. Invites

I wouldn’t go inviting everyone on my social media friends list but I would invite those that I actually enjoy spending time with. You can get super fancy and mail out invites or you can text, email, or do a Facebook invite. All are good options, personally I’m a texter so that’s the route I would go.

4. Getting crafting materials

Instead of asking Susie to bring this and Sally to bring that I would opt to getting all the materials and splitting the cost between everyone. That way you know everything will be at the party and you don’t have to run to the store just when the party is getting started because Sally didn’t let you know that she couldn’t make it {and since she couldn't make it the materials she was supposed to bring doesn’t make it either}. Remember to include any brushes or paint trays {paper plates are great for this} that you might need. These are all items you’ll need to provide depending on the project you pick.

5. Costs

Add up all the materials you had to buy then divide that by the number of people, including yourself, that will be attending the party. That will give you the cost per person. It’s a good idea to make everyone pay BEFORE you host the party. You can do this a number of ways.

• meet up with cash

• mail a check

• Paypal

• Facebook pay

• a number of other money accepting apps

6. Setting up

If not renting space you need to be sure you have enough seating for everyone. If you don’t have enough you can buy tables/chairs pretty inexpensively or you can always rent them from a local party rental company. I suggest using drop cloths for table covering as they are think and absorb spills but if it’s not in the budget plastic table coverings work well too. You might look into supplying aprons or ask your guests to bring their own. I am a very messy crafter and without an apron I wouldn’t have any clothes that aren't covered in paint. Here are the black aprons I use for my craft business. They have held up extremely well and nothing has yet to get through them.

7. Drinks

What’s a craft party without drinks? Ask everyone to bring in their favorite adult beverage. This will not only make for great conversations but this will ensure that everyone has a drink they like.

If you want to make your next party even easier try one of our craft kits or this paint party kit from Amazon.

Remember to have fun! Don’t go overboard on the details. I’ve found the less I stress about the small details of a party the more fun I have. So if you forget something it’s ok, it’s not the end of the world and it could just make your party even more fun and interesting with having to improvise a little.

---

DIY 4X4 Wood Firecrackers

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I am a sucker for a quick and easy simple crafts! These kind of projects give you an instant satisfactions because you don’t need to wait days for them to cure and you can even get the kiddos involved in the creative process because honestly there’s not a whole lot they can mess up with these little guys.

This project does require the use of some power tools but if you don’t have them handy you can purchase an easy craft kit from our studio. We do all the cutting, pre-sanding, drilling, and include all the materials PLUS printed of instructions on how to make them at home so you don’t have to come back to this page while your hands are covered in paint.

Here’s what you’ll need if you’re making yours totally from scratch…

• 4x4 wood blocks cut approx. to lengths of 4, 5.5, & 7 {you can pick this up at your local hardware store}

• twine

• 3 paint brushes

• acrylic paint in RED, BLUE, WHITE

• antiquing wax

• RYOBI cordless sander or sandpaper

• RYOBI miter saw

• RYOBI drill

• RYOBI drill bit

• baler wire {you can pick this up at your local farm store}

• wire cutters

• glue gun

If you prefer to order online I’ve attached Amazon links to most of the supplies above. You can purchase most of the supplies at your local Walmart and home improvement stores.

First you need to cut your 4x4 down to 4, 5.5, and 7 inch lengths. Some home improvement stores will do this for you but usually their blades are very dull and will splinter your wood badly. For this project the splinters would add a ton of character but I wouldn’t depend on this being an option for most of your other DIY projects.

My husband got me my own saw last year and I am LOVING it! Granted it was more money than I wanted to spend but it has been one of the best investments we’ve made in our business. Ryobi makes a really great line of tools, especially if you’re just using them to make projects for your home or running your own creative craft business like I do. This particular saw is great because it is a slider. It can cut anything from 1/2” pieces all the way up to 12” wide {and probably a little wider but I only cut up to 12”}.

After your pieces are cut you need to give them a quick sanding. Again, I use my trusty Ryobi tools for the job. I typically use 120 grit sandpaper for most of my projects. This is a good in the middle grit. If you want to get crazy you can sand with all the way thru the different grits but I don’t usually do this…I’m a busy momma of four 120 works perfect, lol!

After you have your pieces sanded be sure to wipe off all the saw dust. You don’t want this on the wood when you start painting.

Depending on the size wire you get will depend on the size drill bit you’ll need. Drill a hole in just the top of each piece of wood. I drilled mine about 1/2” deep.

Paint each of your blocks a different color. You’ll need one red, one white, one blue. I did two coats on mine. This is a good time to get the kiddos involved. They really can’t mess these little guys up. Be sure to let the paint dry COMPLETELY between coats. If you don’t your paint will likely pull away from the wood as you apply it on top of wet paint.

After both coats are dried you want to give your blocks a light sanding. Focus on the edges and the corners.

Using your chipbrush apply a light layer of the antiquing wax to the areas you sanded. You can do this as heavy or as light as you like. Remember a little bit goes a long way and you can always add more if you want to.

Now add a little hot glue to the end of the wire and quickly stick it down in the hole you drilled. Once they are dry and in place you can twist them if you’d like.

Wrap the middle of each wood block in twine and you’re done! Super easy!

I hope you found this craft as fun as I did! Enjoy your Fourth of July!

---