DIY 4th of July wood tags

Easy 4th of July wood tags for rustic decor

I love those little wood tags. They are oh so cute and fit perfectly on a farmhouse style tiered tray. You can literally create these wooden tags for any occasion or season AND they are SO cheap to make! Especially if you have scrap pieces of 1x4’s around.

For my 4th of July themed coffee bar I told myself to get an early start because I would totally put it off and not make all the things in time to both share with you all AND get my display up in time to enjoy it for the holiday. So I got my butt in gear, cut myself some wooden tags, put on some makeup & real clothes and went live on my Facebook page while I made these little wooden patriotic tags.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Here’s what you need to make Fourth of July wood tags

• wood tag cutouts (click here to see how to make them yourself)

• red, white, and blue acrylic paint

• wood star or star template

• jute or twine

• paint brushes

• sandpaper

• heat gun (if you want to speed up the drying process)

• chip brush for antique wax

• antiquing wax

• scissors

• lint free cloth

• paint tray

• canvas drop cloth to protect your surface

1.PAINT THE WOOD TAGS

Since these are patriotic themed wood tags I went with the colors red, white, and blue.

I painted two of the tags all white, when the first coat was dry I painted a second coat on them. Sorry for the grainy pic I took snips for my fb live I did to create these.

Then I painted the third wood tag blue. I used an English blue and not a true blue so it would tie in better with my rustic farmhouse looking home décor.

2. PAINT RED STRIPES

Unlike my chunky 2x4 wood flag where I used tape and got a cleaner look I just eyeballed the stripes on these wood tags and was happy enough lol! But if you want a little cleaner lined look to your stripes you can use masking or painters tape to make the lines a little straighter, even, and more crisp.

I painted 3 stripes on each wood tag. One down the center then one stripe on either side of the center stripe.

3. ADD A STAR

You can free hand this, use an adhesive stencil, a cardstock stencil, or trace a wood cutout of a star like I did. I had a leftover star from a Christmas ornament that I didn’t use so naturally I put it with the rest of my hoarded craft supplies. I centered it on my wood tag then traced around it with a pencil.

I took a small paint brush and painted a thin coat of white acrylic paint. After that was dry I painted a second coat over it.

To help speed up drying time I used my heat gun. This tool was so inexpensive and comes in handy all the time!

4. DISTRESS THE WOOD TAGS

If I was not in my house I would have used my sander for this step. But since I was inside I used 150 grit sandpaper. I focused on the edges and corners and lightly went over the fronts of each wood tag.

5. ANTIQUING WAX

If you’ve read some of my other posts you might know that I LOVE antiquing wax for my distressed pieces. This stuff is so good and gives pieces such a primitive look.

If you want a more in-depth tutorial on how to use ANTIQUING WAX I created an entire post on how I use it on my craft projects.

6. ADD TWINE TO YOUR WOOD TAG

The last step is to add a piece of twine to your wood tags. I went with a thicker jute for my tags since the hole I drilled in the 1x4 tags was on the larger side.

That’s it! These wooden tags are so easy to create for your rustic 4th of July decorations. If you have any questions leave them in the comments below.

Happy Crafting and be sure to check out more DIY craft tutorials below.

DIY hello sunshine stained wood sign + FREE SVG

DIY STENCILED HELLO SUNSHINE SIGN

Make this simple and chic hello sunshine sign to display with your warm weathered décor. I used my old school Cricut Explore to make this wood sign but you can use any vinyl cutting machine you have. Be sure to grab the FREE SVG in my free resource library to make this exact design (find the link below;) )

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

Here’s what you need

• prestained wood base (I made a square from a 1x8)

• white acrylic paint

• paint brushes

• paint tray

• matte finish mod podge

• oramask stencil film

• transfer tape

• vinyl squeegee

• weeding tool (I picked mine up from the dollar tree)

• Cricut cutting machine

• Cricut Design Space

• green Cricut cutting mat

• FREE hello sunshine SVG

Want to learn more techniques for painting wood signs? CLICK HERE to check out my list of DIY sign painting tutorials for the most crisp clean lines for your lettered painted signs.

The type of stenciling I used for this wood HELLO SUNSHINE sign is called REVERSE STENCILING. I also used this stenciling technique on this BLESS OUR NEST wood sign. I love this technique when I’m only using two colors, the base color and the letter color. It gives super crisp lines and is really quick to do.

1.CUT THE STENCIL

Upload the HELLO SUNSHINE SVG into Cricut Design Space (or the program you are using with your fancy cutting machine). Then add a square to the canvas. Size the square so it’s about the same size as the wood base you are using. I sized mine to 7.25” then resized the HELLO SUMMER SVG till I was happy with the size of that. This process isn’t a must, you can just cut the SVG out without a square around it BUT adding this square does make centering your design much easier when you go to stencil the design.

Once you happy with the size select both the SVG and the square and center them. After they are centered and still both selected use the Cricut SLICE feature to slice the SVG out of the square.

Now you should have 3 images. You will only need the square that has the circle cut out of it so delete the two other circle images.

This is what your canvas should look like when you are ready to hit MAKE IT in Cricut Design Space.

I used ORAMASK STENCIM FILM and the Cricut GREEN cutting mat. I set my machine dial to cut vinyl.

2. APPLY THE STENCIL

When weeding this design you want to weed out the CIRCLE and the MIDDLE PIECES from the letters.

Use transfer tape to easily transfer the image onto your wood base. I’ve used LOTS of different transfer tapes and this brand is one of my favorites.

PRO TIP: you can reuse your transfer tape over and over again. As long as it is still tacky and fits the design you want to transfer you can use it. I often use my transfer tape 3-4 times before getting a new piece.

Align your stencil then press down using your hand and a vinyl squeegee. Working from the middle and then out press out the air bubbles.

Now, roll your transfer tape off your design. Be sure to go slow, especially with this design as it has delicate lines that can rip easily.

3. SEAL THE STENCIL

This step isn’t an absolute must but you’ve already worked this hard why ruin it with paint bleed? I always hate myself when I skip this step so just save yourself from a kick in the butt later and seal your stencil before you paint ;)!

Paint a SUPER THIN layer of matte finish mod podge all over your design. Essentially what you are doing is filling in all of those tiny little air bubbles that you can’t see that are between your stencil and your wood base with a clear layer. This keeps your paint from filling in those air bubbles, aka: paint bleed.

Be sure you are painting the thinnest of thin layers when doing this step. If it’s too thick your paint will peel up with your stencil when you remove it…again speaking from LOTS of sign making experience lol! Then let that dry completely before moving on to the next step.

4. PAINT YOUR DESIGN

After your mod podge seal has dried you can paint your design. The lighter the color the more layers you will likely need to cover your design completely. For your first layer of paint you want to paint it on thin enough so that you see the wood grain through the paint. I used white acrylic paint for this project and painted 3 coats total.

After you apply the first layer wait for it to dry completely before moving on to the second coat. If you need a third layer of paint repeat the drying process again then paint the third layer.

5. PEEL UP YOUR STENCIL

After your happy with the paint coverage it’s time to peel up the oramask stencil film. I personally peel my stencils up while my paint is still wet but some prefer to peel after their paint has dried, both ways work. Grab one corner of the stencil and peel it off toward the opposite corner.

Then using your weeding tool CAREFULLY peel up the lettering inside of the circle. I ended up grabbing a sewing pin for this as my weeding tool was a little too large for the job.

Let your sign sit and dry completely before displaying in your home with the rest of your summer decorations.

I just love how this little sign turned out! It’s so simple and it can be displayed with both spring and summer décor. I extra love double duty decorations!

If you have any questions about this DIY craft tutorial or any others on my blog please reach out.

Check out more sign painting tutorials below. Happy Crafting!!

DIY Tiered Tray signs for 4th of July with Rae Dunn inspired SKINNY FONT

DIY 4TH OF JULY TIERED TRAY WOOD SIGN

RED, WHITE, AND BLUE rustic mini signs… yes!! Tiered tray signs are all the rage right now. If you’ve been on Pinterest, Etsy, or anywhere in between then you’ve definitely seen these little farmhouse looking beauties! They are usually made using a simple design and just tie in perfectly with the whole clean rustic look that’s in right now.

If you’re wanting to make your own mini wood signs it’s actually pretty easy to do. I make my tiered tray signs from 1x4’s that I cut down using my miter saw BUT even if you don’t have access to power tool you can still make your own mini wood signs! I’ve put together this DIY PATRIOTIC CRAFT KIT you can grab online in my shop. It comes with everything (except paint brushes) you need to make your own Independence Day signs at home. No need to go out and buy any fancy equipment or tools, especially if you don’t plan on making a ton of DIY craft projects.

If you are wanting to take the sign painting world by the horns be sure to read these 6 must haves for painting wood signs. I share the basic must haves to get you started on your own sign painting journey.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

DIY 4TH OF JULY WOOD SIGNS FOR TIERED TRAYS

Here’s what you’ll need to make your own set of patriotic wooden signs

If you purchased the PATRIOTIC DIY SIGN PAINTING KIT your wood blanks will come pre-stained. You can skip to the step #3

• pine 1x4 cut into these lengths: 6”, 10”, 12”

• Cricut cutting machcine

• Cricut Design Space

• Cricut green cutting mat

• oramask stencil film

• transfer tape

• vinyl squeegee

• stenciling sponge

• red, white, blue, black acrylic paint

• paint brushes

• stain color of choice

• lint free cloth

• gloves to protect your hands when staining

• Ryobi miter saw

• Ryobi sander

• 120 grit orbit sand paper

• xacto knife

• FREE CRICUT 4TH OF JULY CUT FILE

1. CUT & PREP YOUR WOOD PIECES

If you purchased the 4TH OF JULY DIY CRAFT KIT you can skip this step. If not you need to cut your 1x4’s to 6”, 10” and 12”. I use a miter saw to cut mine then give them a quick sanding with120 grit sand paper using my orbit sander. I stain my pieces then let dry for 24 hours. Once dry I sand around the edges to give it a distressed look. Now they are ready for paint :)!

2. CUT YOUR STENCILS

Cut out your stencils on your cutting machine, I use an older model Cricut explore and it always does a perfect job! I highly recommend using Oramask stencil film to cut your stencils out of. This material is specifically made for stenciling and performs very well. Weed your design and apply transfer tape to it so it is ready to go. Get your FREE Cricut cut files here to use for this exact 4th of July project.

3. PAINT YOUR BACKGROUND COLOR

Using a dry brush apply a THIN coat of paint on the front side of your wooden bases. For a more rustic look apply the paint so that it doesn’t touch the edge of the wood base and so that it a little uneven. Let that dry then paint a second coat. Let the second coat completely dry.

4. APPLY YOUR STENCIL

Using your vinyl squeegee apply your stencil to your painted wood base. Once you feel it is adhered good slowly remove the transfer tape off of your stencil. The best way to do this is to start at one corner and slowly roll the transfer tape off of your blue stencil material. PRO TIP: you never want to pull up when removing your transfer tape, this will cause your stencil to pull up as well. Use your finger to rub the exposed area of the stencil to work out any puckers or air bubbles.

5. PAINT YOUR STENCIL

Cut your stencil sponge into 3-4 sections, depending on the number of different colors you plan to use. Lightly dip the end of one of your stenciling sponges into your paint of choice, dab off excess paint onto a scrap piece of cardboard (or something similar) then using an up and down dabbing motion dab it onto the exposed areas of your stencil. Your paint coverage should be super thin, you want to be able to see the background color at this point. Let dry. Once dry dab on a second thin layer. If you are happy with the coverage you can move on to step 6. If you want a little more coverage wait for the second layer to dry then dab on a third layer of pain

6. REMOVE YOUR STENCIL

Using a sharp xacto knife or sewing pin peel your stencil up while your paint is still wet. Be careful not to touch the wet paint. Let your painted wood sign dry.

7. DISTRESS

This step is completely optional. If you want a little more rustic look lightly go over the front of your wooden sign with a sanding sponge or piece of sandpaper. I personally like adding this touch to my signs to give it a more farmhouse look. Wipe off the dust with a lint free cloth and you are ready to display them on your tiered tray.

DIY repurpose an old drawer into an American Flag

HOW TO REPURPOSE AN OLD DRAWER INTO AN AMERICAN FLAG

Before you pass up on the dusty old drawer that’s sitting on the side of the road you might want to think of all the amazing things you could turn that in to. Years ago my father in law had a huge old drawer sitting under his carport just collecting dirt and debris. I loved it! Even covered in gross beat-up contact paper I could still see the it’s potential of being something beautiful He told me I could take it home and then it sat in the basement collecting even more dust for years. Finally I pulled it out from the depths of the basement over the weekend and told myself I WOULD transform this old drawer this week!

 Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I really wanted to paint something American on it and after going back and forth in my own head I decided a simple flag would be perfect for this old drawer. I had thought about stenciling a big US map on it or even some lettering but with everything I already have on my plate I decided I should just keep it simple. Besides I don’t have a ton of vinyl and transfer tape to spare since I’m running low and shipments are taking a little longer than normal at the moment. With a little painters tape and a bit of vinyl I was on my way to making a simple rustic American flag.

Here’s what the old drawer looked like before I gave it a full facelift.

And this is what the old drawer looks like now. I definitely made a few mistakes but overall I’m loving how this rustic flag turned out.

If you are planning on doing a lot of stenciling on wood click here to read this post on how I save money on stenciling film.

How to make your own rustic flag

If you have an old drawer hanging around and collecting dust you can transform it into a rustic looking flag like I did with this one.

Here’s what you’ll need

• old drawer

• red, white, and blue paint

• paint brush

• painters tape

• masking tape

• chipbrush

• antiquing wax

• oramask stencil film

• transfer tape

• vinyl squeegee

• xacto knife

• sandpaper

• 50 stars Cricut cut file

• lint free cloth

Helpful tools

• Cricut cutting machine

• Cricut design space

• green cutting mat

• Ryobi sander

ONE-The first thing I had to do was sand it down. This drawer originally came with some gross contact paper attached to it. I had done the majority of taking all of that off when I first got the drawer. I removed the contact paper as much as I could then used the sander to help take off the rest. I started with 60 grit sandpaper on my handheld sander then worked my way up to 120 grit. the contact paper left behind some sticky residue but with a little elbow grease I was able to get all of it off. Then I used a lint free cloth and a vacuum to get off all the dust.

TWO- Using a dry brush I painted the inside of the drawer white. I used flat white indoor paint for this. When I brushed on the white base I made sure that all four sides didn’t get painted right up to the edge and I made the edges really uneven. I wanted it to look rough.

THREE- I measured out how big I wanted the blue area on my flag to be. I am not 100% happy with the size of this but it’s there to stay now lol! I taped that square off then started taping off my lines for my red and white stripes. I did this the same way I did this scrap wood 2x4 flag. I didn’t measure out my lines, mainly because I’m not a super precise person. I used the top edge of the drawer as my guide then taped off my stripes using wide painters tape. I did not make a true American flag though I only have 7 stripes total on mine.

FOUR- Once I had my stripes taped off I painted the exposed stripes red. Then let them dry and painted then with a second coat of red paint. I peeled my tape up while my paint was still wet.

FIVE- I stenciled the 50 stars on this rustic flag but did it a little differently than a typical stencil. I did what’s called a reverse stencil on this just like I did with this 4th of July leaning porch sign . I used my Cricut and Cricut design space to cut out 50 stars. You can get my free Cricut cut file here. Since my stars were wider than 11.5” I had to cut them out on two separate pieces of stencil material. But it wasn’t bad at all to piece them together. I did have a big OOPS moment when I weeded away a star. Thank goodness for an honest husband who told me it looked good other than missing a star! I was able to paint in the missing star before I had applied the wax, praise the Lord!

SIX- Using transfer tape I applied the star stencils to my flag then taped off the stripes. To cut down on paint bleed I sealed them with a thin layer of white paint. After that was dry I painted that part of my flag blue, let dry, then painted another layer of blue. While the paint was still wet I peel up the star stencils and the tape. I did have a little paint bleed but nothing too serious. This is when I added the last star that I missed :/.

SEVEN- I used my Ryobi sander to distress my rustic drawer flag. I used 120 grit sandpaper and lightly went over the entire flag then focused on random areas here and there. After I was happy with the distressing I wiped the sawdust off with a lint free cloth.

EIGHT- If you’ve read any of my other tutorials you probably know LOVE my antiquing wax. I use it for so many of my craft projects and of course used it for this one too. I used a chip brush and lightly applied the dark wax to my flag. If you’ve never used this stuff before please be aware that a little goes a LONG way. I usually dab the end of my brush into the lid then dab off on a cloth. Since I didn’t have a cloth handy for this DIY I used my apron.

I can’t wait to hang this rustic flag in our living room! We plan to keep it up year round and I know every time we look it we will think of fond memories of my father in la

I hope this post inspires you to give an old drawer a makeover! If you have any questions on this DIY or any of my other tutorials please feel free to ask away:)!

Happy Crafting!

Just starting out using your Cricut? See the top 10 supplies and accessories you need to get started.

How to TIE DYE using food coloring

Teach your kids the techniques of tie dying using food coloring

For a long while now my girls have been wanting to try their hand at tie dying so we thought why not make tie dye red, white, and blue shirts for the 4th of July that was coming up. But there was one slight problem, we were pressed for time and I had NEVER tried to tie dye before…ever. So we did some searching on Pinterest and found a TON of tutorials. We came across ones that used food coloring and I thought that would be a perfect starting point for us since we’d never tried this whole thing before.

It was a pretty great experience too! I’m so glad we tried this method first. I need to add that the food coloring does NOT stay in the fabric after being washed. There are steps that we could have taken to make it stay but I wanted their shirts to rinse clean so they could try other folding techniques and not have a million tie dye shirts in their closet.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional. This is just a way I can help add to our family finances to raise our four daughters. Please know I would never recommend a product or service I do not totally stand behind.

Click here for more kid friendly craft tutorials. If you enjoyed this TIE DYE craft watch the video below on how to stencil on a canvas bag. This is a HUGE hit for a birthday party craft.

Here’s what you’ll need

I picked everything up from my local Walmart & Dollar Tree, but I’ve included links if you prefer to order these items on Amazon and have them delivered right to your door.

• food coloring

• condiment squeeze bottles

• white t-shirt

• rubber bands

• measuring cup

• clothes pin

• gloves

• water

EASILY TIE DYE WITH FOOD COLORING

1. TWIST YOUR SHIRT

First you want to unfold your t-shirt so it is laying flat in front of you. Then pinch the middle and twist the shirt so it coils into itself. This was a little difficult for my girls to do so I did this step for them. But with a little practice I think they will master it in no time.

2. WRAP WITH RUBBER BANDS

Next, wrap a rubber band around the circumference of the coiled shirt. Then add several rubber bands going the other direction around the shirt so it doesn’t come undone. The method gives the shirt a traditional spiral look but if you want to learn other techniques I recommend reading Stephanie Lynn’s blog post about other tie dye folding techniques.

3. TIE DYE FOOD COLORING MIXTURE

Now you’re ready to start mixing the food color mixture.

I read another tutorial they recommended 8 drops of food coloring to 1/2 C of water. We mixed that at first but it didn’t seem like the colors were very bright. So we doubled the food coloring drops.

You’ll need to mix 16 drops of food coloring:1/2 C water we just poured it all into our squeeze bottles and gave them a good shake. I wasn’t sure how much solution we would use since we had 3 shirts to do and we ended up having to refill one red bottle and one blue bottle.

Their little setup was so cute I had to snap lots of pics!

4. APPLY THE FOOD COLOR MIXTURE

Then start squirting on the food coloring solution. If you don’t prewash your shirt you might have a hard time getting your shirt to absorb the liquid. This was us lol! So we gave our shirts a quick misting with a spray bottle with water in it and after that it soaked the food color water up just fine.

Keep squirting on the solution until your shirt looks like the one below. Again, we are first timers here but this worked for us so this is what we are recommending ;)!

5. LET IT SET

Other tutorials we read said to soak the shirt in salt water after you’re done squirting on the food color mixture. Then remove it after so many hours and let it sit for at least 12 hours…but we didn’t do that lol! We were pressed for time and this was a just for fun tie dye experiment to get our feet wet with the whole tie dying experience. But we did let our shirts set for 24 hours, mainly because we had a million other things to do {momma of 4 life}.

Keeping your shirt coiled up with the rubber bands still on it, place it inside a plastic bag and wrap the bag tight squeezing out all the air. Let sit for at least 12 hours.

6. READY TO WEAR

After it has sat, take it out and hang it inside to dry, away from sunlight. Once dry you can wear your freshly food colored tie dyed shirt right away.

My girls did some fancy cutting and tying on their shirts. The middle two even used some of their discarded pieces to make fun headbands to match their shirts!

Like I said above, this method is not permanent. It WILL wash out. But it was so fun for the girls to test the waters of tie dyeing. Look how adorable they are!! BTW the youngest of the four daughters didn’t want any part of the whole thing….life with a toddler lol!

In my opinion this is THE perfect way for kids to experiment with tie dying. They can do so many wrapping and folding techniques and if they don’t like it it will wash right out. And if they find a technique they love they can try their hand at the permanent stuff.

I hope you enjoyed reading this tutorial. My girls had so much fun with this!

Let me know if you have any questions below.

How to juggle it all during the summer when you're a WAHM

Is it possible to be a mompreneur during the summer months?

Yes, absolutely! Working from home during summertime with kiddos is, let’s just say a little crazy sometimes, but it’s still possible. I haven’t always been a WAHM so I’ve definitely had to adjust how we “summer” these days. And after a few years I think I finally found our happy middle. As long as I keep these 5 tips for how to juggle it all I can keep my sanity too.

Here are 5 tips to help you “summer” better as a work at home mom.

1. Set a MOM IS WORKING schedule.

This does not have to be the same every single day. In fact, ours changes daily. I create handmade décor & craft kits so my days are really pretty flexible and this type of scheduling works well for our family. If your schedule can’t be as flexible decide what days you need to work and be sure the ENTIRE family is on board. And then implement the schedule all summer long. I personally have chosen to work 3 days a week and scheduled off 2 fun days per week.

2. Let them help

If your kiddos are old enough and your type of business allows for it let them help you. Take the time to show them what it is you do. They will have a much bigger appreciation for your work AND they will love that they got to be involved. Some things our girls help me with in our crafty business is organize invoices, write thank you notes to our customers, and help with packaging.

3. Plan a bucket list

Planning a summer bucket list will give them something to look forward to all summer long. Even better, plan it together. Here is the summer bucket list that our family planned. They are all FREE things to do so I don’t even have the stress about finding room in the budget for a ton of summer activities.

4. Take an hour a day to tidy up the house

Keeping a tidy house will help you keep your mind clear. It’s when the laundry starts to pile up, the toys are scattered everywhere, and the bathroom counter looks like an explosion…don’t judge lol we’ve all been there…that your mind starts focusing on those items instead of what’s on the calendar for the day, whether it’s a fun or a work day. I take 20 minutes each morning to do some light chores and 40 minutes before my husband gets home from work we do the rest of the chores that need to be done that day. This has really helped me from getting distracted and staying on task for the day. We are a chore family so all of our girls, even our 3 year old, get involved in the housework.

5.. Take the time to unwind

For the most part I stop working my crafty job when my husband gets home from work. Although I could craft and create all day everyday it’s so important for my sanity, my marriage, and my job as a mom to take time to just let my brain unwind and breath. Enjoy a drink with your husband on the patio talking about your day. Jump on the trampoline with your kids. Take a walk as a family around the block. No matter what it is, take the time to be present with them every day.

I hope this list of managing your summer as a work at home mom helps. Remember to enjoy those precious babies, work will always be there but they won’t be little forever.

Summer 2019 Bucket List FREE things to do in KC

27 FREE THINGS TO DO IN AND AROUND KANSAS CITY THIS SUMMER WITH THE KIDS, especially if you’re a SAHM {stay at home mom}

Ahhhh summer! As a mom of 4 I know it can be super difficult to plan a summer on a really tight budget. And when I say a tight budget I mean spending ZERO dollars. I know it sounds like it’s impossible but with a little bit of planning it can be done. But after reading this you won’t be asking yourself or googling “what is there to do in Kansas City with kids”.

Before school let out I was on the hunt for all kinds of amazing adventures to take our girls on during our days while my husband was at work. But not just fun, I was specifically looking for FREE things. It was actually a little more difficult than I thought. I thought I could just google FREE THINGS TO DO IN KANSAS CITY and a magical list would pop up, I’d hit print and away we’d go. Nope, it didn’t happen like that. While there are great lists out there none were exactly what I was looking for for our family. The more I dug into these lists the more I found that a lot of the things listed weren’t open during the weekdays, they weren’t actually free {free with a membership doesn’t count if you have to buy the membership}, the places were way too far for us to drive, or they weren’t in operation anymore.

So my husband and I brain stormed and thanks to google we came up with a pretty decent list of things I could take the girls to during the weekdays. I promised them 2 days of fun each week and so far it is going great! And we thought how fun would it be to just explore the historic downtown areas of some local towns?! So we put that on our list too!

GRAB YOUR FREE PRINTABLE FOR KANSAS CITY SUMMER FUN

Be sure to check out other ways to get in some family time without breaking the bank .

So, here’s our list. 27 totally FREE things to do with kids in and around Kansas City.

DEANNA ROSE FARMSTEAD

Deanna Rose Farmstead is one I hear people talking about a lot. It is FREE when you attend M-TH after 2pm. Otherwise it is $3

KALEIDOSCOPE

Is always FREE. It is a magical place that lets kids create to their heart’s content. I advise you go early in the day, the earlier the better, and just a warning it can get a little crazy with field trips. But their staff does a great job at handling it all.

CHILDREN’S PEACE PAVILION

General public tours are held on Wednesdays & Fridays 9-4. While it is technically FREE they do accept donations.

BURR OAKS NATURE CENTER

It is open T-S 8-5 and has so much to offer families. Kids and grown up of all ages are sure to enjoy this if they are a nature lover. They have numerous trails, and outdoor kid’s discovery area, indoor kid’s discovery area, bird watching, snake feedings and so much more.

THE SPLASH PAD AT BURRUS OLD MILL PARK

This splash pad is new to Blue Springs and is something our girls can’t wait to enjoy. It is totally free unless you would like to rent a shelter house.

FREE PASS AT THE KANSAS CITY ZOO

If you live in JACKSON or CLAY counties the KC zoo MAILS out FREE passes for the residents in those counties to use during certain months. During the summer months they send out a FREE pass for JULY and AUGUST. Be sure to make your trip the best it can be with my tips for a stress free trip to the zoo

KANSAS CITY STREET CAR

The Kansas City street car is a wonderful addition to KC! It’s a FREE 2 mile ride through the heart of downtown. Definitely a must do in KC!

CROWN CENTER

While we don’t visit Crown Center for it’s shopping, it does offer some great things for families to do for free. Be sure you get your FREE 3 hour parking pass by getting a merchant to validate it, no purchase necessary.

NATIVE HOOVED ANIMAL ENCLOSURE {FEEDING THE BUFFALO}

This one is tucked away so be sure you use GPS to help get you there. Also, bring fresh veggies like carrots as there isn’t a place to buy feed once you’re there.

EXPLORE DOWNTOWN INDEPENDENCE

The historic Independence Square has SO much history to explore. This is truly one of our favorite historic places. Aside from Harry S Truman’s home there are so many things to see in such a small area. AND there are lots of unique photo ops too! Take your time and really explore this area.

FEDERAL NATIONAL BANK

This museum is FREE 9:30-4 M-F. Be sure to bring your photo ID. It is located right by Crown Center so make a day of it and visit all the things that area has to offer.

KANSAS CITY FOUNTAINS

Spend the day driving around looking at all the wonderful fountains that Kansas City has to offer. With over 200 fountains this is sure to keep you busy all day. Be sure to get this Kansas City Fountain Guide to assist you on your adventure.

EXPLORE DOWNTOWN LIBERTY

Downtown Liberty is truly a beautiful place. With so much history you’re sure to learn something new.

LIBERTY JAIL

The Liberty Jail is ran by the LDS Church. I’m going to be honest I had a hard time finding info on this one but we think it will be interesting to see.

LAKESIDE NATURE CENTER

Open to the public TUES-SAT 9-4. It is one of Missouri’s largest wildlife rehabilitation facilities and provides educational and recreational opportunities that focus on the environment.

EXPLORING LEXINGTON MISSOURI

Take a day and explore this beautiful town. There is a ton of history and beautiful houses galore.

PENGUIN PARK

Penguin Park is located in Kansas City and is one unlike any others around.

LEE'S SUMMIT HISTORY MUSEUM

It is open Thursdays & Fridays from 10-2 and Saturdays 10-4 and admission is totally FREE. Learn about the early days of Lee’s Summit.

EXPLORING DOWNTOWN LEE'S SUMMIT

While you’re at the Lee’s Summit History Museum explore the rest of what downtown Lee’s Summit has to offer.

WATERFALL PARK

Waterfall Park is located in Independence right off of Bass Pro. It features a pond, playground, small rock climbing wall, picnic area, and a walking trail. This park is very shaded which makes it nice on super hot and sunny days.

LIBERTY MEMORIAL

The Liberty Memorial is a MUST to take your kiddos to. While there is a museum you can pay to see, just visiting the FREE outdoor attraction is pretty amazing.

EXPLORE DOWNTOWN KANSAS CITY

See the fun sites of big city life in downtown Kansas City. Park the car and take a walk around.

UNION STATION

Such a wonderful place to take your kids! While Science City and other attractions aren’t free walking around and seeing all the amazing beauty and it’s history is enough reason to take a trip there.

HALLMARK VISITORS CENTER

The Hallmark Visitors Center is located right next to Kaleidoscope. It is open 9:30-4 M-Sat and is completely FREE.

MARBLE MOON COMPANY

Visit the Marble Moon Company M-Sat 10-5. Catch a marble making demo on Tuesdays, Fridays & Saturdays from 10:30-3.

WATKINS MILL

Take a trip back to the 1800’s and visit Watkins Mill. While the guided tours do cost money just driving through and looking around is FREE.

LEGACY PARK

Legacy Park is located in Lee’s Summit on 692 acres. The kiddos will love their destination playground.

I hope you enjoy this list our family put together. Everything I shared here is completely FREE unless you opt for the extras, those do cost money and I’ve listed them where they are applicable. Fill up the gas tank, pack a lunch and get ready explore the Greater Kansas City area. Let me know what else we should add to our list:)!

How to make an American Flag leaning porch sign

I just can’t seem to get enough of the patriotic décor these days! It started a few months ago when I made these fun fireworks from a wood 4x4 . Then I added this old classic to the blog, a hanging wood flag made from 1x4’s {you can find this handmade piece in my Etsy shop that sells like crazy this time of year}. And I had to make a tutorial of a red, white, and blue rag wreath. I tell ya, I’ve been obsessed lately with making these tutorials! And I have another one ;)!!!

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I had everything I needed on hand to make this but I’ve included the links where you can get some of these supplies. Yes, those are affiliate links but not to worry, you will not be charged anything extra if you make a purchase through them. They are just a way for this stay at home momma to help with the daily bills of raising our four little girls :)!

I promise this sign is SUPERRRRR easy!

Here’s what you’ll need

• 1x8x48 {4 feet}

• 1” paint brushes

• Acrylic paint, red, blue, white

• burlap

• masking tape

• chip brush

• antiquing wax

• 120 grit sandpaper

• vinyl star cut out

• wire {I picked mine up at our local farm store in the fencing area}

Handy tools

• RYOBI Sander

• RYOBI miter saw

• needle nose pliers

• wire cutters

• cricut cutting machine

First you need to cut your board and give it a quick sanding with 120 grit sandpaper. I personally LOVE working with Ryobi Power Tools. For years I used my husband much more industrial strength tools {he works commercial construction so his tools need to be crazy powerful} till I found these little gems and I have no plans of ever letting these guys go!

Then you need to paint your ENTIRE board white. Do one very thin coat, once dry add a second coat.

If you’re using a stencil cut it out while your board dries. I use my Cricut but you can use any vinyl cutting machine. The star I cut out was approx. 6” wide. If you don’t have access to one you can free hand your star. If going this route I recommend using a pencil when you do the outline.

Apply your star stencil to your board. Then decide where you want your blue line to stop below it. Measure that distance and make a mark on each side. I made mine approx. 9” from the top.

Now run a piece of tape from side to side where you made those marks. This will help to keep your line crisp.

Paint the entire top area blue. I used a royal blue but any blue shade that you like will be perfect. I painted two coats of blue, allowing it to dry completely between coats.

Remove the star and the tape.

I at first planned to paint two stripes of white and two stripes of red going down my board…big mistake. It was not as cute so I had to repaint it. I had to paint the bottom part red, because it is far easier to cover white with red than to cover red with white.

Using the same measuring technique as above but going vertically instead of horizontally, tape off the bottom so you have three equal stripes. If I wouldn’t have messed my stripes up from the beginning I would have taped them off the opposite from pictured below and painted inside the tape lines red. Instead I had to make more work for myself. I hope that makes sense. Just like with the blue, paint two coats and let dry between coats.

Then peel off the tape. Go in with a small paint brush and fix any mistakes if necessary.

Using your sander, sand around the edges, corners, and give the front a super quick once over. Then you’re ready to apply your wax. Check out my DIY mini wood pumpkin tutorial for a more in-depth how to on applying antiquing wax.

Add a piece of burlap. I tied mine off with a piece of floral wire but you can tie yours in a bow or a knot.

I added a couple pieces of baling wire just to give it a little extra cuteness!

If you love this piece but don’t have the time to make it and NEED it in your life ;) you can purchase one personally made by me here ————> AMERICAN FLAG LEANING PORCH SIGN

---

DIY 4th of July rag wreath

I love the shabby chic look for many reasons but mainly because that look is totally imperfect just like me. I’m a busy momma to four little girls so there’s no room in our beautiful chaos for absolute perfection.

Affiliate Disclosure. Some of the links on this website are affiliate links, which means that I may earn a small commission if you click on the link or make a purchase using the link. If you make a purchase you will not be charged anything additional.

I needed a new wreath for our front door for the 4th of July. I have been truly slacking in the red, white, and blue décor the last few years and really needed a spruce up. But I didn’t have the time to make anything big and wonderful and it’s not in our budget to make a ton of new decorations. So I decided on a RAG WREATH for our front door and I’m so glad I did! If you like this tutorial check out the DIY spring rag wreath I made.

save on Pinterest for later

Here’s what you’ll need

• 5 fat quarters of fabric, I found these at my local Walmart and even better I got a few of them in the clearance aisle!

• wire wreath form, I found mine at Dollar Tree

• scissors

If you love the big burlap bow go here ———-> to my HOW TO MAKE A BURLAP BOW tutorial.

Working with one fat quarter at a time, unfold and don’t worry about the creases. You won’t be able to see these. Going along the bottom make a small cut every .75”-1”. If you want your tie pieces to be larger make your cuts farther apart.

Now rip each of those cuts all the way to the other end using your hands, not your scissors. This will give your fabric a frayed looked.

After you have all your small cuts ripped cut each strip into 3rds like the picture below. Because I am a far cry from a perfectionist none of mine were the same size. If you like things a little more perfect than this you can measure these out.

Repeat these steps for ALL the fabric quarters.

After you have all your pieces ripped and cut into thirds start tying them to your wire wreath form. To make sure I had enough fabric to cover the entire wire form I moved to the next section before it was full and did that for all the sections. Then I went around and filled in the blank spaces.

Be sure you are staggering out your fabric prints. You don’t want too many of the same print in one spot.

You can leave it plain and simple or tie a bow to it like the burlap bow I tied to this one.

What do you think? Super adorable and SUPER easy to DIY at home!

---

Check out these other 4th of July DIY crafts.

12 tips to make your trip to the zoo even better and stress free

I love watching my girl’s faces light up when they see all the animals at the zoo. But to tell you the truth, I haven’t always loved actually going. I know all moms everywhere can relate. It can be so much work and STRESS to take your kids places like this by yourself. But it can be fun for you too you just have to change a few things up. For more fun stress free adventures with the kids check out my backyard camping tips.

Here are my top 12 tips to make your zoo trip even better.

1. Go to the zoo when it’s not crazy hot. When I’m hot I get grumpy, which really just means that I’m not enjoyable to be around lol! So we always go on days when this crazy Midwest weather isn’t scorching.

2. If you’re taking multiples have them wear the same color. I have four girls so I bought larger pink shirts from Walmart, so they could grow in to them each year, and those were our zoo shirts. This way it’s super easy to pick them out in the crowd.

3. Take a backpack. this is a must! Anytime we are going to be out walking around for extended periods I ALWAYS wear my backpack. I’m not a fashion forward kind of girl so this does not intrude on my style one bit. Comfort over fashion, that’s how I roll lol!

4. Don’t over pack. I know you’ll want to take everything but the kitchen sink but the truth is you don’t need everything. I used to be that mom and I learned that I don’t need to be prepared for EVERYTHING. The zoo is equipped with Band-Aids if one of my precious girls falls and skins her knee. So keep the load light and if you absolutely need something you didn’t pack it’s not the end of the world, the zoo will likely have what you need.

5. Pack the essentials. I’m talking wet wipes, ibuprofen for both you and the kids, Benadryl for the kids {this is a must with us because we’ve been in situations where we needed it asap for a yellow jacket sting and now I don’t go on trips like this without it}. These items are small and will fit easily and weightlessly in your backpack. Trust me, these are items you don’t want to buy once you get there. Talk about a convenience fee.

6. Pack a lunch. I don’t think we’ve ever bought lunch at the zoo. The prices there are crazy high so we pack one. If you choose to pack a lunch keep it simple. We usually take a sandwich, cut up veggies, chips, and something sweet for everyone. I’ve found if I keep my kids busy they don’t want to snack all day. So keep pointing out those animals and talking about them, they’ll likely not ask for a snack.

7. Take refillable water bottles. We usually take two and I keep them in the side pockets of my backpack. Our zoo has water refill stations everywhere there is a bathroom so we usually refill every time we stop to use the facilities. And with four kids we stop often.

8. Everyone NEEDS to wear comfortable walking shoes. We don’t ever wear sandals or flipflops, always tennis shoes because again, comfort over fashion ;)! Not having your kiddos complain that their feet are hurting from wearing uncomfortable shoes is a glorious thing! You might have to stand your ground before you leave the house but you’ll be SO thankful at the end of the day bc the jelly shoes little Susie wanted to wear won’t be giving her blisters today 🙌!

9. Pack sunscreen. Our family is full of fair skinned faces so we apply this a lot throughout the day. If your sunscreen bottle is a little too big to carry around all day get a small travel sized shampoo bottle from the Dollar Tree and fill that with your sunscreen.

10. Bug spray. If you live in an area with little flying evil blood suckers, in other words mosquitos, you will probably need this. Even on days when it’s not typical prime mosquito weather we’ve still encountered them at the zoo. I always take this just to be on the safe side. For some reason they REALLY love us.

11. Take quarters, enough for all your kiddos, to feed the animals. Our zoo has several areas that kids can feed the animals and sure enough the times when I forget quarters the change machine is down. So take enough for each of your children to get their own to feed for the animals.

12. Don’t feel like you have to see everything. The times when my girls and I have had the most fun at the zoo is when we go in without a plan. These are the days when I’m not stressing over making it in time for them to watch the birds get fed, or rushing through the animals so fast so we can see them all and we end up not really SEEING them because we rushed. Take your time and enjoy it. And if your kids want to stop and play let them play. Granted you’re there to see the animals but you’re also there to enjoy the day with your kids and if stopping for 20 minutes will make them happy, let them play.

As a mom of four this list has helped me tremendously enjoy our trips to the zoo. The important thing to remember is tip #12. It’s all about enjoying the day with those precious little souls.

---