MINI glittery fairy jar Christmas ornament

DIY FAIRY JAR CHRISTMAS ORNAMENT

Day 9 of DIY Christmas ornaments

If you enjoyed one of my very first ever craft tutorials that I wrote, HOW TO MAKE GLITTERY LIGHT UP FAIRY JARS, then you will love this Christmas version. It’s such a cute mini version of the large light up fairy jar and I love the winter twist that it has. With the faux glitter snow it makes me think of the winter fairy from Tinker Bell. So adorable!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I was browsing the aisles of the Dollar Tree last year when I came across a mini plastic looking mason jar in Christmas ornament form. And I instantly knew my girls and I had to make a fairy jar for our Christmas tree.

Click here for 30 days of DIY Christmas ornaments

MINI FAIRY JAR CHRISTMAS ORNAMENT

Here’s what you’ll need

• Dollar Tree mini plastic jar ornament

• white tissue paper

• extra fine translucent glitter

• oracal 631 vinyl

• contact paper

• faux glitter snow

• matte finish mod podge

• paint brushes

• scissors

• assorted winter accents

• battery operated tea light

• hot glue gun

• hot glue sticks

• xacto knife

• Cricut cutting machine (I use a Cricut Explore)

• Cricut Design Space

• green cutting mat

• FREE FAIRY SVG LINK

1. CUT OUT DECAL

The first thing I did was cut my fairy decal out using my Cricut cutting machine. I used my GREEN cutting mat for this and THIS SVG CUT FILE (you can use my shareable Cricut link).

I measured how big my jar was then sized my fairy to fit. I used black Oracal 631 to cut my fairy out of. This is one difference from the larger mason jar version. In that version I used a cardstock cut out fairy but for this one I wanted to use sticky vinyl, make it a little easier.

2. APPLY THE FAIRY DECAL

I applied the fairy decal to the INSIDE of the Christmas ornament. I used contact paper as my transfer tape. The end of a pen worked well to help me position the decal before pressing it down. Once I was happy with the placement I used my fingers to work out any airy bubbles.

Then I slowly rolled the transfer tape, contact paper, off and away from the fairy decal. Since this has some delicate lines it can rip easily so be sure when you do this step to go very slow.

3. APPLY TISSUE PAPER

To get the frosted look I cut a piece of plain white tissue paper so that it was a little bigger than my mason jar Christmas ornament. I wanted it bigger in case I messed up I would have a little extra to work with. You want you tissue paper to be able to fully wrap around your ornament plus cover the top.

Then I used matte finish mod podge to apply the tissue paper to the Christmas ornament. A regular artist paint brush works great for this. I covered the front of my ornament in sections with the mod podge.

The I placed the tissue paper on top of it and carefully smoothed it out with my fingers. I did this all the way around the jar.

Once I got to the top of the jar I cut off so there was just enough to cover it. Then I cut slits in the tissue paper so it would lay down smooth.

I used my paint brush again to apply mod podge to glue the top pieces down. I trimmed off the excess with my scissors.

4. ADD GLITTER

After my tissue paper was pretty much dry I applied a thin layer of the matte finish mod podge to the front of the Christmas ornament and then sprinkled it with extra fine translucent glitter. Then I let that dry.

5. ADD WINTER EMBELLISHMENTS

To make my fairy jar more winter themed I added faux glitter snow to the flowers and moss. I glued the moss down first then glued the florals to the moss.

I even glued the moss to the bottom piece that screws onto the Christmas mason jar. I added the faux snow here and there.

6. ADD A TEA LIGHT

I let my ornament dry then I added a tea light.

I think it turned out SO CUTE!

If you have any questions please ask below in the comments.

Happy Crafting!

Check out more DIY Dollar Tree crafts below

DIY dowel rod snowman ornament DAY 8

This DIY Christmas ornament is SUPER EASY! Similar to the square snowmen ornaments I made last year. Only this time they are round and they have cute rosy cheeks like these mason jar snowmen I showed how to make on my blog. There are differences of course but all three of these snowmen are so adorable.

If you are a craft-aholic like myself, then you probably hang on to EVERYTHING. The dowels I’m using for this snowman ornament were actually leftover stems from a larger version of these 2x4 wood pumpkins. Really, I probably should have tossed these scraps BUT then I wouldn’t have been inspired to create this Christmas ornament tutorial to share here on my blog.

See more of my 30 DAYS OF DIY CHRISTMAS ORNAMENTS here

Here’s what you need to make a dowel rod snowman ornament

• 1”x1.5” cut piece of dowel rod - I found mine at my local home improvement store

• acrylic paint (white, black, orange, pink)

• jute

• screw eye

• paint brushes

• paint tray

• scissors

• optional: drop cloth to keep your surface clean

This ornament is so fun, easy and a wonderful Christmas craft to make with the kids. Don’t sweat it if they don’t come out perfect. Lord knows when we craft with our kids it’s never about the perfection, rather it’s about the memories and bond you’re building with your children.

1.PAINT

The first thing I did was paint the dowel rod piece all white, including the top and bottom. I let the first coat dry then I applied a second coat for a little more coverage then I let that coat dry before moving on to step 2.

2. CHEEKS

Because I want the nose to go over the cheek I painted the snowman’s cheeks first. This takes a TINY amount of paint, like a teeny tiny amount. I lightly tapped the tip of my paint brush into the pink paint then into the white paint, but less white paint than pink paint on my brush.

Then I made swirly circles with my brush. I probably should have used a round tipped brush for this but I grabbed a pointy tipped one and just didn’t want to hunt for a new brush so I went with it. It worked but not as good as it could have with a round tipped brush.

I kept added white and pink paint to the cheeks till I was happy with the way they looked.

3. NOSE

After the cheeks were dry I painted on an orange nose. I used the same pointy brush for this. I made a sideways triangle then filled it in with orange paint. I added a tiny bit of black paint to give it a little depth.

4.EYES & MOUTH

Using the same brush I painted on irregular looking circles for the eyes and for the mouth in black. I really tried to make them look like coal.

After the black paint was dry I used the end of my paint brush to make accent dots on the eyes and mouth.

5. SCREW EYE AND JUTE

I screwed the hanger (screw eye) into the top of my snowman ornament to hang it. Then I added a piece of jute to hang it from the Christmas tree.

I hope you enjoyed this crafty Christmas ornament tutorial. Let me know if you have any questions in the comments below.

Don’t forget to pin the image below to save for later :)!

Happy Crafting!

Check out more Christmas posts below

DIY easy wood tag ornament with cute wooden beads DAY 7

Super easy wood tag Christmas ornament DIY

Christmas will be here before we know it! Last year I started a 30 days of DIY Christmas ornaments challenge for myself and I got so crazy busy with orders from my shop that I couldn’t squeeze very many in. I completely underestimated how busy I would be last year.

This year I have toned my shop down a lot. I am in a place where I am no longer making finished home décor items {thank goodness because while I LOVE creating it does take more time to make finished pieces than it does to create files and craft kits} and I am solely focusing on SVG’s, DIY craft kits, and writing craft tutorials for you to enjoy.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind

I’m just going to pick up where I left off last year with my 30 days of DIY Christmas ornaments.

---

DAY 7 of my 30 days of DIY Christmas ornaments I made a simple stamped wood tag with wood bead accents to hang it from.

These little wooden beads are SUPER POPULAR right now. And for good reason because they are so versatile. I have used them for photo accents, bead garland, Christmas ornaments, keychains, the list goes on.

Today I used them on this ornament and it was super easy to make. It took just minutes to make AND there was virtually NO MESS to clean up after.

Here’s what you’ll need to make a stamped wood tag Christmas ornament

• mini stamp set

• black ink pad (this one is similar to the one I used)

• wood tags

• bakers twine

• wood beads

• masking tape
  
  

1.STAMP

The first thing I did was think of a saying. I wanted this one to say “O come let us adore Him”. It’s short and sweet and the reason for the season. Mine is FAR from perfect but that’s what makes handmade so special anyway.

I had a paper towel on hand so I could stamp off the excess. I lightly tapped the stamp onto the black stamp pad. You do not want a heavy hand for this. Then again lightly pressed it onto my wooden tag. Very lightly. If you press too hard you’ll get markings from the edges of the stamp. You may want to practice this a few times on your paper towel before trying it on the wooden tag.

Then I let that dry.

2. ADD BAKERS TWINE

Next I added my bakers twine. I used one that was white and had a bit of silver in it. I just eyeballed a length I wanted. Folded it in half and fed the looped end through the hole in my wood tag. Then I pulled the loose ends through the loop to secure it onto the tag.

3. ADD BEADS

The beads I used were fairly small and it was difficult to feed the twine through the small holes. I added a piece of masking tape to the open ends of the twine to make it easier.

I fed three small beads onto the twine then tied a knot at the top of the beads so they stayed in place.

4. KNOT THE TWINE

I removed the tape and tied the two ends of the bakers twine together so I could hang it on the Christmas Tree.

That’s it. No painting, no glue gun, no fuss really. Super simple Christmas ornament you can even make with the kiddos.

I hope you enjoyed this Christmas ornament tutorial. Check out more of my Christmas and winter themed DIY crafts

DIY wood block snowmen ornaments, DAY 6

DIY wooden snowmen Christmas ornaments

Day 6 of 30 days of DIY Christmas ornaments

Day 6 of my 30 days of DIY Christmas ornaments I made these cute wood block snowmen! They were SO SIMPLE and they were SO QUICK to make too! I haven’t made these with my four daughters yet but they are definitely on the list of Christmas ornaments to make with them.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind

To make this DIY craft even easier for you I put together a DIY CHRISTMAS SNOWMEN ORNAMENT CRAFT KIT. I know not everyone can use or has access to power tools like the ones I use in my crafty tutorials. So with some of my more popular projects you can purchase a DIY craft kit so you can make your own at home. Leave all the cutting and presanding to me, you take care of all the creativity to really make it come to life.

Watch the video tutorial or keep scrolling to read how to make your own wooden snowman ornament

Here’s what you’ll need to make your own wood snowmen Christmas ornaments

• DIY CRAFT KIT

OR if not snagging your own craft kit here’s a list of all the supplies you'll need

• 2”x2” piece of wood, I use pine

• miter saw {I use this RYOBI miter 12” slider to cut all of my projects and LOVE it!}

• sander {I use this cordless orbit sander from ROYBI and LOVE it too!}

• white acrylic paint

• black acrylic paint

• orange acrylic paint

• paint brushes

• screw eyes

• twine

The first thing you need to do is to cut your piece of wood in to cubes. The wood I used is called a 2”x2”, it actually measures approx. 1.5”x1.5” lumber measures weird like that lol! So, I cut 4 pieces into 1.5” cubes. The miter saw I use has a ruler on the side of it to make measuring super easy. If you are looking into getting power tools I wrote this post for crafters about what kinds of power tools you need. I used to use my husband’s power tools and I am SO glad I finally purchased my very own set. I am a huge fan of RYOBI power tools and recommend them to any fellow crafter.

Next, you want to give your wooden blocks a quick sanding. I use 120 grit sandpaper for this. You can use a regular piece of sandpaper for this step but using a power tool sander is much faster.

After you give your blocks a quick sanding be sure to wipe the sawdust off of them. Then paint them with a thin layer of white acrylic paint. Once that layer is completely dry you can paint a second thin layer of white acrylic paint to give it a little better coverage. Think of this like when you paint your nails, you apply a thin base coat first then once that dries you apply a second coat to get a good even coverage.

Let the white paint dry. After it dries you can paint on the face. I used orange and black acrylic paint for this step BUT you could totally use paint markers or even an orange and black sharpies for this step and they would turn out just as cute!

If you want to add little accent dots to the snowman’s eyes just use the end of your paint brush. Lightly dip it into your white acrylic paint and dab on where you would like the accent dot to go.

Add a 3/4” screw eye to the top middle of your wood snowman ornament. I just eyeballed mine but if you want to get an exact measurement then you could find the middle by making an X going from cross corner to cross corner. Where the lines meet that’s where the middle is.

Loop a piece of twine through the screw eye then tie it in a knot. You’re ready to hang this adorable little wooden snowman set on your Christmas tree. This is such an easy ornament to make with the kids too! Not a whole lot of skill is required making it perfect for little ones.

As always, if you have any questions please reach out and ask:)! You can leave a comment below or send me a message on any of my social media platforms {links are above}

DIY wood spool ornament, DAY 5

DIY WOOD SPOOL CHRISTMAS ORNAMENT

Day 5 of 30 days of DIY Christmas ornaments

Hey guys! Day 5 of 30 days of DIY Christmas ornaments is a really special one for me. I have several of these old wood spools that were given to me by my grandma, the mother of all things crafty! This women could paint a masterpiece with mud and sew like no ones business! She was the most talented and creative soul I have ever met in my lifetime and I’m thankful to have been given a small fraction of her wonderful God given talents.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

In her old sewing basket she had held on to some super old wooden thread spools. Did I mention my grandma also kept everything??? I think this is a crafter gene lol! Must not throw anything away because you just never know when you’ll need it! So these little wooden beauties were among the wonderful treasures she kept in her old wicker sewing basket. I, of course, could not ever get rid of such gems! So they’ve been sitting in that basket till now. I didn’t want to alter them too much so painting them was out of the question. But glue a piece of fabric would cause too much damage so I thought ‘why not make a fun little Christmas ornament out of a couple of them?’ And so I did!

Day 5 of DIY Christmas ornaments is probably the easiest ornament I’ve made so far on my 30 days of ornament making. If you can use a glue gun and thread a bead you are a shoe in!

You can watch the WOOD SPOOL DIY CHRISTMAS ORNMENT video

Here’s what you’ll need to make your own wood spool DIY Christmas ornament

• 2 old wood spools

• 3 wood beads

• scrap fabric

• thin ribbon

• scissors

• hot glue gun

• mini hot glue sticks

First you need to cover your wood spools in fabric. I used a scrap piece of fabric I had left over from when I made this DIY 4TH OF JULY TIE RAG WREATH. I don’t think I included this particular fabric in my tie wreath but I bought it the the intent to use it for that lol. It never hurts to have extra pretty fabrics on hand!

Cut your fabric piece so it’s the size of the middle party of your wooden spool. I really like the frayed edges so I cut a tiny slit in the fabric then I ripped it the rest of the way to give it that frayed look.

---

If you are more of a visual learner {this is totally me!} be sure to check out my YouTube channel. This is THE hub I use to hold all of my DIY CRAFTY VIDEO TUTORIALS

---

Then glue your fabric pieces to your wood thread spools. I used as little glue as possible for this so I didn’t ruin the wooden spool.

*crafty tip- if you are making this with little ones be sure you are using a LOW temp glue gun. I have found that using the mini glue guns they don’t get as hot as the larger full sized glue guns.

I added a small ribbon bow around the larger of the two wood spools. I didn’t want them to look identical and thought this little bow broke it up just enough.

Now your DIY wood spool Christmas ornament is ready to put together. The wooden beads I used I had already painted from a previous project I did, unfortunately I don’t have a tutorial for this :/ but it’s super easy to paint them. I used white acrylic paint and painted two thin coats on each bead. To make it even easier I set the beads on the tip of an xacto knife to hold on to it while I painted. I just placed the sharp pointy end of the xacto knife in the hole of the bead and it was perfect!

You’ll need to cut a piece of ribbon that is 3x the length of what your ornament will be. Thread on one of your painted beads on the bottom, leaving an inch or so. Then tie the bottom piece of the ribbon in a couple of knots. Next place the knot so that it is just under the opening of the hole on the bead, apply a decent sized drop of hot glue and let it dry completely. This will keep your ornament from falling apart.

I tried to just tie a ton of knots that I thought were bigger than the hole of the wood bead but the giant knot kept slipping through, so I gave up and the hot glue worked SO much better!

After the hot glue is dry you can string on the rest of the pieces of your ornament. Here’s the order mine were in from top to bottom

• bead

• wood spool

• bead

• wood spool

• bead

Then tie what’s left of the ribbon on the top part of the ornament into a loop. Be sure you don’t pull the ribbon clean through the wood spools and beads. I held the ribbon at the base of then pulled it tight.

And that’s it. Your DIY wood spool Christmas ornament is finished:)!! I hope you enjoyed this easy craft tutorial and I would LOVE to hear how yours turns out if you make your own.

If you have any questions please feel free to reach out to me. Leave a comment below or send me an email.

Check out more posts below

DIY mason jar lid snowman Christmas ornament, DAY 4

How to make a super cute snowman Christmas ornament from a mason jar lid

Day 4 of DIY Christmas Ornaments

Day of 4 of DIY Christmas ornaments is this super easy and adorable mason jar lid snowman. He is complete with a mini set of mittens and a cute little pair of earmuffs! This little guy was really simple to make and is a great use for all those extra lids from your mason jar crafts. And if you follow me on here at all I’m not shy about my love for mason jars! I’ve always loved them, even before they were all mainstream lol!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

If you missed the first few days of my 30 DAYS OF DIY CHRISTMAS ORNAMENTS be sure to click here to see the full list of make your own ornaments

If you love mason jars as much as I do be sure to check out my DIY MASON JAR CRAFTS for more inspiration.

Check out the snowman mason jar lid video tutorial below or keep scrolling to read the step by step instructions.

Here’s what you’ll need to make your own mason jar lid snowman for your Christmas tree.

• regular mouth mason jar lid

• white chalk paint

• fabric scissors

• craft scissors

• paint brush

• mini pompoms

• paint pens

• orange acrylic paint

• felt

• pipe cleaner

• decorative ribbon

• glue gun

First you want to paint the bottom side of your mason jar lid {the non silver side}. I used chalk paint to paint mine but any kind of white paint should work fine, even spray paint.

First you want to paint the bottom side of your mason jar lid {the non silver side}. I used chalk paint to paint mine but any kind of white paint should work fine, even spray paint.

While your mason jar lid is drying cut out the tiny mittens from felt. I free handed this step and they were actually pretty easy to make. So that they would match I used the first one I cut out as my template to cut out the second one.

Now measure about half way around your mason jar lid for the ear muffs using your pipe cleaner. Then cut it to size with your craft scissors.

I know it’s hard to tell in the picture but I used a black paint marker, or paint pen, to draw on the eyes and the mouth. I LOVE these paint pens and I actually use them more than I thought I would for crafts like on this DIY PERSONALIZED MASON JAR LID. They come in hand for all kinds of projects. If you want to add little accent dots on the eyes with white paint be sure to do so when the black paint is all the way dry. I made the mistake and rushed that step and you can totally see the ugly error.

I painted on my snowman’s nose but if I had an orange paint pen I would have use that instead to create the nose. If you use paint it takes VERY LITTLE .You can vaguely see the little orange dot on the paper towel, that’s what I used to dip my paint brush in to paint the nose. And I didn’t even use very much of it.

Then glue down the earmuffs. You want to glue the pipe cleaner to the mason jar lid first then glue the mini pompoms down on each end of the pipe cleaner. {btw my 10 year old daughter totally had to tell me I’ve been spelling pompoms wrong lol! I was spelling them as 2 words which is clearly wrong. Hey, I’m a really great crafter lol spelling isn’t really my strong suit}.

Next, glue on your snowman’s gloves. I faced the gloves so that the thumbs were facing in which if you do that to yourself is wrong but trust me they actually look better facing the wrong direction

Last, loop a piece of ribbon and glue it to the back of your snowman mason jar lid. For extra support I recommend gluing a piece of felt over it. I cut mine in the shape of a heart so it looked pretty instead of just a circle or a misshaped cut piece of felt. You can also write on the back of the ornament who made it and what year with your paint pen.

Now your adorable snowman is ready to hang on your Christmas tree! I hope you enjoyed this tutorial and you make wonderful memories with your kiddos making these for your own tree. If you have any questions about this crafty tutorial or any others I’d love to hear from you. Leave a comment below or send me an email.

Check out more Christmas posts below.

DIY personalized mason jar lid ornament using buffalo plaid - DAY 3

DIY rusty canning jar lid ornament, personalized on buffalo plaid

Day 3 of DIY Christmas Ornaments

Day 3 of my 30 days of DIY Christmas ornaments…PERSONALIZED RUSTY MASON JAR LID ORNAMENT. I don’t know about you but I have a HUGE abundance of old mason jar lids. I save them from the hand painted mason jars I create and ship out in my Etsy shop. Here’s a tutorial I made for this adorable snowman painted mason jar set that is super popular in my shop.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

—-> Check out other DIY mason jar crafts <—-

Here is day 1 of the 30 days of DIY Christmas ornaments - DIY SCRAP FABRIC CHRISTMAS TREE

I really enjoyed making this personalized ornament for my family Christmas tree. So much so that I am going to make these as gifts for loved ones and teachers/school staff gifts! There were so easy and actually super quick to make.

If you’re a seasoned crafter you probably have everything you need to make this DIY mason jar lid ornament. But if not I will leave links to everything you’ll need to create your own canning lid Christmas ornament.

Here’s what you’ll need

• Cricut cutting machine

• Cricut Design Space

• HAND TYPE FONT

• Cricut cutting mat

• regular mouth canning rings/lids

• buffalo plaid fabric

• fabric scissors

• Oramask stencil film

• contact paper

• paint marker

• vinyl squeegee

• hot glue gun

• twine

• xacto knife

Check out the video tutorial from my YouTube channel or keep scrolling to read the written tutorial

First you want to create your stencil on your Cricut Design Space. I used the font HAND TYPEWRITER because I really like how this one looks. I use it often for different DIY craft projects I make. I made a circle that is the same size as the mason jar lid I used, 2.5”. Then I typed out my text, on two separate lines and I made my BOLD TYPE. Welded them together. I made it 2” wide. Then positioned it on the circle I offset it slightly so that there was more room on the top potion, then aligned the circle and text so they would align HORIZONTALLY. Then used the SLICE button to slice the font out of the circle. And sent it to my mat to cut.

I cut it out on STENCIL FILM. I know I totally could have used HTV but I wanted to try something a little different. Something a little easier, something that hasn’t been done a ton. That’s why I chose to use a paint pen/marker vs regular paint or HTV.

Then cut a square out of your fabric. I am using red buffalo plaid that I picked up from Walmart. It was in their fat quarters seasonal section. You want to cut your square larger than your lid. I cut mine a couple inches larger.

Then transfer your stencil onto your fabric. I used contact paper to transfer mine but you can use whatever material works best for you. After you place your stencil where you are happiest with it remove the transfer tape then pat the stencil down with your hand to make sure there are not any air bubbles.

---

---

Now use your paint marker to “trace” the areas that are exposed inside the stencil. Be sure not to press too firmly as the more pressure you apply the more likely you’ll have paint bleed. If you make a mistake no worries, you can fix it later :)!!

TIP: place a paper towel under your fabric to catch any paint that might bleed through

After you have your stencil all painted in you can remove it. It should release easily from the fabric. I used an xacto knife to take out the middle pieces. It does a great job at lifting them up with the sharp point.

Take your marker and fill in any areas that didn’t get good coverage. This does not have to look perfect. I actually LOVE that mine came out super imperfect. It gives it so much character and a more handmade Christmas ornament look and feel to it.

Place your fabric over the metal mason jar lid then place both inside the mason jar ring. You can gently pull the fabric to center it where you want it on the mason jar ornament.

Once you have the fabric where you want it glue it in place on the backside using your hot glue gun. You’ll want to glue fairly close to where the lid, fabric, and ring meet. This will give it a more secure hold. Glue all the way around the ring.

After the glue is dry trim away any fabric that hangs over the ring. Be sure not to trim it too closely to the lid part of your mason jar lid ornament. If you trim it too closely then the fabric won’t have enough of a “seam allowance” and your fabric will likely slip thru to the front of the ornament.

Add a twine hanger. I glued a piece of twine to the middle spot on the front of the ring then looped it to the back and hot glued it there as well. If I wanted a super strong hold I would have used my drill and drilled a small hole on the top and fed my twine thru there. But for not the hot glued hanger will work.

Then add a cute little twine bow. I glued mine on top of the twine I glued to the front to hide that and it worked great. Adding a simple twine bow really adds a little more rustic touch to the ornament too!

Once your hot glue is dry you’re ready to hang your mason jar ornament on your tree! I hope you enjoyed this tutorial and that it inspires you to create your own DIY ornaments and so much more <3 !

Check out more Christmas posts below

DIY gnome ornament from a paint brush, DAY 2

EASY DIY GNOME CHRISTMAS ORNAMENT

Day 2 of 30 days of DIY Christmas ornaments

On the second day of DIY Christmas ornaments I turned this boring chip brush into a fun little GNOME! I really wasn’t sure how the finished product was going to look but I couldn’t get over how much the bristles on the paint brush look like a beard! More specifically an old man gnome beard lol! I had to at least try to turn it into a gnome and it actually turned out sooooo super adorable!

These brushes is what I always recommend for applying antique wax to distressed rustic looking projects. They are the same brushes I send out in my DIY CRAFT KITS so I always have a big box of them on hand.

Did you miss day 1? Not to worry! Here is DAY 1 OF DIY CHRISTMAS ORNAMENTS

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

Seriously these ornaments are fun to make for adults and kiddos! I could have sat there all day and created one after another <3!!

Here’s what you need to make your own little gnome Christmas ornament

• 1” chip brush

• felt

• small pom pom

• thin ribbon

• decorative ribbon

• hot glue gun

• fabric scissors

First start by tying a ribbon hanger in the hole of the paint brush so you can hang it on your tree. Then cut a piece of felt just a little wider than your chip brush. Felt can be a tricky thing to cut so I highly recommend using a good pair of fabric scissors like these —-> click here to see fabric scissors. You can use any color or pattern felt you’d like, I chose green because it’s what I had on hand that looked the most festive.

Then glue the piece of felt to your chip brush. You don’t want to pull it tight around the shape of the brush because it will look like the shape of the brush and not a gnome hat. Leave it loose around the bottom part of the brush so that it’s full there. Glue it around the metal part and the back side of the handle of the chip paint brush. You may need to trim away the excess so that it lays flat and not bunched up. {see the video above for a more detailed visual on how to do this}.

Next, trim away the extra that hangs over the tip of the chip brush, you want to leave about an inch or so overhang.

Using your thin ribbon tie a bow just above the tip of the chip paint brush to finish off the top of the hat.

Add a little 1/2” decorative ribbon around the base of the hat. This will break up the felt and give it a little more Christmas-ey look.

Then hot glue on a little nose just below the metal on the chip paint brush. Let it dry and your DIY gnome ornament is ready to hang on your Christmas tree.

These gnomes are SOOOOO easy to make and SOOOOOOOOOOO cheap too!

Let me know what you think and I’d especially LOVE if you shared pictures of your finished gnome ornament here on the blog.

DIY scrap fabric & ribbon Christmas ornament, DAY 1

DIY EASY CHRISTMAS ORNAMENT

I am SO excited about my 30 days of DIY Christmas ornaments. And first up on the list is this super cute scrap fabric Christmas Tree! There are SO many really great DIY ornament tutorials out there and I can’t wait to share with you some of my favorites my family and I have made over the years…and some new ones too!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

For this fun tree ornament I used a piece of scrap fabric, and not just any fabric I used left over fabric from a DIY Halloween costume I made for daughter # 3. I almost threw it away but I had that little crafty hoarder on my shoulder that said ‘no Megan! Keep that because you might need it later’ lol! And clearly I was glad I listened because I got to turn those scraps into a super cute Christmas ornament.

If you love DIY CHIRSTIMAS/WINTER CRAFTS here are even more DIY projects to check out click here

Here’s what you’ll need

• fabric scraps

• ribbon

• twine

• assorted buttons

• stick

• cutters (this is what I used, although it’s not the ideal tool to use)

• glue gun

• fabric scissors

---

—> Want to learn how to make all those amazing hand painted signs you see everywhere? Click my SIGN PAINTERS COURSE for more details <—

---

Check out the video tutorial or keep scrolling to see picture instructions. Don’t forget to stop by my YouTube channel and subscribe to keep up with all my up to date DIY crafty videos

First trim down your stick. I made mine so that it was a little wider than the width of my hand. I used wire cutters to trim mine, which truthfully wasn’t the best thing to use but it was what I had on hand and it worked.

Now cut your scrap fabric into strips. Like I said earlier, I used pieces from a costume to make mine. I cut my strips approx. 1” wide.

Cut the strips for your ribbon. I gaged about how wide I wanted my base then added about an inch. I used that piece to measure out the rest of the strips and cut them to the same size. I ended up cutting 3 strips of each ribbon but only used 2 of each.

Before I started tying the strips of fabric and ribbon onto the stick I went ahead and hot glued the buttons together. This way they were completely dry and ready when I needed them. I used 1 small white star, 1 small red button, and 1 even smaller green button. I hot glued the red button on top of the star, let that dry, then hot glued the green button on top of the red button.

Next start tying on your strips of fabric and ribbon. Be sure to leave room at the bottom for the base of the tree. Don’t pull the fabric pieces too tight. Depending on the type of fabric you are using pulling too tight can cause it to become stretched out. I’m using t-shirts scraps {from a costume I made for daughter # 3) and if pulled too tight then it would be way too stretched out and loose it’s shape.

After you have all your pieces tied to the stick you want to straight out each piece before you cut it. That way you have a nice straight tree line to cut.

Now cut your tree into the shape of a triangle. I highly recommend using fabric scissors for this step. I tried using my regular craft scissors and it totally failed {you can see it in the video at the top of the post} So I had to pull out my beloved fabric scissors and they worked SO MUCH BETTER! After you have both sides cut into the triangle shape you can trim them to make them even.

Then hot glue your buttons to the top. I glued mine to the side that didn’t show the knots. Let the glue dry. Then add your twine to hang. I glued my twine hanger around the buttons because it seemed to secure it more.

And now it’s ready to hang on your tree! I can’t wait to make more of these with my girls. When I record my DIY tutorials I don’t usually have my kiddos help, well because anxiety goes up lol. And if I let one help they ALL want to help and having 4 young kids in a small space trying to record a craft video that makes sense enough to post for the world to see is REALLY hard hahaha! In all seriousness I hope you enjoyed this crafty tutorial and be sure to check back for more 30 DAYS OF ORNAMENTS.