DIY scrap wood picture holder - no fuss quick and easy to make

Needing a quick & easy picture holder using reclaimed wood? This DIY craft might be what you are looking for.

Impact-Site-Verification: 99a15790-1f3a-44b3-ba5a-bb281f07e613

This scrap wood picture holder was insanely easy to make. While I love painting there was no painting, no drying times, no staining, literally no fuss! I had it up and holding pictures within minutes.

I’ve been redecorating our master bedroom on a shoe string budget. From the paint to the décor my goal is to spend less than $100 to redo our bedroom. This DIY craft most definitely fits into the budget since I only had to pay for the photo prints (they were a whopping .09 a piece).

I can’t wait to get our room all finished up and show you guys how it turns out but for now I will show you the DIY picture holder I made to go along with the rest of my frugal décor in our room.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

—-> Check out more scrap wood projects, click here <—-

Here’s what you need to make your own DIY RECLAIMED WOOD PICTURE FRAME HOLDER

• a piece of reclaimed wood

• clips like these (I got mine from the Dollar Tree in the office supplies section)

• hammer

• hanging hardware of choice

Click here to learn how to attach a sawtooth hanger. It’s super simple especially if you have a piece of painter’s tape.

1.GATHER MATERIALS

I didn’t have any sawtooth hangers so I used some fancy picture hanging hardware and it required a drill.

2. LAY OUT YOUR PHOTOS

To be sure I had the spacing right I laid my 4x6 photos out on my reclaimed wood. I just eyeballed this but if you want yours to be perfect and exact you can use your tape measure to perfect your spacing.

3. HAMMER IN THE CLIPS

The clips I used already had nails attached to them. They were a little difficult to hammer in to the wood though. I am fairly certain, since the clips I used were in the office department of the store, that they were made to push into a cork board and not wood. But hey, it worked!

4. ATTACH HANGING HARDWARE

If you need a visual on how to attach a sawtooth hanger check out this post. I used my Ryobi drill to screw in my hardware but a drill isn’t completely necessary, a screwdriver will work too it’s just not as quick and easy.

5. ADD YOUR PICTURES & HANG ON THE WALL

This reclaimed wood photo holder is going in our master bedroom so I tried to choose photos that were good ones of both my husband and myself.

I hope you found this tutorial both simple and motivating to use up some scrap pieces of wood that you may have lying around. Let me know if you have any questions in the comments below.

Check out more posts below. Happy Crafting!

Rusty old metal cabinet / locker turned mudroom shoe storage

$20 vintage locker repurposed for the sunporch / mudroom

Antique stores have the best finds! I scored a gorgeous old metal locker / metal cabinet at my local antique shop last week. I wasn’t sure exactly what I was going to do with but after seeing it’s $20 price tag I knew it had to come home with me.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I took the tag inside, paid for it, then loaded it up in our brand new to us fancy minivan (literally the nicest car we’ve ever owned and I still can’t believe it’s ours!!). Thank goodness I had just put this cargo liner blanket thing in there so it kept my van from getting gross stuff all over it or scratched up. Three of the four daughters were excited about our new find but one of them…not so much lol!

A week after bringing it home I finally had time to do something with it. I decided I was going to turn it into a muddy boot/shoe holder for our sunporch / mudroom. Oh my goodness it turned out so freaking cute!

I have seen others paint their metal cabinets / lockers that look like this but honestly I loved everything about this piece as is. I didn’t want to scrape off any of the old paint or add anything to it. I thought it was perfect just the way it was. The only thing I did to it was remove the door and clean it up a bit.

It was full of crunchy old leaves, spiderwebs, and lots of dirt, rust, and chipped paint. I used my vacuum to get all of that out of there. I didn’t see a need to wipe it down with any spray cleaning agent. I mean, after all it will be holding shoes that have just stomped through a chicken coop.

With just a light cleaning this metal cabinet looked a million times better. I did vacuum off the big chipped paint spots. I figured those will end up falling off anyway soon from putting shoes in there.

The legs on this piece were in pretty good shape but because our sunporch slants down for drainage the cabinet sat lopsided. To fix that I put a small piece of scrap wood under two of the feet. That worked great!

On one of the shelves I added a bucket to store bug spray and sunscreen. It took me forever to find a piece of chalk so I could write sunscreen & bug spray on the front of that lol! Oh the mom life, gotta love it! Next to that I put a wire basket and filled it with the bubbles and jump ropes that the girls got for Easter. If you need a cheap Easter craft for your rustic home decor check out this adorable moss bunny sign I made this year.

I don’t think I could have found a more perfect shoe holder for this space. It’s unique and beautifully imperfect just like our family.

Let me know if you have any questions in the comments below.

Interchangeable Christmas pallet sign

INTERCHANGEABLE WINTER PALLET SIGN

I love decorating for the holidays. Especially Christmas. Now that I have a bigger home to decorate I’m finding it a little challenging to do AND keep it in budget. I have always had the heart of a frugal women so spending an arm and a leg to put up Christmas décor just wasn’t happening.

That’s why in the fall I made this lightweight faux pallet sign. It’s a blank pallet style sign that I can change out with the seasons. It’s a big statement type piece that I prop up on my dining room hutch. I love this so much. Best of all the planks I used to make this sign were left over from this plank wall project.

I really tried hard to spend minimal funds for Christmas decorating. So, for Christmas I had this great idea to make stars from twigs I had in the backyard. And they turned out so cute! I want to make more!!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I made 2 smaller twig stars and 1 medium sized star. You can see how I made my twig stars click here.

I was so glad I snagged up a package of silver bells from the Dollar Tree prior to making this craft because without them I don’t think it would have turned out so cute or looked as festive for Christmas.

Here’s what I used

• 3 twig stars

• pallet sign

• jute

• 2 silver bells (these are similar to what I used)

• pushpins

• scissors

1. PLACE THE DECORATIONS

The first thing I did was place my twig stars and bells on my pallet sign to see where I wanted them.

2. MEASURE

Next I measured out how much jute I would need to hang my decorations from the backside of my sign. I doubled the amount of jute since I was looping it and hanging it from the backside.

3. ADD THE JUTE

The stars were easy to add the jute to. I just fed the jute through the top of each twig star. The bells were a little more difficult. I wanted to see the snowflakes that were on the bottom side of the bells so I had to hang them sideways.

I fed the jute through one side of the bell and then out the other side and tied the two ends of the jute together.

4. HANG

I hung my twig stars and silver bells from the backside of my pallet sign. I just kina eyeballed where I wanted them to be. Placed a pushpin there and pushed it in as far as I could get it.

Then I looped where I had tied the jute ends together around the pushpin and draped it over to the front side of the pallet sign.

I prop my pallet sign up on my dining room hutch, which one day I need to make time to give a makeover and I will most definitely post the before and after for you to see on here:)!!

Happy crafting!

Check out more below

Easy Christmas stars from twigs

CHRISTMAS STARS MADE FROM TWIGS- EASY TUTORIAL

Have you made stars from twigs? This Christmas decoration was super quick, easy, and best of all basically FREE!

If you’ve read any of my content you know how I love a good frugal DIY craft. Especially during the holidays when finances can be a little tighter. Like this easy and incredibly inexpensive Christmas tree I spruced up. I fits in perfectly with my rustic décor.

If you have access to twigs, a glue gun, and some jute/bakers twine you can make this twig star Christmas craft.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

HOW TO MAKE CHRISTMAS STARS FROM TWIGS

Here’s what you need

• skinny twigs

• bakers twine or jute

• glue gun

• hot glue sticks

• scissors

• wire cutters (this is similar to what I used but you can use garden snips)

1. GATHER TWIGS

If you don’t have a yard to gather twigs from, or if you don’t have trees in your yard, take a stroll through the local park and you will most definitely find enough twigs to use.

For these mini stars you’ll want to find twigs that are thin, not thick.

2. CUT

I used wire cutters for this step but garden snips will work too.

I cut 4 pieces of twigs that were the same size and 1 piece that was about 2/3 or so the size of longer twigs. I just eyeballed this, it doesn’t have to be exact.

3. MAKE A STAR

Just like when you were a kid making stars that’s exactly how you are going to make these stars.

Make an upside-down V.

Then make an X with the other two long pieces.

Then put the smallest twig going across the top.

I had to carefully move them around till I was happy with the placement of my twig star.

4. GLUE

I had already preheated my glue gun prior to this step so it would be ready when I was. I added a SMALL DAB of hot glue wherever the twigs touched. You don’t want a ton of glue, just enough to keep it in place for now.

5. WRAP

After my glue was dry I wrapped each star point in a silver and white bakers twine. I added a tiny drop of glue then put the end of my bakers twine on it till it was dry.

Then I wrapped the end till I was happy with how it looked.

Then I cut the bakers twine and added another tiny drop of glue to hold it in place.

That’s it. Nothing crazy complicated. I will warn ya, it can get a little frustrating if your kiddos are yelling at one another in the other room and your twigs keep moving out of place from the slightest touch lol! That totally happened a few times to me when I was making these stars for my frugal Christmas décor.

I hope you enjoyed this crafty tutorial. If you have any questions please leave them in the comments below.

Happy Crafting!

Check out more DIY crafts below

Classic farmhouse tiered tray signs

Tiered tray sign bundle for your CLASSIC looking farmhouse decor

I am loving this tiered tray decor that’s all the rage right now. There are so many different seasons, holidays, and themes you can do. Or you can keep it super classy and simple with the classic black and white farmhouse colors. There is so much you can do with these simple color scheme. You can keep it black and white or add a couple rustic pieces that will give it a pop of color here and there. I love how versatile it is!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

If you LOVE this crafty post be sure to check out how I made a mini house family number sign. Instead of using vinyl like I did on these rustic farmhouse mini signs I painted it instead.

If you’re in to the rustic farmhouse style how can you not love a mini wooden tag that has farm animals on it?! This one is probably my favorite of all the bundled pieces. I absolutely LOVE chickens! Well of course cows and pigs too but chickens are really my favorite farm animal! Every time I see one, whether that be a real life chicken or a picture of one, I smile! They are just too cute!

TIERED TRAY RUSTIC SIGNS

For this tiered tray bundle I incorporated different sizes and shapes to these farmhouse pieces mix it up a bit. I typically create identical bases for my handmade sign pieces, like these hilarious rustic looking cactus signs. Another example are these Easter mini wood tags. They come in a set of 3 but they are all the same sized wood base. While they are super cute I am really loving the mix and match look of the different sized and styled bases of these classic farmhouse tiered tray signs.

Here are the sign bases I used:

• MINI ROLLING PIN

• MINI WOOD HOUSE

• MINI WOOD TAG

• MINI WOOD SIGN

Since they are all different sizes and shapes they truly work perfectly for the tiered tray signs.

Unlike most of my signs I actually chose to use vinyl on them instead of painting the entire design. I have been one BUSY momma this year so I’ve been adding more simple designs and styles to my shop line up. I guess I always thought using vinyl was “cheating” in the sign making game but I have no regrets using the vinyl on these designs. They are quick to make, priced at a more affordable price point, and I can get them out to my customers even faster because it takes SO much LESS time to create.

While stenciling designs will always be my preferred method for making signs I do love how these vinyled signs turned out. So much that I have plans to add even more in my shop!

You can grab the FARM FRESH design in my FREE RESOURCE LIBRARY.

Want your own set but don’t want to make them? You can purchase your handmade signs from my shop, click here —-> CLASSIC FARMHOUSE STYLE TIERED TRAY SIGNS

If you are a DIY-er and want to make your own rustic farmhouse style tiered tray signs here’s what I recommend you use.

• matte finish black vinyl

• transfer tape

• vinyl squeegee

• white paint

• mini rolling pins

• paint brush

• xacto knife

• sandpaper

• Cricut

• Cricut Design Space

• green Cricut cutting mat

• HOME SWEET HOME SVG

• FARM ANIMAL SVG

• OUR NEST SVG

• FARM FRESH SVG

New to Cricut? Check out these 10 must haves to get you started on your crafty journey

I don’t have a full on tutorial on how I made these signs they were really pretty simple to make since there wasn’t any stenciling involved. Stenciling is a WAY more involved process. But this process is super easy.

Here’s how I made my rustic tiered tray signs

1. Paint each wood base white. Let dry. Paint a second coat. Let dry.

2. Once dry distress the edges. Wipe with a dry lint free cloth.

3. Cut out your designs using your Cricut, or other cutting machine.

4. Weed your designs using your xacto knife.

5. Apply your transfer tape and remove paper backing from your designs.

6. Place your designs on your wood bases. Rub with your vinyl squeegee and remove your transfer tape.

7. Add any twine accents.

8. Place on your tiered tray and enjoy!

It’s really that simple! No messing with paint bleed. No fuss with drying time between stenciling paint coats. No stress about paint peel up. I really enjoyed how quick and easy these DIY mini wood signs were!

I hope you enjoyed this crafty tutorial. If you have any questions please feel free to ask in the comments section below.

Happy Crafting!

See how I make my mini wood tags. Don’t have the power tools to create the tags from scratch? Grab the unfinished wood tags here.

DIY Tiered Tray signs for 4th of July with Rae Dunn inspired SKINNY FONT

DIY 4TH OF JULY TIERED TRAY WOOD SIGN

RED, WHITE, AND BLUE rustic mini signs… yes!! Tiered tray signs are all the rage right now. If you’ve been on Pinterest, Etsy, or anywhere in between then you’ve definitely seen these little farmhouse looking beauties! They are usually made using a simple design and just tie in perfectly with the whole clean rustic look that’s in right now.

If you’re wanting to make your own mini wood signs it’s actually pretty easy to do. I make my tiered tray signs from 1x4’s that I cut down using my miter saw BUT even if you don’t have access to power tool you can still make your own mini wood signs! I’ve put together this DIY PATRIOTIC CRAFT KIT you can grab online in my shop. It comes with everything (except paint brushes) you need to make your own Independence Day signs at home. No need to go out and buy any fancy equipment or tools, especially if you don’t plan on making a ton of DIY craft projects.

If you are wanting to take the sign painting world by the horns be sure to read these 6 must haves for painting wood signs. I share the basic must haves to get you started on your own sign painting journey.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

DIY 4TH OF JULY WOOD SIGNS FOR TIERED TRAYS

Here’s what you’ll need to make your own set of patriotic wooden signs

If you purchased the PATRIOTIC DIY SIGN PAINTING KIT your wood blanks will come pre-stained. You can skip to the step #3

• pine 1x4 cut into these lengths: 6”, 10”, 12”

• Cricut cutting machcine

• Cricut Design Space

• Cricut green cutting mat

• oramask stencil film

• transfer tape

• vinyl squeegee

• stenciling sponge

• red, white, blue, black acrylic paint

• paint brushes

• stain color of choice

• lint free cloth

• gloves to protect your hands when staining

• Ryobi miter saw

• Ryobi sander

• 120 grit orbit sand paper

• xacto knife

• FREE CRICUT 4TH OF JULY CUT FILE

1. CUT & PREP YOUR WOOD PIECES

If you purchased the 4TH OF JULY DIY CRAFT KIT you can skip this step. If not you need to cut your 1x4’s to 6”, 10” and 12”. I use a miter saw to cut mine then give them a quick sanding with120 grit sand paper using my orbit sander. I stain my pieces then let dry for 24 hours. Once dry I sand around the edges to give it a distressed look. Now they are ready for paint :)!

2. CUT YOUR STENCILS

Cut out your stencils on your cutting machine, I use an older model Cricut explore and it always does a perfect job! I highly recommend using Oramask stencil film to cut your stencils out of. This material is specifically made for stenciling and performs very well. Weed your design and apply transfer tape to it so it is ready to go. Get your FREE Cricut cut files here to use for this exact 4th of July project.

3. PAINT YOUR BACKGROUND COLOR

Using a dry brush apply a THIN coat of paint on the front side of your wooden bases. For a more rustic look apply the paint so that it doesn’t touch the edge of the wood base and so that it a little uneven. Let that dry then paint a second coat. Let the second coat completely dry.

4. APPLY YOUR STENCIL

Using your vinyl squeegee apply your stencil to your painted wood base. Once you feel it is adhered good slowly remove the transfer tape off of your stencil. The best way to do this is to start at one corner and slowly roll the transfer tape off of your blue stencil material. PRO TIP: you never want to pull up when removing your transfer tape, this will cause your stencil to pull up as well. Use your finger to rub the exposed area of the stencil to work out any puckers or air bubbles.

5. PAINT YOUR STENCIL

Cut your stencil sponge into 3-4 sections, depending on the number of different colors you plan to use. Lightly dip the end of one of your stenciling sponges into your paint of choice, dab off excess paint onto a scrap piece of cardboard (or something similar) then using an up and down dabbing motion dab it onto the exposed areas of your stencil. Your paint coverage should be super thin, you want to be able to see the background color at this point. Let dry. Once dry dab on a second thin layer. If you are happy with the coverage you can move on to step 6. If you want a little more coverage wait for the second layer to dry then dab on a third layer of pain

6. REMOVE YOUR STENCIL

Using a sharp xacto knife or sewing pin peel your stencil up while your paint is still wet. Be careful not to touch the wet paint. Let your painted wood sign dry.

7. DISTRESS

This step is completely optional. If you want a little more rustic look lightly go over the front of your wooden sign with a sanding sponge or piece of sandpaper. I personally like adding this touch to my signs to give it a more farmhouse look. Wipe off the dust with a lint free cloth and you are ready to display them on your tiered tray.

DIY paint stick wall hanging, with FREE printable

MAKE RUSTIC INTERCHANGEABLE WALL ART USING PAINT STIR STICKS AND A PRINTER AT HOME

Paint sticks don’t sound like the kind of thing you would purposely hang on your wall as part of your décor. Well think again! They are actually PERFECT to use to make interchangeable hanging frames. AND they are SO cheap to make which makes this crafty DIY even better! With a little bit of paint, magnetic tape,printable and some twine you can transform your own stir sticks into a farmhouse style picture frame.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

BONUS grab my FREE printable to use for your own wall hanging. I love being a girl mom x4 but it for sure has it’s moments of hard conversations. One of those hard convos I had recently is the sole purpose to creating this printed wall hanging. I had plans to make these stir stick decorations but I wasn’t really planning to hang this exact piece. I was going to do something a little patriotic to tie in with this repurposed drawer into an American flag instead I chose to showcase a saying that would sink in a little deeper for my girls. When they read it I hope it sets in even deeper that they are perfect just the way they are.

If you like easy to make signs check out this super simple free standing wood sign. All you need is a printer and some mod podge and of course a piece of wood ;).

Here’s how you can make your own affordable rustic wall hanging

Here’s what you’ll need

• 4 paint stir sticks

• paint or stain I used gray paint

• paint brush

• magnetic tape

• twine

• scissors

• printable

Helpful tools

• home printer

• Ryobi miter saw

ONE- The first thing I did was cut the ends off of all of my paint sticks. You can keep these on if you want but I like the look of them cut off better. I used my miter saw to do this.

TWO- I painted the blank side of my paint sticks gray. I really wanted to stain them in gray but honestly I didn’t want the mess so instead I painted a thin layer then took a paper towel and wiped it off. This gives a faux stained look.

THREE- I attached a strip of magnetic tape to the insides, the side I didn’t paint, of each paint stick. To save on tape I cut a strip in half length wise for one top and one bottom stick. I’d never used this stuff before this project and so far I’m impressed with how well it works.

FOUR- I printed off my printable from my home computer and trimmed about 1/4” off of each long edge with my paper trimmer (if you don’t have one you NEED to get one lol they are so inexpensive and save so much time and stress from not having straight cut lines when you need them). Then I sandwiched the printable between the paint sticks at the top and bottom.

FIVE- To keep this stir stick wall art interchangeable I loosely tied my twine hanger to the ends of the top sides. This way if I want to change it out or if somehow a spaghetti noodle gets flung on to it, which can totally happen with four kids let’s be real, I can easily slip off the twine remove the old print add a new one and slip the twine loop back on. Super simple and easy!@

Like with all of my crafty tutorials if you have any questions please feel free to ask away:)!

Happy Crafting!

How to rust your own mason jar lids

Rusty mason jar lids are GORGEOUS! I love them but they can be so hard to find. If you can’t find them easily they can take forever to naturally rust in the elements outside, like months and months of time. But if you’re impatient like me you don’t have to wait for nature to work her magic on your brand new mason jar rings. You can rust them yourself in your kitchen using ingredients you probably already have!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

Yes, you read that right. You can rust up your own canning jar lids right on your kitchen counter in about a week!! I know that the method I’m sharing today isn’t the only way to get this done, and thank goodness it’s not because there shouldn’t just be one way to do things. This is just my preferred way to rust my own mason jar lids.

Here are a couple of projects I made using this same technique to rust mason jar lids

DIY RUSTY PUMPKIN FROM MASON JAR RINGS

DIY RUSTED MASON JAR RING PERSONALIZED ORNAMENT

Check out the video below or keep scrolling to read the written/picture tutorial.

Get instant access to all of my FREE printables, files, and more. Click here to get your password to my FREE RESOURCE LIBRARY.

Here’s what you’ll need to rust your own mason jar lids at home

• mason jar rings

• distilled white vinegar

• salt

• glass bowl

• 1 week’s time

HOW TO RUST YOUR OWN MASON JAR LIDS INSIDE THE QUICK AND EASY WAY

ONE- You will need a glass bowl. I use glass because it doesn’t break down like other materials such as plastic or metal. Glass is wonderful! I start by filling the bottom of the glass bowl with salt. I DO NOT MEASURE THIS. If you were hoping for a recipe with exact measurements this tutorial might not be for you. I just add enough salt to cover the bottom of the bowl lol.

TWO- Pour in some distilled white vinegar. I just eyeball this as well. You want enough to completely cover the mason jar lids once you put those in the bowl (that will happen in just a couple steps).

THREE- Give your ingredients a good stir. I use a popsicle stick for this and I stir till the salt starts to dissolve.

FOUR- Add in your mason jar rings. You can add in as many that will fit in to your bowl.

FIVE- Now add enough vinegar to your bowl so that your mason jar rings are completely submerged.

SIX- Now sprinkle some salt on top. I’m not sure if this step makes a huge difference but I do this just for good measure lol!

SEVEN- Let the mason jar lids sit for 24 hours. After 24 hours has passed take them out and let them dry on a towel. Once they are dry place them back into the salt & vinegar mixture.

EIGHT- Repeat step 7 for at least a week. After just a couple days you will start to notice the canning lids turning color and they will look like they have scratch like marks on them. This is exactly what you want to see happening. The longer you do the soaking/drying process the rustier your mason jar lids will get. You’ll also notice that the salt/vinegar solution is changing from a clear to a really gross color/consistency, this is supposed to happen too.

NINE- Once you’re happy with the rust on your canning jar lids you are all done and you can discard of the salt/vinegar mixture. I don’t rinse mine off after I just simply let them dry then use them or place them in my rusty mason jar plastic bin for safe keeping till I need them.

DIY mini St. Patrick's Day wood tags

DIY MINI WOOD TAGS FOR ST. PATRICK’S DAY

If you’ve been reading my blog you might know that my four daughters have been asking me to decorate more for the holidays…including St. Patrick’s Day decorations. Yes, that is a holiday they think I should decorate for too lol! So they win. I’ve truly been making an effort to have a more festive home even though daughter #4 totally rearranges everything.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I have been eyeing these adorable mini wood tags on Pinterest for forever now. They are CUTE! They tie in with pretty much anything. You can add these wood tags to a wreath, to a welcome sign, on the mantle (I really wish we had one but I’ll just have to make a faux mantle one of these days) or my favorite- to a tiered tray. Those trays are seriously rustic home décor overload! I love them!! I need to add one to my coffee bar soon.

If you’re looking for fun green holiday themed to make with the kiddos try this easy St. Patrick’s Day suncatcher.

To make this completely from scratch at home you’ll need a few power tools. But, if you don’t have power tools to DIY this craft from start to finish you can grab a DIY CRAFT KIT here. I haven’t always been super comfortable using power tools, actually I was deathly afraid of them not too long ago. Now that I’m over my power tool phobia here’s what I recommend for DIY crafters.

DIY St. Patrick’s Day Wood Tags

Here’s what you’ll need

• mini wood tags

• stencil material

• transfer tape

• white paint

• 3 shades of green paint

• sandpaper

• antiquing wax

• chip brush

• paint brush

• stenciling sponge

• twine

• masking tape

• vinyl squeegee

• CRICUT FILE- four leaf clover

If you’d like the same file I used to create this set of 3 mini wood St. Patrick’s Day tags you can get my Cricut file here. It’s in my FREE resource library. It’s where I keep all of my FREEBIES like files, printables, patterns, and more. You’ll need the password because I like to keep it a little bit secret but no worries it’s super easy to get. Jut fill out the prompt and you'll get instant access.

Other helpful tools I used

• Ryobi miter saw

• Ryobi sander

• Cricut cutting machine

• Cricut Access

• Cricut cutting mat

Watch the video or keep scrolling for step by step written/photo instructions for these wood St. Patrick’s Day tags.

Cutting your wood pieces

1. First you want to cut out your wood tags. I used my Ryobi miter saw to do this. Cut a 1x4 in to 3 5” long pieces. On the top of each 5” piece measure in 1” and make a mark. Set your miter saw to 45 degrees, line it up with your 1” mark and cut. Flip your tag over and do the same to the other side.

2. Now drill a hole in the middle of the top of each piece. This is for your twine holder to go through.

3. After you have that done give each piece a quick sanding. You don’t have to get crazy with this, it’s not a fine piece of furniture. I use 120 grit sandpaper for this and that’s it. Just enough to take off that shine it has when you get it from the lumberyard.

   WATCH THE VIDEO OF HOW I MADE THESE USING MY MITER SAW

Stencils

You can use any cutting machine to create your stencils. I use my Cricut Explore to make all of mine. If you use a Cricut you can get my cutting file here. I use Oramask stenciling film to make my stencils. While it is a little more expensive than other materials I have found it works the absolute best for stenciling.

Painting (the fun part!)

1. First a thin layer of white paint on each wood tag. Be sure it is a thin layer, you will still be able to see the wood grain through the paint. After the first thin layer is dry you can paint a second thin layer. You don’t want more than two layer of base paint on your wooden tags, or any painted wood sign. Too much paint will cause issues when stenciling with base paint peel up, which can be impossible to fix sometimes and honestly it just plain sucks to have to go back and fix.

2. After your base paint is completely dry you can apply your stencils to all three wood blanks. Apply your transfer tape to your stencils (if you bought my DIY CRAFT KIT this step has already been done for you). Peel the paper backing from your stencil/transfer tape. Go slow. Place your stencils sticky side down on the front of your painted wood tag. The front is just whichever side you prefer best ;). Using your vinyl squeegee, if you don’t have one you can use a plastic store rewards card, and rub the stencil to that it adheres to the wood. Slowly peel the transfer tape away from the wood leaving your stencil attached to the wood. I find that it works best when I roll the transfer tape away, check out this DIY PAINTED WOOD SIGN TUTORIAL for a closer look at how to do this.

3. Use masking tape to tape off the edges of your stencil so you don’t get paint on areas of the wood tags that you don’t want paint on.

4. Cut your stenciling sponge in half so you can use it in all three paint colors without mixing the colors.

5. Using one end of one of the sponges dip it in the lightest color of green. You need very little paint, the more paint you use the more paint bleed you will likely have. Dab your sponge onto one of your wood blocks where the clover is exposed on the wood. The coverage should be VERY faint. Let that dry and repeat up to three times. You don’t want to apply more than three coats as this could cause issues with paint peel up where you just stenciled.

6. Peel up your stencil and tape. Using an xacto knife helps to remove the middle piece of the clover.

7. Repeat steps 5 & 6 for your other two wood tag bases.

8. Let them dry.

Distressing

After your paint completely dries from stenciling you can start distressing your wood St. Patrick’s Day tags. I LOVE using antiquing wax for this process. Antiquing wax comes in a several different colors but my favorite its definitely the regular antiquing wax. Learn more about how to transform your DIY farmhouse style crafts with antiquing wax.

1. Using sand paper or your sander give a quick sanding to the edges, corners, and lightly on the front of each wooden tag. Wipe off and dust.

2. Take your chip brush and lightly dip it into your antiquing wax. Dab off the excess, a little wax goes a very long way. Much like you did with the sandpaper, focus on brushing the wax on the edges, corners, and lightly on the front of your wooden tags.

Adding twine

Probably the easiest step is adding the twine. Decide how long you would like your twine hangers to be. I think I measured mine at 12” or so. You’ll need 3 pieces, one for each wood tag. Feed one piece of twine through the hole in one of the wood tags then tie it in a knot.

You’re ready to display your St. Patrick’s Day wood tags in your home. I know it may seem like a lot of steps written out but really these are super easy and quick to DIY once you get going on them.

Like with all of my DIY tutorials if you have any questions please reach out. Leave a comment below or send me a message on one of my social media pages. You can find my links at the top.

Happy Crafting!

Do you love freebies? Don’t forget to check out my FREE RESOURCE LIBRARY. It’s where I keep all of my FREE printables, files, and more. Go here to get instant access to my library

DIY personalized mason jar lid ornament using buffalo plaid - DAY 3

DIY rusty canning jar lid ornament, personalized on buffalo plaid

Day 3 of DIY Christmas Ornaments

Day 3 of my 30 days of DIY Christmas ornaments…PERSONALIZED RUSTY MASON JAR LID ORNAMENT. I don’t know about you but I have a HUGE abundance of old mason jar lids. I save them from the hand painted mason jars I create and ship out in my Etsy shop. Here’s a tutorial I made for this adorable snowman painted mason jar set that is super popular in my shop.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

—-> Check out other DIY mason jar crafts <—-

Here is day 1 of the 30 days of DIY Christmas ornaments - DIY SCRAP FABRIC CHRISTMAS TREE

I really enjoyed making this personalized ornament for my family Christmas tree. So much so that I am going to make these as gifts for loved ones and teachers/school staff gifts! There were so easy and actually super quick to make.

If you’re a seasoned crafter you probably have everything you need to make this DIY mason jar lid ornament. But if not I will leave links to everything you’ll need to create your own canning lid Christmas ornament.

Here’s what you’ll need

• Cricut cutting machine

• Cricut Design Space

• HAND TYPE FONT

• Cricut cutting mat

• regular mouth canning rings/lids

• buffalo plaid fabric

• fabric scissors

• Oramask stencil film

• contact paper

• paint marker

• vinyl squeegee

• hot glue gun

• twine

• xacto knife

Check out the video tutorial from my YouTube channel or keep scrolling to read the written tutorial

First you want to create your stencil on your Cricut Design Space. I used the font HAND TYPEWRITER because I really like how this one looks. I use it often for different DIY craft projects I make. I made a circle that is the same size as the mason jar lid I used, 2.5”. Then I typed out my text, on two separate lines and I made my BOLD TYPE. Welded them together. I made it 2” wide. Then positioned it on the circle I offset it slightly so that there was more room on the top potion, then aligned the circle and text so they would align HORIZONTALLY. Then used the SLICE button to slice the font out of the circle. And sent it to my mat to cut.

I cut it out on STENCIL FILM. I know I totally could have used HTV but I wanted to try something a little different. Something a little easier, something that hasn’t been done a ton. That’s why I chose to use a paint pen/marker vs regular paint or HTV.

Then cut a square out of your fabric. I am using red buffalo plaid that I picked up from Walmart. It was in their fat quarters seasonal section. You want to cut your square larger than your lid. I cut mine a couple inches larger.

Then transfer your stencil onto your fabric. I used contact paper to transfer mine but you can use whatever material works best for you. After you place your stencil where you are happiest with it remove the transfer tape then pat the stencil down with your hand to make sure there are not any air bubbles.

---

---

Now use your paint marker to “trace” the areas that are exposed inside the stencil. Be sure not to press too firmly as the more pressure you apply the more likely you’ll have paint bleed. If you make a mistake no worries, you can fix it later :)!!

TIP: place a paper towel under your fabric to catch any paint that might bleed through

After you have your stencil all painted in you can remove it. It should release easily from the fabric. I used an xacto knife to take out the middle pieces. It does a great job at lifting them up with the sharp point.

Take your marker and fill in any areas that didn’t get good coverage. This does not have to look perfect. I actually LOVE that mine came out super imperfect. It gives it so much character and a more handmade Christmas ornament look and feel to it.

Place your fabric over the metal mason jar lid then place both inside the mason jar ring. You can gently pull the fabric to center it where you want it on the mason jar ornament.

Once you have the fabric where you want it glue it in place on the backside using your hot glue gun. You’ll want to glue fairly close to where the lid, fabric, and ring meet. This will give it a more secure hold. Glue all the way around the ring.

After the glue is dry trim away any fabric that hangs over the ring. Be sure not to trim it too closely to the lid part of your mason jar lid ornament. If you trim it too closely then the fabric won’t have enough of a “seam allowance” and your fabric will likely slip thru to the front of the ornament.

Add a twine hanger. I glued a piece of twine to the middle spot on the front of the ring then looped it to the back and hot glued it there as well. If I wanted a super strong hold I would have used my drill and drilled a small hole on the top and fed my twine thru there. But for not the hot glued hanger will work.

Then add a cute little twine bow. I glued mine on top of the twine I glued to the front to hide that and it worked great. Adding a simple twine bow really adds a little more rustic touch to the ornament too!

Once your hot glue is dry you’re ready to hang your mason jar ornament on your tree! I hope you enjoyed this tutorial and that it inspires you to create your own DIY ornaments and so much more <3 !

Check out more Christmas posts below

DIY Dollar Tree fall leaf garland

I just can’t get enough of fall décor! Especially when it literally costs me less than $3 to DIY! My four daughters and I went to the Dollar Tree last week to pick up some things for the oldest daughter’s friend for her birthday {see the fun dollar tree inspired birthday gift we made for her } and of course they had some of their Halloween and fall things out. So naturally we HAD to buy a few things to make some DIY rustic décor and a fun Halloween wreath that I can’t wait to start on. I’ve been on a DIY frenzy trying to get all my fall décor made before school starts back up. The last couple of years have had me so busy I didn’t decorate much for fall…or Christmas for that matter {aside from the traditional tree and stockings}. So this year I am making it my mission to bring the holiday explosion to our home, and I’m doing it the frugal way.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

How to make your own Dollar Tree Rae Dunn inspired fall burlap garland

Here’s what you need to make your own FALL burlap garland

• 2 packages of burlap leaves from the Dollar Tree

• twine/jute

• black acrylic paint

• white acrylic paint

• Cricut & cardstock to make stencils {or you can free hand these with an acrylic paint marker}

• scissors

• glue gun

• wire cutters {only if the wire will not easily come apart from the burlap leaves}

• 1 medium paint brush

• 1 small paint brush

• mini clothes pins

Cut out your stencils. I used a skinny type font and my Cricut Design Space. I made them 2.5” tall and cut them out of cardstock. Before cutting them out I made a line in the “A” so that the middle would stay attached while stenciling and I just free hand painted that small part in once I was done.

Remove the wire “stems” from the burlap leaves. For me, the brown ones peeled away super easy but the orange ones didn’t want to come off without taking the burlap with it. So, I used wire cutters on the orange ones.

Because these Dollar Tree burlap leaves are the exact same size you will want to trim up the brown ones so that you have and orange border going around them once you are finished. Just take a small amount off the edge, following the shape of the leaf.

Paint the brown burlap leaves white, even the back. The medium sized brush works great for this step. Let dry.

After the white paint is dry you can stencil on your FALL letters. I just held my in place and used a pouncing motion like I did on this stenciled canvas tote bag. Take care not to get outside the cardstock lines. If you need to you can use painter’s tape to tape the stencil off so you won’t have any bleed lines {just don’t press the tape down too much so it doesn’t mess up the work you’ve already done ;) }

Once your stenciled area is dry you can glue the white burlap leaves onto the orange burlap leaves. I only applied glue to the center of the white leaves. I didn’t want them to be completely glued down all the way around.

Measure out how long you need your burlap to be then add a few inches so you can loop the ends to hang. Attach your leaves with the mini clothes pins, or you can hot glue the burlap leaves directly on the twine.

Then you’re all done! SOOO super easy! And it was super inexpensive! Pair this with these rustic candy corns made from a 2x4 or this DOLLAR TREE painted pumpkin DIY makeover.

Check out the full video tutorial to these Rae Dunn inspired DIY burlap Dollar Tree FALL garland

Need more crafty fall ideas? Click here ——> for more DIY Halloween & fall decor

Dollar Tree pumpkins, how to give them a RUSTIC makeover

Frugal fall decorating, how to give a Dollar Tree pumpkin a rustic makeover

We’ve all seen them the bright orange pumpkins on the shelves at the Dollar Tree. You think to yourself ‘I could paint that up and make it look soooo much better’. Then fall comes and the darn ugly pumpkin is still sitting there untouched by your creativity. Yep…that’s me. I am totally that kind of Dollar Tree shopper and I’m not ashamed to admit it.

After having several of these little pumpkins sit on my craft room shelf for almost a year I decided what better time to give them a makeover than now?! Fall is almost here and I have been working like a busy crafty bee trying to gear up for this season. Check out my latest DIY, 2x4 candy corn they turned out SO stinking cute! AND you don’t want to miss this frugal find, Walmart clearance shoes, that I gave a total makeover to for my 3 year old to wear this fall. She absolutely LOVES them!

How to turn your DOLLAR TREE pumpkins into rustic perfectly distressed pumpkins

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I had everything I needed on hand, including the pumpkins, but here’s what I used to turn my pumpkin from bright orange into rustic farmhouse.

• Dollar Tree ugly pumpkin

• white spray paint

• skewer

• gold chalk paint

• lagoon chalk paint

• antiquing wax

• chip brush

• paint brush

• paint tray

First you want to paint your pumpkin white. I used what I found in our garage but you can use any kind of white FLAT spray paint. Stick the skewer in the bottom of the pumpkin so you can hold the pumpkin and spray all around it. Let it dry before you put it down. I used a blow dryer to speed up this process.

Next you want to paint your pumpkin with your gold chalk paint. I broke 3 small pieces off of the skewer and stuck them in the bottom of the pumpkin so that it would stand up and not touch the table while I was painting it. Let that dry completely before moving on to the next step.

Once your gold chalk paint is dry you want to very lightly dip the tip of your brush into your teal/blue colored paint. I used a color called lagoon and on it’s own is VERY bright but when used as an accent color it is absolutely gorgeous! You don’t want to completely cover the gold paint but lightly brush over it leaving light streaks of the lagoon colored paint. This will dry pretty quick.

Next you are going to repeat the previous step but instead you are going to use antiquing wax and your chip brush. I added a little more wax than I did the lagoon colored paint to give it a more rustic look. TIP: trim your chip brush down to about an 1” and it will work MUCH better.

Once you’re satisfied with your coverage you are all done! I’m not totally loving the stem on this on so I might replace it with a stick from the yard but for now it will tie in perfectly with my fall décor! I paired it next to the glittery gold 2x4 pumpkins I made a while back.

If you loved this tutorial you will love even more of my DIY fall craft tutorials

Check out the full video tutorial below