DIY 4th of July wood tags

Easy 4th of July wood tags for rustic decor

I love those little wood tags. They are oh so cute and fit perfectly on a farmhouse style tiered tray. You can literally create these wooden tags for any occasion or season AND they are SO cheap to make! Especially if you have scrap pieces of 1x4’s around.

For my 4th of July themed coffee bar I told myself to get an early start because I would totally put it off and not make all the things in time to both share with you all AND get my display up in time to enjoy it for the holiday. So I got my butt in gear, cut myself some wooden tags, put on some makeup & real clothes and went live on my Facebook page while I made these little wooden patriotic tags.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Here’s what you need to make Fourth of July wood tags

• wood tag cutouts (click here to see how to make them yourself)

• red, white, and blue acrylic paint

• wood star or star template

• jute or twine

• paint brushes

• sandpaper

• heat gun (if you want to speed up the drying process)

• chip brush for antique wax

• antiquing wax

• scissors

• lint free cloth

• paint tray

• canvas drop cloth to protect your surface

1.PAINT THE WOOD TAGS

Since these are patriotic themed wood tags I went with the colors red, white, and blue.

I painted two of the tags all white, when the first coat was dry I painted a second coat on them. Sorry for the grainy pic I took snips for my fb live I did to create these.

Then I painted the third wood tag blue. I used an English blue and not a true blue so it would tie in better with my rustic farmhouse looking home décor.

2. PAINT RED STRIPES

Unlike my chunky 2x4 wood flag where I used tape and got a cleaner look I just eyeballed the stripes on these wood tags and was happy enough lol! But if you want a little cleaner lined look to your stripes you can use masking or painters tape to make the lines a little straighter, even, and more crisp.

I painted 3 stripes on each wood tag. One down the center then one stripe on either side of the center stripe.

3. ADD A STAR

You can free hand this, use an adhesive stencil, a cardstock stencil, or trace a wood cutout of a star like I did. I had a leftover star from a Christmas ornament that I didn’t use so naturally I put it with the rest of my hoarded craft supplies. I centered it on my wood tag then traced around it with a pencil.

I took a small paint brush and painted a thin coat of white acrylic paint. After that was dry I painted a second coat over it.

To help speed up drying time I used my heat gun. This tool was so inexpensive and comes in handy all the time!

4. DISTRESS THE WOOD TAGS

If I was not in my house I would have used my sander for this step. But since I was inside I used 150 grit sandpaper. I focused on the edges and corners and lightly went over the fronts of each wood tag.

5. ANTIQUING WAX

If you’ve read some of my other posts you might know that I LOVE antiquing wax for my distressed pieces. This stuff is so good and gives pieces such a primitive look.

If you want a more in-depth tutorial on how to use ANTIQUING WAX I created an entire post on how I use it on my craft projects.

6. ADD TWINE TO YOUR WOOD TAG

The last step is to add a piece of twine to your wood tags. I went with a thicker jute for my tags since the hole I drilled in the 1x4 tags was on the larger side.

That’s it! These wooden tags are so easy to create for your rustic 4th of July decorations. If you have any questions leave them in the comments below.

Happy Crafting and be sure to check out more DIY craft tutorials below.

Halloween wood tags, how to DIY your own set of cute spooky mini tags

DIY WOOD TAGS FOR HALLOWEEN

I just love these adorable rustic wood tags! Since they are so small they make such perfect little accents to your décor. Especially these Halloween wood tags. I made these adorable little guys and placed them in my Halloween porch décor. Oh my goodness they look so cute with all the orange, black, and rustic-ey decorations!

If you love this tutorial be sure to check out these mini wooden fall signs

If you don’t have all the tools/materials to make these little wooden tags from scratch you can grab a DIY CRAFT KIT HERE.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

This DIY HALLOWEEN CRAFT KIT COMES WITH

• 3 precut and lightly sanded 5” wood tags

• professional outdoor grade vinyl cut outs

  • HAPPY HAUNTING

  • spider web image

  • OCTOBER 31

• detailed picture instructions

• ****paint and brushes are NOT included

If you don’t need a DIY CRAFT KIT here’s what you’ll need

• black, orange, & white vinyl

• transfer tape, here’s one with gridlines for easy application

• vinyl squeegee

• black and white paint

• paint brushes or sponges

• sandpaper

• twine

• 3 wood tags 5”, I cut mine from a 1x4

• Cricut cutting machine

• green Cricut mat

• Cricut Design space

• HALLOWEEN SVG’s

• I also recommend using a drop cloth to protect your crafty surface

Want to know how I make my wood tags? Click here to read my post on DIY MINI WOOD TAGS, it also includes a video tutorial.

After you have your wood pieces cut out, sanded and your vinyl decals cut, weeded, and transfer tape applied you can start on the steps below.

If you want to learn how to cut out your own wood tags read this post. If you are new to Cricut, or the world of fancy cutting machines in general, check out my post on the 10 must have accessories and supplies to get for a Cricut newbie

1. PAINT

Paint 2 of your wood tags black, one coat will be fine for this, and 1 of your wood tags white, this will need 2-3 coats. Let dry. Letting your wood tags dry completely is a MUST. If your paint is still wet when you move on to the next step your vinyl will not stick to it.

2. DISTRESS

Using a piece of sandpaper distress the edges. You’ll want to focus on the edges and any area that you think would have a natural wear to it.

Then wipe with a lint free cloth.

3. APPLY DECALS

Be extra sure that your paint is completely dry before you start this step. Vinyl does not stick to wet paint.

Using your vinyl squeegee, a plastic rewards card will also work for this step, rub the front of your Halloween themed vinyl decal.

Flip it over and do the same thing on the backside.

Then peel the paper backing away from the clear transfer tape, your design should stay attached to the clear transfer tape.

Flip your vinyl decal sticky side down onto your wood tag. Don’t push it onto the wood tag until you are happy with the placement, then press it down. Use your vinyl squeegee for this step. Then remove the clear transfer tape.

Start on one corner then slowly peel your way to the opposite corner. If your decal comes off with the transfer tape just press it back down and slowly roll the transfer tape away from the decal again. Be sure you take your time during this process, especially if you are new to the decal game.

BLACK TAG: HAPPY HAUNTING decal

BLACK TAG: OCTOBER 31 decal

WHITE TAG: SPIDER WEB IMAGE decal

4. TWINE

Add some twine to make them even more adorable! Feed the twine through the hole in the top middle of the tag. Then tie the two twine ends together.

You’re all done! I hope you enjoyed this DIY craft tutorial. If you have any questions please ask in the comments below.

Happy Crafting!

Classic farmhouse tiered tray signs

Tiered tray sign bundle for your CLASSIC looking farmhouse decor

I am loving this tiered tray decor that’s all the rage right now. There are so many different seasons, holidays, and themes you can do. Or you can keep it super classy and simple with the classic black and white farmhouse colors. There is so much you can do with these simple color scheme. You can keep it black and white or add a couple rustic pieces that will give it a pop of color here and there. I love how versatile it is!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

If you LOVE this crafty post be sure to check out how I made a mini house family number sign. Instead of using vinyl like I did on these rustic farmhouse mini signs I painted it instead.

If you’re in to the rustic farmhouse style how can you not love a mini wooden tag that has farm animals on it?! This one is probably my favorite of all the bundled pieces. I absolutely LOVE chickens! Well of course cows and pigs too but chickens are really my favorite farm animal! Every time I see one, whether that be a real life chicken or a picture of one, I smile! They are just too cute!

TIERED TRAY RUSTIC SIGNS

For this tiered tray bundle I incorporated different sizes and shapes to these farmhouse pieces mix it up a bit. I typically create identical bases for my handmade sign pieces, like these hilarious rustic looking cactus signs. Another example are these Easter mini wood tags. They come in a set of 3 but they are all the same sized wood base. While they are super cute I am really loving the mix and match look of the different sized and styled bases of these classic farmhouse tiered tray signs.

Here are the sign bases I used:

• MINI ROLLING PIN

• MINI WOOD HOUSE

• MINI WOOD TAG

• MINI WOOD SIGN

Since they are all different sizes and shapes they truly work perfectly for the tiered tray signs.

Unlike most of my signs I actually chose to use vinyl on them instead of painting the entire design. I have been one BUSY momma this year so I’ve been adding more simple designs and styles to my shop line up. I guess I always thought using vinyl was “cheating” in the sign making game but I have no regrets using the vinyl on these designs. They are quick to make, priced at a more affordable price point, and I can get them out to my customers even faster because it takes SO much LESS time to create.

While stenciling designs will always be my preferred method for making signs I do love how these vinyled signs turned out. So much that I have plans to add even more in my shop!

You can grab the FARM FRESH design in my FREE RESOURCE LIBRARY.

Want your own set but don’t want to make them? You can purchase your handmade signs from my shop, click here —-> CLASSIC FARMHOUSE STYLE TIERED TRAY SIGNS

If you are a DIY-er and want to make your own rustic farmhouse style tiered tray signs here’s what I recommend you use.

• matte finish black vinyl

• transfer tape

• vinyl squeegee

• white paint

• mini rolling pins

• paint brush

• xacto knife

• sandpaper

• Cricut

• Cricut Design Space

• green Cricut cutting mat

• HOME SWEET HOME SVG

• FARM ANIMAL SVG

• OUR NEST SVG

• FARM FRESH SVG

New to Cricut? Check out these 10 must haves to get you started on your crafty journey

I don’t have a full on tutorial on how I made these signs they were really pretty simple to make since there wasn’t any stenciling involved. Stenciling is a WAY more involved process. But this process is super easy.

Here’s how I made my rustic tiered tray signs

1. Paint each wood base white. Let dry. Paint a second coat. Let dry.

2. Once dry distress the edges. Wipe with a dry lint free cloth.

3. Cut out your designs using your Cricut, or other cutting machine.

4. Weed your designs using your xacto knife.

5. Apply your transfer tape and remove paper backing from your designs.

6. Place your designs on your wood bases. Rub with your vinyl squeegee and remove your transfer tape.

7. Add any twine accents.

8. Place on your tiered tray and enjoy!

It’s really that simple! No messing with paint bleed. No fuss with drying time between stenciling paint coats. No stress about paint peel up. I really enjoyed how quick and easy these DIY mini wood signs were!

I hope you enjoyed this crafty tutorial. If you have any questions please feel free to ask in the comments section below.

Happy Crafting!

See how I make my mini wood tags. Don’t have the power tools to create the tags from scratch? Grab the unfinished wood tags here.

DIY Tiered Tray signs for 4th of July with Rae Dunn inspired SKINNY FONT

DIY 4TH OF JULY TIERED TRAY WOOD SIGN

RED, WHITE, AND BLUE rustic mini signs… yes!! Tiered tray signs are all the rage right now. If you’ve been on Pinterest, Etsy, or anywhere in between then you’ve definitely seen these little farmhouse looking beauties! They are usually made using a simple design and just tie in perfectly with the whole clean rustic look that’s in right now.

If you’re wanting to make your own mini wood signs it’s actually pretty easy to do. I make my tiered tray signs from 1x4’s that I cut down using my miter saw BUT even if you don’t have access to power tool you can still make your own mini wood signs! I’ve put together this DIY PATRIOTIC CRAFT KIT you can grab online in my shop. It comes with everything (except paint brushes) you need to make your own Independence Day signs at home. No need to go out and buy any fancy equipment or tools, especially if you don’t plan on making a ton of DIY craft projects.

If you are wanting to take the sign painting world by the horns be sure to read these 6 must haves for painting wood signs. I share the basic must haves to get you started on your own sign painting journey.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

DIY 4TH OF JULY WOOD SIGNS FOR TIERED TRAYS

Here’s what you’ll need to make your own set of patriotic wooden signs

If you purchased the PATRIOTIC DIY SIGN PAINTING KIT your wood blanks will come pre-stained. You can skip to the step #3

• pine 1x4 cut into these lengths: 6”, 10”, 12”

• Cricut cutting machcine

• Cricut Design Space

• Cricut green cutting mat

• oramask stencil film

• transfer tape

• vinyl squeegee

• stenciling sponge

• red, white, blue, black acrylic paint

• paint brushes

• stain color of choice

• lint free cloth

• gloves to protect your hands when staining

• Ryobi miter saw

• Ryobi sander

• 120 grit orbit sand paper

• xacto knife

• FREE CRICUT 4TH OF JULY CUT FILE

1. CUT & PREP YOUR WOOD PIECES

If you purchased the 4TH OF JULY DIY CRAFT KIT you can skip this step. If not you need to cut your 1x4’s to 6”, 10” and 12”. I use a miter saw to cut mine then give them a quick sanding with120 grit sand paper using my orbit sander. I stain my pieces then let dry for 24 hours. Once dry I sand around the edges to give it a distressed look. Now they are ready for paint :)!

2. CUT YOUR STENCILS

Cut out your stencils on your cutting machine, I use an older model Cricut explore and it always does a perfect job! I highly recommend using Oramask stencil film to cut your stencils out of. This material is specifically made for stenciling and performs very well. Weed your design and apply transfer tape to it so it is ready to go. Get your FREE Cricut cut files here to use for this exact 4th of July project.

3. PAINT YOUR BACKGROUND COLOR

Using a dry brush apply a THIN coat of paint on the front side of your wooden bases. For a more rustic look apply the paint so that it doesn’t touch the edge of the wood base and so that it a little uneven. Let that dry then paint a second coat. Let the second coat completely dry.

4. APPLY YOUR STENCIL

Using your vinyl squeegee apply your stencil to your painted wood base. Once you feel it is adhered good slowly remove the transfer tape off of your stencil. The best way to do this is to start at one corner and slowly roll the transfer tape off of your blue stencil material. PRO TIP: you never want to pull up when removing your transfer tape, this will cause your stencil to pull up as well. Use your finger to rub the exposed area of the stencil to work out any puckers or air bubbles.

5. PAINT YOUR STENCIL

Cut your stencil sponge into 3-4 sections, depending on the number of different colors you plan to use. Lightly dip the end of one of your stenciling sponges into your paint of choice, dab off excess paint onto a scrap piece of cardboard (or something similar) then using an up and down dabbing motion dab it onto the exposed areas of your stencil. Your paint coverage should be super thin, you want to be able to see the background color at this point. Let dry. Once dry dab on a second thin layer. If you are happy with the coverage you can move on to step 6. If you want a little more coverage wait for the second layer to dry then dab on a third layer of pain

6. REMOVE YOUR STENCIL

Using a sharp xacto knife or sewing pin peel your stencil up while your paint is still wet. Be careful not to touch the wet paint. Let your painted wood sign dry.

7. DISTRESS

This step is completely optional. If you want a little more rustic look lightly go over the front of your wooden sign with a sanding sponge or piece of sandpaper. I personally like adding this touch to my signs to give it a more farmhouse look. Wipe off the dust with a lint free cloth and you are ready to display them on your tiered tray.

DIY How to make a RUSTIC UNICORN sign + FREE SVG

Unicorns…my third daughter is OBSESSED with these magical creators and has been for years. She was the inspiration behind these rustic looking glittery unicorn themed mason jars that we found on Pinterest and HAD to make our own. Everything is unicorn theme from her bedroom décor to her birthday party themes to her clothing. So, this year for her birthday of course she asked for…you guessed it UNICORN themed presents!

With all the craziness going on the world in the year of 2020 she couldn’t have a traditional birthday party. BOO! Instead she had a small but SUPER FUN day at home filled with a unicorn shaped cake made by her older sisters and LOTS of fun outdoor activities.

While she did get a few store bought gifts I thought it would be so fun to make her a rustic looking unicorn sign to hang in her unicorn themed side of the bedroom. She already has this gorgeous unicorn themed bedspread and SO many other purple glittery unicorn knick knacks I thought this sign would tie in perfectly with all of it.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

And she LOVED it! I was so happy because sometimes you make or buy something for your kid and you don’t always get the reaction you were hoping for. You know the one where they give you a huge smile and a thank you but you can tell deep down that it really wasn’t what they were expecting. Thank goodness my sweet girl BEAMED with unicorn excitement when she got her handmade rustic always believe in magical things sign from her momma! YAY a mom WIN!!

If you want to make this exact unicorn SVG you can get it for FREE here in my FREE RESOURCE LIBRARY. If you’re new to the blog my resource library is where I share all of my freebies. It’s all in one place so you can access it super easy. Just click here to get my password. If you already have the password click here and it will take you to my secure page.

Here’s what you’ll need to make your own rustic unicorn sign

• always believe in magical things FREE SVG

• Cricut cutting machine, the MAKER or EXPLORE

• Cricut Design Space

• Cricut cutting mat

• Oramask stencil film

• transfer tape

• vinyl squeegee

• xacto knife

• premade pallet sign - DIY tutorial to build a pallet sign

• acrylic paints

• assorted flowers

• paint brushes

• stenciling sponge

• cone form

• floral wire

• hot glue gun

• gorilla hot glue sticks

• nail polish I used a glittery gold

• tulle

HOW TO MAKE A RUSTIC PALLET STYLE UNICORN SIGN

For this tutorial I’m starting with a pre built, stained, and painted pallet style sign. If you’ve never built a pallet style sign before not worries they are actually really easy to make. You can read my post on how to built your own pallet style sign here. I also used a weathered gray stain on this wood unicorn sign along with white paint for the background colors.

1. CUT OUT YOUR UNICORN STENCIL

The first thing I did was cut out my stencil on ORAMASK STENCIL FILM. If you plan to cut out a ton of stencils and want to buy stencil film even cheaper you must read my oramask stencil film post on how I dramatically my out of pocket on this material for my small business. I used my Cricut to cut out my stencil and weeded my unicorn themed stencil with a super sharp exacto knife.

If you’re new to the Cricut world here are 10 must have to get you started on you Cricut journey.

2. APPLY YOUR UNICORN STENCIL

Using transfer tape apply your unicorn stencil to your wood base. When removing the transfer tape it’s easiest to roll the transfer tape off your of stencil film. Use your vinyl squeegee to get your stencil good and adhered to the base of your unicorn sign.

3. PAINT YOUR STENCIL

To prevent tons of paint bleed you can seal your unicorn stencil first with the same color paint that you used for your background color. In my case I used white paint because my background is white. The wood I used to make my daughter’s rustic unicorn sign was EXTRA RUSTIC. Meaning it had lots of imperfections. The wood was very uneven, rounded on the edges, and had small and large gouges all over. I knew even with sealing my stencil I would still have paint bleed unless I took extra time to paint the sign very slowing. I’m a momma of 4, I don’t have time to be that perfect lol so my sign had more than usual paint bleed. When painting your stencil you can use a cosmetic sponge or a paint brush. If using a cosmetic sponge you want to make an up and down dabbing motion to paint the stencil. Do very THIN even coats and layer up to 3 THIN layers but no more than that. I promise the coverage will be darker once the stencil is removed.

4. REMOVE YOUR STENCIL

An xacto knife works great for removing stencils. Just be sure is super sharp. If you don’t have an xacto knife you can also use a sewing pin. You want to gently lift the stencil film up and off your wood base without causing damage.

5. DISTRESS YOUR UNICORN SIGN

I used a sanding sponge to lightly sand over my lettering on my unicorn pallet sign once my paint was dry. Just to give it a little more rustic look. I didn’t want my sign to be all gorgeously distressed and the lettering be crisp.

6. PAINT ON UNICORN EARS

I almost forgot to do this part…insert facepalm!… I freehanded the ears with a pencil then painted them in with light pink paint. I added a little detail with a little bit of gray paint while the pink paint was still wet just so they didn’t look so flat. Then I distressed them with the sponge sander.

7. MAKE THE HORN

I used a foam cone for this and cut it down to the size I needed. I used craft paint for this instead of spray painting it (check out my tips for spray painting Styrofoam here). Let dry. Once dry wrap it in tulle, I did this several times to get a good coverage.

8. ADD ACCENTS TO THE HORN

I only needed a small piece of wire for this project so I used what I had on hand. I only had silver or green floral wire so I painted a piece of the silver wire with glittery nail polish and let it dry. Then I wrapped it around the horn and secured the ends inside of the foam. This really made a big difference in how the unicorn horn looked overall. Without this piece of glittery wire I don’t think it would have turned out as cute.

9. GLUE ON FLORAL UNICORN CROWN

I picked up my floral accents from Walmart. It’s spring/summer so they had a great selection of florals that had a magical unicorn vibe. I used gorilla hot glue in my glue gun to attach them to my wood base. I highly suggest doing a dry run with the floral crown before you actually glue them down. You want to make sure you are going to like the placement before you commit to the glue. Don’t be afraid to cut down your florals. Sometimes you just need a small piece of baby’s breath instead of a whole piece of it.

Some of the florals I used on this unicorn crown were leftover from these DIY corsages I made from my youngest three daughters for the daddy daughter dance. I love that I could also incorporate them into this piece. They were such beautiful florals and my store was completely out of them so I couldn’t get any more for this sign.

Now you’re ready to give this gorgeously rustic unicorn sign to your sweetest unicorn obsessed little girl to hang in her room. I hope you enjoyed this crafty tutorial. If you have any questions please leave them in the comments below.

Happy Crafting!

DIY mini wood house family number sign

DIY how to make a rustic wood house sign for your farmhouse style home decor

How to make mini wood houses from a 1x4. Stenciling a wood family number sign. DIY rustic farmhouse decorations to make at home, easy

Have you seen those adorable tiered tray signs on Pinterest? They are oh so tiny and oh so ADORABLE! They tie in perfectly with any rustic farmhouse style décor. If you have a miter saw you can make these little beauties at home.

If you don’t have a miter saw but still want to DIY these mini wood houses no worries! You can grab these precut unfinished wooden houses in my shop.

I used a scrap piece of 1x4 to make mine. Click here to read more of my SCRAP WOOD PROJECTS.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional

Are you planning on making LOTS of signs using stencil film? You must read how I save TONS of money by buying my oramask stencil film this way.

Click here to grab your own rustic wooden mini house DIY CRAFT KIT

Make your own tiered tray mini house signs

Here’s what you’ll need to make your own mini rustic wood houses

• 1x4 or precut wood houses

• miter saw

• sander

• 120 grit sand paper

• Cricut cutting machine

• Cricut Design Space

• Green Cricut cutting mat

• oramask stencil film

• transfer tape

• vinyl squeegee

• white and black acrylic paint

• paint brush

• family number SVG

1. CUT OUT YOUR WOOD HOUSE

The first thing I did was to cut my wood house out of 1x4 scrap piece of pine. Well, my husband cut mine out because he was bored lol. He cut them using a 30 degree angle on the miter saw. Then cut them to the length you want. The one I’m making for this rustic craft tutorial measured approx. 4” in length. Then I sanded it down using my Ryobi orbit sander and 120 grit sandpaper.

2. CUT OUR YOUR STENCIL

I used my Cricut explore to cut out my stencil. I have yet to get a Cricut maker because my Explore is still going strong :)! I used a scrap piece of ORAMASK STENCIL FILM and this FAMILY NUMBER SIGN SVG. I’ve found that using an xacto knife to weed your designs works even better than traditional weeding tools. If you’re new to CRICUT be sure to check out these 10 supplies and accessories you need to get started with your Cricut.

3. PAINT YOUR WOOD HOUSE BASE

I chose to keep my mini wood house sign simple and paint it all white. I used acrylic paint and painted two coats for a decent coverage. Let completely dry.

4. STENCIL YOUR WOOD HOUSE

I stenciled a family number sign on my wood house and I love how cute it turned out. I applied my stencil using transfer tape and a vinyl squeegee. Then removed my transfer tape once it was properly adhered. If you don’t want any paint bleed be sure to seal your stencil. you can do this using the same paint as your background color. See how I also did this on a reverse stenciled sign to get crisp no paint bleed lines. Let dry.

5. PAINT YOUR STENCIL

I kept it safe and painted my family number stencil with black acrylic paint. I did one thin coat. Let dry completely. Then painted a second thin layer.

6. PEEL UP YOUR STENCIL

While your stencil paint is still wet use a sharp xacto knife OR sewing pin to peel up your stencil. Be careful not to guage the wood underneath. You want to carefully lift the stencil film up off the wood then grab it and peel away.

7. DISTRESS

If you like your sign without distressing then you are ready to display it once the lettering is dry. But if you’d like to add a little more rustic charm to it you can do so with your sander, after your lettering is dry of course. I use 120 grit sandpaper for pretty much all of my craft projects and it’s what I used to distress this mini wood house sign too. Focus around the edges and corners then lightly go over the front of the sign. I went a little crazy on my mini wood sign but I still like it. I think it just adds that much more character.

CLICK HERE TO GET INSTANT ACCESS TO ALL OF MY FREE SVG’S, PRINTABLES, AND MORE

Now you're ready to display it in your home. I hope you enjoyed this crafty tutorial. If you have any questions please ask them in the comments.

Happy Crafting!

DIY how to build a pallet style wood sign

We’ve all seen them, those gorgeous pallet style signs. The ones that are the spotlight of our rustic farmhouse dreams! Did you know there IS an easy way to make them? One that won’t break your back AND one that doesn’t break the bank. If you’ve been in any craft store in the last year you know what I’m talking about. Yes, prebuilt pallet signs are super convenient but they are expensive for what they are. Most are very thin and will break easily.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Don’t get me wrong I LOVE drooling up and down the aisles of Michael’s of all the different crafts I can create but I also know that I can make a pallet style sign for a fraction of the price that it would cost to buy one from there. Granted I would have to do the work BUT it is actually SUPER easy to make one of those pallet style signs at home. If you have the tools you can make your own pallet wood blanks too.

After you read this tutorial check out these 6 MUST HAVES FOR STENCILNG WOOD SIGNS

Here’s one that I made using old fence wood. While I LOVE the look of this one this rustic looking wood can be really hard to come by so I don’t get to make these beautiful ooking signs often.

Here’s another version of a pallet style sign. For this one I used new wood and stained it in weathered gray. Then I distressed the edges and corners to give it a little character.

HOW TO BUILD YOUR OWN PALLET STYLE WOODEN SIGNS

HERE’S WHAT YOU’LL NEED:

• wood

• miter saw

• brad nailer

• brad nails

• sander

• sanding discs

• wood glue

CLICK HERE TO LEARN HOW TO ATTACH A SAWTOOTH HANGER TO YOUR WOODEN SIGNS & DECOR

ONE- Figure out what type of wood you are going to use. I recommend you don’t use anything thicker than 1”. Anything thicker will be very heavy. For this tutorial I am using a 1x4.

TWO- Decide how big you would like your sign to be, width and length. Measure out your pieces and mark them.

THREE- Use your miter saw to cut the pieces to the width you would like. Don’t worry if they are a little off you can fix that once you have your pallet sign built.

FOUR- After you have your pieces cut lay them out fronts facing down. Wood will often have one side that’s “prettier” than the other so choose which side you want to put your design on and place that facing down on your workspace.

FIVE- Cut down two pieces of skinnier wood that are shorter than the length of your pallet sign, these will be your support pieces to place on the backside of your sign so it stays together. If I’m making a smaller sign I will usually use yard stakes for this but you can use a 1x2 if making a large sign. I just eyeball how long I want it to be and cut two to that length.

SIX- Put a little bit of wood glue on your support pieces then place them on the back side of your pallet, they will go in the opposite direction that your pallet boards are running. Use your nail gun to nail them in place. You can also use a hammer and nails it will just take a little bit longer.

SEVEN- If your pieces are uneven and you want them to be perfectly square you can do that with your miter saw. My ends are ALWAYS a little uneven. So I take them to my miter saw, line the shortest one up with my laser on my saw and cut off the extra on both ends.

EIGHT- Sand your new sign. I recommend an orbit sander and 120 grit sandpaper.

I hope you find this tutorial helpful. As with all of my DIY crafts if you have any questions please feel free to ask away.

If you want to hang your new beautiful handmade sign in your home read this easy and quick tutorial on how to attach a sawtooth hanger to wood signs.

Happy Crafting!

DIY 4th of July painted wood stars

HOW TO PAINT FREE STANDING RUSTIC WOOD STARS FOR YOUR INDEPENDENCE DAY DECOR

These DIY wooden stars are sure to tie in perfectly with your patriotic décor. Whether your red, white, and blue decorations are seasonal or you leave them up all year round you'll definitely want to add these adorable wood stars.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

These are especially a perfect project for those scrap pieces leftover from other DIY projects. Click here to see how I cut these out using my Cricut machine and Ryobi scroll saw. If you don’t have all the tools to make this craft happen or just don’t have the time you can grab your DIY craft kit here.

Watch the how to video below or keep scrolling for the written rustic 4th of July stars tutorial

Here’s what you’ll need:

• FREE STANDING WOOD STARS (grab your craft blanks here)

• RED, WHITE, AND BLUE ACRYLIC PAINTS

• PAINT BRUSHES

• SANDPAPER

These little rustic wooden stars are SUPER EASY to paint. I am actually thinking about making a few more and staining them instead of using paint. But for now I’ll admire the red, white, and blue ones.

ONE- Paint a thin layer of RED, WHITE, or BLUE paint on each star. Let dry. After the first coat is dry go back and add a second layer of paint on each of the three stars. Let dry.

TWO- Once your stars are completely dry use your sandpaper to distress them. Focus on the edges, corners and lightly on the front/back of each wood star. I use 100-150 grit sandpaper when sanding these by hand. If I use my orbit sander I use 120 grit.

THREE- Use a lint free cloth to remove all the dust from sanding the wood stars. You can finish them off with a polycrylic spray or wax. I didn’t use antiquing wax on these but if you wanted to make them extra rustic try using these techniques for dark wax.

DIY mini Easter wooden tags

MAKE YOUR OWN RUSTIC WOOD TAGS FOR EASTER

DIY mini wood tags for Easter. How to use your Cricut to make wood signs for Easter. Make your own farmhouse tray mini signs for spring.

I can’t believe how popular these little wood tags for Easter are! I keep selling out of this spring DIY craft kit almost daily. Since the entire country is basically on lockdown this kit is giving people a much needed creative outlet. I am SO happy to be able to provide this joy to so many around our nation, especially at a time like this.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

In this crafty tutorial I’m going to show you how to stencil these wood tags for Easter. If you’re wanting a tutorial on how to cut wood tags you’ll want to go here. I share the measurements, angles, and even the drill bit size to make the twine hole in the middle.

DIY RUSTIC WOOD TAGS FOR EASTER

Here’s what you’ll need

• mini wood tags (you can buy these precut tags if you don’t have the tools to cut them yourself)

• stencil material

• transfer tape

• acrylic paints - gray, pink, yellow, blue, white

• sandpaper

• paint brush

• stenciling sponge

• twine

• masking tape

• vinyl squeegee

• CRICUT SVG for hangin’ with my peeps —> CLICK HERE

• free SVG for bunny image & happy Easter —-> CLICK HERE

Other helpful tools I used

• Ryobi miter saw

• Ryobi sander

• Cricut Explore (you can create AMAZING projects with an older model Cricut like this)

• Cricut Access

• Cricut cutting mat

If you love these rustic wood spring tags be sure to check out this super easy Dollar Tree moss bunny craft.

Cutting your wood pieces

1. First you want to cut out your wood tags. I used my Ryobi miter saw to do this. Cut a 1x4 in to 3 5” long pieces. On the top of each 5” piece measure in 1” and make a mark. Set your miter saw to 45 degrees, line it up with your 1” mark and cut. Flip your tag over and do the same to the other side. 

2. Now drill a hole in the middle of the top of each piece. This is for your twine holder to go through.

3. After you have that done give each piece a quick sanding. You don’t have to get crazy with this, it’s not a fine piece of furniture. I use 120 grit sandpaper for this and that’s it. Just enough to take off that shine it has when you get it from the lumberyard.

   WATCH THE VIDEO OF HOW I MADE THESE USING MY MITER SAW

Stencils

You can use any cutting machine to create your Easter themed stencils. I use my Cricut Explore to make all of mine. If you have and are using a Cricut you can get the HANGIN’ WITH MY PEEPS image to use here. You can use my FREE SVG’s for the bunny image & happy Easter cutting files here. I use Oramask stenciling film to make my stencils. While it is a little more expensive than other materials I have found it works the absolute best for stenciling.

Painting (the fun part!)

First a thin layer of gray paint on each wood tag. Be sure it is a thin layer, you will still be able to see the wood grain through the paint. After the first thin layer is dry you can paint a second thin layer. You don’t want more than two layers of base paint on your wooden tags, or any painted wood sign. Too much paint will cause issues when stenciling with base paint peel up, which can be impossible to fix sometimes and honestly it just plain sucks to have to go back and fix.

2. After your base paint is completely dry you can apply your stencils to all three wood blanks. Apply your transfer tape to your stencils (if you bought my DIY CRAFT KIT this step has already been done for you). Peel the paper backing from your stencil/transfer tape. Go slow.  Place your stencils sticky side down on the front of your painted wood tag. The front is just whichever side you prefer best ;). Using your vinyl squeegee, if you don’t have one you can use a plastic store rewards card, and rub the stencil to that it adheres to the wood. Slowly peel the transfer tape away from the wood leaving your stencil attached to the wood. I find that it works best when I roll the transfer tape away, check out this DIY PAINTED WOOD SIGN TUTORIAL for  a closer look at how to do this.

3. Use masking tape to tape off the edges of your stencil so you don’t get paint on areas of the wood tags that you don’t want paint on.

4. Using one end of one of the sponges dip it in the white paint. You need very little paint, the more paint you use the more paint bleed you will likely have. Dab your sponge onto the exposed areas of your stencil. The coverage should be VERY faint. Let that dry and repeat up to three times. You don’t want to apply more than three coats as this could cause issues with paint peel up where you just stenciled. If you want the cute little bunnies to be different colors paint them white first then finish them with two layers of your preferred paint color. I painted mine in pink, blue, and yellow. Giving them a white base first will allow the colors to really pop if you are painting on a dark base.

5. Peel up your stencils and tape. Using an xacto knife helps to remove the middle piece of the stencils.

Distressing

After your paint completely dries from stenciling you can start distressing your wood Easter tags. I LOVE this technique because it’s super easy and quick. Using sand paper or your sander give a quick sanding to the edges, corners, and lightly on the front of each wooden tag. Wipe off and dust.

Adding twine

Probably the easiest step is adding the twine. Decide how long you would like your twine hangers to be. I think I measured mine at 12” or so. You’ll need 3 pieces, one for each wood tag. Feed one piece of twine through the hole in one of the wood tags then tie it in a knot.

You’re ready to display your Easter wood tags in your home. I know it may seem like a lot of steps written out but really these are super easy and quick to DIY once you get going on them.

Like with all of my DIY tutorials if you have any questions please reach out. Leave a comment below or send me a message on one of my social media pages. You can find my links at the top.

Happy Crafting!

DIY easy wood tags using your miter saw

How to make farmhouse style wood tags using your miter saw

These little tags are SOOOOOO easy to make! If you can operate a miter saw then you can make these wood tags. They tie in perfectly with farmhouse décor and make adorable accent pieces to those tiered trays that are all over Pinterest. And you can make your own for a fraction of the cost! Even cheaper if you are using scrap wood like I like to do when I make little projects for my home.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

This tutorial is quick. Like less than 2 minutes kind of quick if you watch the video tutorial over on my YouTube channel. Check it out below or keep scrolling for the written tutorial.

After you’re done reading this DIY go see what I did with these wood tags for St. Patrick’s Day

Here’s what you need to make your own rustic wood tags

• 1x4 piece of lumber

• measuring tape

• pencil

• Ryobi miter saw

• Ryobi sander

• 120 grit sandpaper

• Ryobi drill

• Ryobi drill bits

Can you tell I LOVE my Ryobi tools?! Seriously though, if you are having trouble deciding what kind of tools you need as a craft you need to read this post about POWER TOOLS FOR CRAFTERS. In it I cover the basics of what you need and explain a little about them.

Easy wood tags for your country chic decor

ONE-

The first thing you need to do is measure out your 1x4 and cut it at 5”. I just used my miter saw side ruler for this. I made mine in a set of 3 but you can make as many as you’d like.

TWO-

Swivel your miter saw so that it is set at 45 degrees. Be sure it locks in place, I extra lock mine in place using the manual lock on my saw.

THREE-

On the top right hand side of each tag measure in 1” and put a little mark. So that you don’t have to mess with moving your angle to cut on the other side flip your piece of wood over and make a mark 1” on the other side.

FOUR-

Line your laser up with that 1” dot you made and cut. If you don’t have a laser on your saw you can line your blade up while it’s not in motion. Side note…I’ve really glad I splurged for this fancier saw to make projects like this even easier. I almost didn’t get it just to save a few dollars but some things are worth every penny, just like this saw ;)!!

FIVE-

Flip your wood tag over and do the same thing to the other corner. Isn’t that so much easier than moving the degree of the blade?!

SIX-

To make a hole in the top for a piece of twine to go through you just need to drill a hole large enough for the size twine you’re using. I used a 5/8” drill bit to drill mine. I measured in 1.75” from one side, not where I cut the corner off because that would not give an accurate middle mark. Tip- place a scrap piece of wood under the wood that you’re drilling to save the surface underneath from getting damaged.

SEVEN-

Last, finish them off by giving them a quick sanding. I don’t ever get too crazy with this step on my projects. I typically just use 120 grit sandpaper all over and call it a day.

That’s it! SUPER EASY miter saw craft. As with all of my posts if you have any question please feel free to reach out and ask away.

DIY mini St. Patrick's Day wood tags

DIY MINI WOOD TAGS FOR ST. PATRICK’S DAY

If you’ve been reading my blog you might know that my four daughters have been asking me to decorate more for the holidays…including St. Patrick’s Day decorations. Yes, that is a holiday they think I should decorate for too lol! So they win. I’ve truly been making an effort to have a more festive home even though daughter #4 totally rearranges everything.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I have been eyeing these adorable mini wood tags on Pinterest for forever now. They are CUTE! They tie in with pretty much anything. You can add these wood tags to a wreath, to a welcome sign, on the mantle (I really wish we had one but I’ll just have to make a faux mantle one of these days) or my favorite- to a tiered tray. Those trays are seriously rustic home décor overload! I love them!! I need to add one to my coffee bar soon.

If you’re looking for fun green holiday themed to make with the kiddos try this easy St. Patrick’s Day suncatcher.

To make this completely from scratch at home you’ll need a few power tools. But, if you don’t have power tools to DIY this craft from start to finish you can grab a DIY CRAFT KIT here. I haven’t always been super comfortable using power tools, actually I was deathly afraid of them not too long ago. Now that I’m over my power tool phobia here’s what I recommend for DIY crafters.

DIY St. Patrick’s Day Wood Tags

Here’s what you’ll need

• mini wood tags

• stencil material

• transfer tape

• white paint

• 3 shades of green paint

• sandpaper

• antiquing wax

• chip brush

• paint brush

• stenciling sponge

• twine

• masking tape

• vinyl squeegee

• CRICUT FILE- four leaf clover

If you’d like the same file I used to create this set of 3 mini wood St. Patrick’s Day tags you can get my Cricut file here. It’s in my FREE resource library. It’s where I keep all of my FREEBIES like files, printables, patterns, and more. You’ll need the password because I like to keep it a little bit secret but no worries it’s super easy to get. Jut fill out the prompt and you'll get instant access.

Other helpful tools I used

• Ryobi miter saw

• Ryobi sander

• Cricut cutting machine

• Cricut Access

• Cricut cutting mat

Watch the video or keep scrolling for step by step written/photo instructions for these wood St. Patrick’s Day tags.

Cutting your wood pieces

1. First you want to cut out your wood tags. I used my Ryobi miter saw to do this. Cut a 1x4 in to 3 5” long pieces. On the top of each 5” piece measure in 1” and make a mark. Set your miter saw to 45 degrees, line it up with your 1” mark and cut. Flip your tag over and do the same to the other side.

2. Now drill a hole in the middle of the top of each piece. This is for your twine holder to go through.

3. After you have that done give each piece a quick sanding. You don’t have to get crazy with this, it’s not a fine piece of furniture. I use 120 grit sandpaper for this and that’s it. Just enough to take off that shine it has when you get it from the lumberyard.

   WATCH THE VIDEO OF HOW I MADE THESE USING MY MITER SAW

Stencils

You can use any cutting machine to create your stencils. I use my Cricut Explore to make all of mine. If you use a Cricut you can get my cutting file here. I use Oramask stenciling film to make my stencils. While it is a little more expensive than other materials I have found it works the absolute best for stenciling.

Painting (the fun part!)

1. First a thin layer of white paint on each wood tag. Be sure it is a thin layer, you will still be able to see the wood grain through the paint. After the first thin layer is dry you can paint a second thin layer. You don’t want more than two layer of base paint on your wooden tags, or any painted wood sign. Too much paint will cause issues when stenciling with base paint peel up, which can be impossible to fix sometimes and honestly it just plain sucks to have to go back and fix.

2. After your base paint is completely dry you can apply your stencils to all three wood blanks. Apply your transfer tape to your stencils (if you bought my DIY CRAFT KIT this step has already been done for you). Peel the paper backing from your stencil/transfer tape. Go slow. Place your stencils sticky side down on the front of your painted wood tag. The front is just whichever side you prefer best ;). Using your vinyl squeegee, if you don’t have one you can use a plastic store rewards card, and rub the stencil to that it adheres to the wood. Slowly peel the transfer tape away from the wood leaving your stencil attached to the wood. I find that it works best when I roll the transfer tape away, check out this DIY PAINTED WOOD SIGN TUTORIAL for a closer look at how to do this.

3. Use masking tape to tape off the edges of your stencil so you don’t get paint on areas of the wood tags that you don’t want paint on.

4. Cut your stenciling sponge in half so you can use it in all three paint colors without mixing the colors.

5. Using one end of one of the sponges dip it in the lightest color of green. You need very little paint, the more paint you use the more paint bleed you will likely have. Dab your sponge onto one of your wood blocks where the clover is exposed on the wood. The coverage should be VERY faint. Let that dry and repeat up to three times. You don’t want to apply more than three coats as this could cause issues with paint peel up where you just stenciled.

6. Peel up your stencil and tape. Using an xacto knife helps to remove the middle piece of the clover.

7. Repeat steps 5 & 6 for your other two wood tag bases.

8. Let them dry.

Distressing

After your paint completely dries from stenciling you can start distressing your wood St. Patrick’s Day tags. I LOVE using antiquing wax for this process. Antiquing wax comes in a several different colors but my favorite its definitely the regular antiquing wax. Learn more about how to transform your DIY farmhouse style crafts with antiquing wax.

1. Using sand paper or your sander give a quick sanding to the edges, corners, and lightly on the front of each wooden tag. Wipe off and dust.

2. Take your chip brush and lightly dip it into your antiquing wax. Dab off the excess, a little wax goes a very long way. Much like you did with the sandpaper, focus on brushing the wax on the edges, corners, and lightly on the front of your wooden tags.

Adding twine

Probably the easiest step is adding the twine. Decide how long you would like your twine hangers to be. I think I measured mine at 12” or so. You’ll need 3 pieces, one for each wood tag. Feed one piece of twine through the hole in one of the wood tags then tie it in a knot.

You’re ready to display your St. Patrick’s Day wood tags in your home. I know it may seem like a lot of steps written out but really these are super easy and quick to DIY once you get going on them.

Like with all of my DIY tutorials if you have any questions please reach out. Leave a comment below or send me a message on one of my social media pages. You can find my links at the top.

Happy Crafting!

Do you love freebies? Don’t forget to check out my FREE RESOURCE LIBRARY. It’s where I keep all of my FREE printables, files, and more. Go here to get instant access to my library

DIY CRAFT KIT how to paint your free standing BOO wood cutouts

How to paint your DIY CRAFT KIT, BOO WOOD CUTOUTS

I just love these little wood cutouts. They are so adorable and tie in perfectly with our simple Halloween décor. I primarily decorate for fall but I do like to add touches of Halloween to our decorations because I have little kiddos and they LOVE the Halloween stuff far more than the traditional fall décor. So we compromise and get the best of both worlds.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

If you love this DIY CRAFT KIT check out another popular fall craft kit, DIY FREE STANDING PUMPKINS

Don’t feel like reading the tutorial? No worries I have a short video tutorial on my YouTube channel. Scroll to the bottom to catch it or click here to view the HOW TO PAINT YOUR CRAFT KIT, DIY BOO WOOD CUTOUTS

If you need a CRAFT KIT you can order yours here —-> DIY CRAFT KIT BOO WOOD CUTOUTS FOR HALLOWEEN

If you want to make yours from scratch check out this post on how to make your own BOO WOOD CUTOUTS using a Cricut cutting machine and a Ryobi scroll saw. I show you exactly how I make my BOO cutout sets and if you have the tools you can make your own too! There’s even a video tutorial at the end ;)!

How to paint your BOO wood cutouts

If you didn’t but the DIY CRAFT KIT here’s what you’ll need

• WOOD CUTOUTS

• MIDDLE CUTOUT PIECES

• PAINT BRUSHES OR FOAM BRUSHES

• BLACK ACRYLIC PAINT

• WHITE ACRYLIC PAINT

• PENCIL

---

Real quick…if you have ever wanted to learn how to paint wood signs, the way the PROs do, you don’t want to miss my complete guide to sign painting. It is a whole course that you complete on your time. I am teaching you EVERYTHING I know without you having to go through the headache and expense of trial and error. If you’ve struggled with paint bleed, designs not lining up, paint peel up, sticky residue left behind you are in for a treat! Click on the image below or go here for more info.

---

First you want to decide if you want to paint white or black letters. Heck, you could even mix it up and do both! I chose to do white ghosts but I wanted black distressing on my cutouts. There are lots of different ways to achieve this look but my favorite is to paint the distressing color first then paint my project whatever color I want it to actually be.

So on these BOO cutouts I first painted them with a SUPER thin layer of black paint {remember this is going to be the underneath/distressed color}.

After the underneath color is dry you can paint your wood cutouts the actual color you want them to be.

Some important things to know:

• use a VERY LIGHT hand when painting the top color. You do not want to press hard as this will put too much paint on your wood cutouts and it is far easier to add more paint than it is to take too much paint off.

• do NOT get your brush wet. For almost all of my paint projects I always use a DRY brush.

• use very little paint, dab off excess paint before applying

• work from the middle out

• paint lightly around the edges as this is where the “natural” wear would be

• if you need a little more coverage wait till your paint is dry then add more paint

Paint all sides of each cutout this way.

Trace around your cardstock cutouts. You will have a total of 5 - 2 cutouts for the letter B and 3 cutouts for the ghosts {you will reuse the ghost cutouts for both ghosts}. Place them where they need to go on your cutouts then trace around them with a pencil. This does not have to be perfect ;)!

Using a fine paintbrush paint inside the traced lines with the same colored paint you used for your distressing color. I used black for my distressing color so I also used black for areas I traced around.

And then you’re done! If you have sandpaper on hand you can lightly give it a little more distressing but that is totally up to you.

Click here to shop even more DIY CRAFT KITS

Check out the full video tutorial

If you have any questions about your DIY CRAFT KIT please leave a comment below or feel free to send me a message. If you purchased through my Etsy shop please message via their platform to stay in compliance with Etsy’s policy.

DIY free standing BOO cutouts using your Cricut & scroll saw

DIY- use your CRICUT to make BOO wood cutouts for Halloween

I don’t have the latest fancy Cricut Maker, but that doesn’t mean I still can’t create AMAZING projects with my older model, CRICUT EXPLORE. Especially when use it with my Ryobi scroll saw…pure magic happens! Ok, obviously not real magic but the projects you can create with this combo is everything to write home about!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I wanted to add another DIY craft kit to my crafty line up for my online business and thought these BOO cutouts would fit in perfectly with the craft kits I already offer.

If you don’t have the tools to make your own BOO cutouts grab your own

—-> BOO DIY CRAFT KIT <——

After you read this tutorial check out how I finished my own BOO WOOD CUTOUTS

Here’s what you’ll need to cut out your own Halloween BOO wood letters

• CRICUT EXPLORE AIR

• CRICUT CUTTING MAT

• CRICUT ACCESS in CRICUT DESIGN SPACE

• RYOBI SCROLL SAW

• RYOBI SANDER

• RYOBI MITER SAW

• 120 GRIT SANDPAPER

• PINE WOOD {I used a scrap piece}

• PENCIL

• CARDSTOCK

Don’t feel like reading the tutorial? Catch the video below or click here for the DIY BOO cutouts tutorial using your Cricut & scroll saw

---

Join the crafty community. Get exclusive offers, content, and more

---

First, design your BOO in Cricut Design Space. I used the font beefcake for the letter “B”. I used a ghost image in DS {design space} that is included in my Cricut Access monthly subscription plan. It had arms but I took those away using the slice function. I resized them too fit the piece of wood I was using so mine are 6”x3.25”.

Next, cut them out on cardstock. I used some scrap cardstock that I had leftover from a previous DIY project. After I started cutting them I realized that I really didn’t need to cut out two ghosts. So really you just need 1 letter B and 1 ghost. Don’t toss the middles of the ghost or B, you’ll need those for later when you paint them.

Now trace around your cutouts using a pencil onto your wood. I have TONS of scrap wood so I used a scrap piece that I had on hand. I used a 1” pine board that you can find at most home improvement stores. Check out the DIY SCRAP WOOD PUMPKINS I made using this same method. They turned out SO CUTE!!

You don’t need to trace around the middle cutouts because we won’t be cutting those pieces out. Remember to trace around your ghost twice ;)

After you have your Cricut cutouts traced it’s time to cut them out using your Ryobi scroll saw. If you don’t have a scroll saw you can use a band saw and maybe even a jigsaw but I’ve had great luck with cutting things out on my scroll saw so for now that’s what I’m sticking with.

Once you have them all cut out you’ll want them to be able to stand on their own. I used my miter saw to do this. My miter has a laser on it making it SUPER easy to line things up and to show me exactly how much I’m taking off. By cutting a sliver off the bottom with your miter saw you get a nice straight base so your projects are able to stand freely on their own.

SIDE NOTE: if you’re thinking about investing in a set of your own power tools you’ll want to read this WHAT ARE THE BEST POWER TOOLS FOR CRAFTERS. It wasn’t that long ago when I had some serious anxiety about using power tools so I wrote a little about that and why I’ve chosen the tools I have for my crafty projects and business.

Then just give them a quick sanding and you’re ready to paint them. I always use a 120 grit sandpaper and most of the time I don’t sand my projects to a super smooth finish. A little bit of bumps and divots just add to the rustic look ;)!!

There are so many projects you can do when you start pairing your tools together. Like this DIY MERMAID CUPCAKE STAND I made for my daughter’s birthday party this year. And a bonus is that she has a pretty awesome new room decoration she was able to decoration then hang in her bedroom after the party was over.

Check out the DIY BOO cutouts using your Cricut & scroll saw video tutorial below

COMING SOON…a complete guide to paint wood signs without the stress and headache of trial and error. Click here for more info

DIY hanging wood flag

I love patriotic décor. Not only because I truly love being an American but because it never goes out of season! You can leave it up year round and it looks perfectly beautiful and not at all out of place, unlike the wooden Santa I had hanging out in the living room five months after Christmas. Yes, that’s a true story! My grandma painted this amazing 5 ft tall Santa ages ago and I somehow overlooked him for months in our living room.

So unlike Mr. Claus, patriotic décor would not stick out like a sore thumb long after Independence Day has passed.

If you don’t have time to make your own be sure to stop by my Etsy shop and purchase your own handmade wood American Flag made by yours truly ;)

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Ok, on to the tutorial.

Here’s what you’ll need

SUPPLIES

• 3- 1x4x12 {white and red pieces}

• 1- 1x4x13 {blue piece, top}

• 1” paint brushes

• Acrylic paint, red, blue, white

• baler wire {you can find this at a local farm store}

• 3 wood stars

• chip brush

• antiquing wax

• 120 grit sandpaper

TOOLS

• RYOBI Drill

• RYOBI Drill bits

• RYOBI Sander

• needle nose pliers

• wire cutters

After you cut down your 1x4 into the correct sizes you need to give them a quick sanding. I use my Ryobi handheld cordless sander for this but you can use just sandpaper or a sanding block, although it will take a lot more work and more time. I purchased my sander fairy cheap at my local hardware store, one of the best $50 I’ve ever spent! After you have all the 1x4 pieces sanded give them a quick wipe down to get all the saw dust off.

Next you need to paint all the wood pieces and the stars. I only did two coats on each piece. To get the look that I did on mine you will need to paint all three stars WHITE, 2 of the 1x4x12’s WHITE , 1 of the 1x4x12 RED, and the 1x4x13 BLUE. Let them dry COMPLETELY between coats.

After everything is totally dry you need to mark your pieces where you will drill your holes. I am not a perfectionist so I just eyeball it. It’s rustic so it doesn’t have to be perfect anyway ;) I do this with a pen but if you’re worried about messing up you can use a pencil.

Not counting the stars, your pieces should have a total of 11 markings, 3 on the top of the blue piece where you will attach the stars, 3 on the bottom of the blue piece where you will attach the hanging white and red pieces, 1 on the top right of the blue piece and 1 on the top left of the blue piece where you will attach the baler wire to hang for displaying, 1 in the top middle of each white piece, 1 in the top middle of the red piece. I don’t typically mark the stars because it’s not necessary, the hole goes in the top of the star.

Now it’s time to drill. Your drill bit will vary depending on how thick your baler wire is. I always use a drill bit that is just a size above the wire size, that way the wire has room to move so that it’s not super tight. Be sure when you are drilling the holes in the stars you don’t get too close to the top. If you get too close you will crack the tip of the star and you won’t be able to use it. PRO TIP: place a flat discarded piece of wood under what you’re drilling into so you don’t drill into the table underneath.

Now it’s time to distress. Using your Ryobi sander sand around the edges. Here’s a good example on how I do this in my Dr. Seuss keepsake craft. There are some good close ups on sanding just the edges and rounding the corners of the wood to give it a perfect rustic look.

I only sand the 1x4 pieces. The stars are so small and fragile that yo don’t need to sand those, using the wax on them in the next step will work just fine.

Apply wax around all the edges, corners, and give them a light coat down the center of each piece. Check out my DIY rustic wooden pumpkins post on a more detailed way to do this using your chip brush. I love pretty much any brand of antiquing wax, they all work great! PRO TIP: cut the bristles down on your chip brush. You get a better outcome when the bristles are shorter and stiffer.

You’re almost done! The next steps are just assembling your pieces together. You’ll need your baler wire and wire cutters for this.

You’ll need 3 wire pieces cut to approx. 6”-7”. Cut your pieces short if you want less space from the blue piece to the hanging pieces, and longer if you want more space from the blue piece to the hanging pieces. Now make a loop with your plies on ONE end of each piece like pictured below.

These loops will go on the BACK of each piece.

Then connect it to the blue piece and loop the end just like you did before. This is what the BACK of your flag should look like before you attach your stars.

The star wire is slightly different. You’ll need a 3” piece for each star. One end you need to wrap a few times around your needle nose pliers. This doesn’t have to be perfect, mine never are. Leave the other end open.

Then feed the straight end of the wire through the front of your star then through the front of the boar where you drilled a star hole.

After you put your star wires through their holes on the blue wood you want to do the same thing and loop them on the back like you did with the other wires. Pictured below is BEFORE they are looped.

Add a piece of wire to hang at the top corner holes and you’re done! I know it seems like a lot of steps but it’s SUPER easy! I’d love to see pictures of your handmade patriotic decor, especially if you make this piece:)!!

DIY wall sconce using 1x4's

How to make a pallet style wall sconce

I've always had a LOVE for the farmhouse style...even before it was a thing...so I am so excited that others are appreciating the simple and rustic look!  I've never been one to got out and spend a ton of money to redecorate, I was raised to use what you have or get creative and make something from things you have on hand or need to buy little supplies for {which is what lit our flame for our business}. 

I've had my eye on these mason jar holders for awhile now...almost 2 years! And I finally made time to create my very own. I knew they would be super easy but seriously I am kicking myself for not making them sooner. One of the easiest and quickest DIY's I've done in awhile. In less than an hour you can have your own set of hanging pallet mason jar holders too!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

If you like this pallet style décor check out my hanging flag wall décor diy tutorial.

Materials you'll need to make 1 PALLET STYLE WALL SCONCE

• 1X4X8

• Ryobi Miter Saw

• RYOBI Sander

• Ryobi Brad Nailer

• 1 1/4" brad nails

• Gorilla Glue Wood Glue

• 120 grit sandpaper

• 2 lint free rags

• Rustoleum Stain

• Large cup hook

• Pint sized mason jar

• mason jar hanger

STEP 1

Cut your 1x4x8 into 5 pieces.

3- 1x4x18

2- 1x4x10.5

{If you're making a set you will need to cut double the pieces}

STEP 2

Give al the pieces a quick sanding to knock down all the unclean edges. This will make applying the stain MUCH easier.

STEP 3

Stain your pieces. If you are painting them you can wait to do this till you have put your pieces together.

-I highly recommend Rustoleum stain especially this weathered gray I used on this piece.

STEP 4

I recommend sanding your pieces before you attach them together. You can use a sanding block or regular 120 grit sand paper but I prefer to use my Ryobi cordless sander. It's quick and does a GREAT job! Be sure to wipe your boards down with a lint free rag after sanding to get all the sawdust off.

STEP 5

Place your 18" pieces evenly in a row. Be sure you are happy with their placement.

STEP 6

Once you have your boards laid out how you like them take the 10.5" boards and run a bead of Gorilla Wood Glue down one of the sides. You will place it glue side down onto your 18" boards width wide {so you will have a 10.5" board going along the top and another 10.5" board going along the bottom}.

STEP 7

Now you will use your Ryobi Brad Nailer to nail them in place. This will give them the stability to last for years to come

If you don't have a brad nailer you can use a hammer and nail. It won't be as quick but it will get the job done. 

STEP 8

 Add a cup hook to the top middle of your board. To make it easy you might want to drill a small pilot hole to get it started. Be sure it's under the 10.5" piece, hang your mason jar and you're done!

It may seem like a lot of steps but I assure you this is an EASY PEASY project to give your décor some sprucing up!

---

What are the best power tools for crafters?

Read about the power tools that are a crafter’s must have.